Sequoia Hdm/VGA output problem
Hey, I have an Lenovo z50-70 with an I5-4200U and an iGPU HD4400, and after upgrading to the sequoia the VGA and HDMI port don't want to work anymore, is somewhere an fix for it, an I used OPCLP.
https://redd.it/1lcwnm1
@r_hackintosh
Tried 12 hours on this bit couldn't get it correct
https://redd.it/1lcxvei
@r_hackintosh
ASUS BT-400 (BCM20702A0) Not Working on macOS Sequoia 15.5 - Kexts Fail to Load
Hey everyone,
I'm hoping to get some help with a stubborn Bluetooth issue on my Comet Lake laptop running macOS Sequoia 15.5. I'm using a new ASUS BT-400 dongle, which is correctly detected by the system as a BCM20702A0 device, but it never initializes. The Bluetooth toggle in System Settings is unresponsive.
After a lot of troubleshooting, it seems the core issue is that the necessary Broadcom kexts are failing to load, even with the usual workarounds.
My Hardware:
Laptop: HP Pavilion
CPU: Intel Core i5-10300H (Comet Lake)
iGPU: Intel UHD Graphics (QE/CI is working)
RAM: 20GB
Audio: Realtek ALC Codec (Working via AppleALC, alcid=11)
Ethernet: Realtek RTL8111 (Working)
Bluetooth Dongle: ASUS BT-400 (Chipset: BCM20702A0)
OpenCore Version: 1.0.4
The Problem in Detail:
The system definitely sees the dongle. Both Hackintool and System Report show the BCM20702A0 device on a USB port. However, when I check the system logs, I see a repeating pattern of errors indicating that the kexts are not being loaded by the OS: kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmFirmwareStore) in helper to process load notification kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BlueToolFixup) in helper to process load notification kernelmanager_helper: Could not process load notification in helper: Could not find: Did not find identifier (as.acidanthera.BrcmPatchRAM3) in helper to process load notification
This leads to the BlueTool process timing out because the firmware is never uploaded.
What I've Tried So Far:
I feel like I've tried all the standard solutions, but none have resolved the kernelmanager_helper errors on Sequoia 15.5.
USB Mapping:
I have created a proper USB map using Hackintool, which generated an SSDT-USBX.aml.
In this map, the port for the BT-400 is correctly set to Internal.
USBToolBox.kext and UTBMap.kext are disabled to avoid conflicts with the SSDT.
The XhciPortLimit quirk is disabled.
Kexts:
I am using the latest versions of BrcmPatchRAM3, BrcmFirmwareData, and BlueToolFixup from Acidanthera.
The kext load order in my config.plist is correct (Lilu, VirtualSMC, then dependencies, then the BT kexts).
Kernel Block Workaround:
I tried blocking com.apple.iokit.IOUserServer with the Exclude strategy to force the system to use the older kextd. This had no effect, and the kernelmanager_helper errors persisted in the logs.
Kernel Force Injection:
As a last resort, I moved the three Bluetooth kexts (BrcmFirmwareData, BrcmPatchRAM3, BlueToolFixup) from Kernel -> Add to Kernel -> Force. This also had no effect, and the exact same kernelmanager_helper errors remain.
General Troubleshooting:
Reset NVRAM multiple times.
Tested the dongle in every physical USB port.
My Resources:
My current config.plist: https://pastebin.com/gN8cNbab
Full boot log (log show --last boot | grep -i -e "brcm" -e "bluetool"): https://pastebin.com/44NHGXx6
It seems like macOS Sequoia 15.5 has maybe changed kext loading in a way that defeats even the Kernel -> Force method for these specific kexts? Not sure.
Has anyone else run into this on Sequoia? Is there a new workaround, a different kext I should be using, or is this simply a case of needing to wait for the Acidanthera team to release updated kexts?
Any insight would be greatly appreciated.
https://redd.it/1lcuiq1
@r_hackintosh
Success macOS 26 Tahoe (Developer Beta) on Alder Lake (i7-12700k, RX 6800)
https://preview.redd.it/1u92v7lj9a7f1.png?width=2160&format=png&auto=webp&s=94757f528c58acd8cc47e8c9ec919a10732a2048
Specs:
CPU: Intel Core i7-12700K
GPU: AMD Radeon RX 6800
RAM: 32GB DDR5
Mainboard: MSI PRO Z690-A WIFI (WIFI is disabled)
WIFI/BT Card: Broadcom BCM943602CS (doesn't work yet)
Had to change some things in my EFI to make it boot (by this guide). And finally fixed the "start::509:Successfully initialized AHCI controller" error.
I previously used iMacPro1,1 as SMBIOS. With MacPro7,1, my CPU performance is much worse (Geekbench SC: 2560 to 1330 and MC: 14800 to 8410, macOS only, tested under 15 and 26). I tried iMac20,1 but the scores were also quite low.
https://redd.it/1lcru02
@r_hackintosh
macOS Big Sur Bootable installer for x230 in macOs
I'm trying to do it in macOS sequia and I can't see my efi volume
The Mount efi command is not the same as the pics at the dortania guide
https://redd.it/1lcmklu
@r_hackintosh
WiFi not working
https://redd.it/1lchesy
@r_hackintosh
Polaris in tahoe
when will apple release macOS Tahoe beta 2? maybe they will fix polaris...
I'm already dreaming of trying out the macos tahoe:)
RX 580
https://redd.it/1lcal9m
@r_hackintosh
Do it possible to install MacOS on HP pavilion gaming 17 cd-1000?
i tried to install macOS Ventura and Monterey, but I always got errors
https://redd.it/1lccy99
@r_hackintosh
Finally got latest version running "smoothly"
https://redd.it/1lcauf5
@r_hackintosh
How can i install Ventura on sandy bridge (laptop)?
title,
Hello, i was able to hackintosh a HP pavilion DV6 notebook from 2012 using macOS monterey 12.01,(typing this on it rn!) and i want to try newer versions of macOS ventura+ but it always panics from "appleacpicpu=7" which could be because my CPU doesn't support AVX 2.0, i heard people say to use CryptexFixUP.kext but i tried it no luck... it always panics on ventura and newer. So if any of you have a fix for my panic Please let me know!, i can provide the EFI, pictures, and videos Just Tell me!!.
****Device Specs****
CPU: Intel Core i7 sandy bridge ( i7-2670QM)
RAM: 16Gb DDR3
GPUS:
* Intel HD 3000
* nividia geforce gt 630m (disabled)
Wifi:
Intel centrino wifi card (working with airportitlmw.kext)
Bluetooth working great with bluetool fix up ketx
OS: macOS monterey 12.01
USB MAPPING:
* 2 usb 2.0 ports
* 2 usb 3.0 ports
***********************************************************************
Again if you want pictures, video, or EFI folder just let me know! thanks for any help provided
https://redd.it/1lc7gqo
@r_hackintosh
Which method is preferred to enable RX 6650 xt?
I see there are two options. One is to use whatevergreen and an aml to spoof the device id of the rx 6600 with boot arg agdpmod=pikera. The other option is rotor kext that doesn't require a spoof or boot arg.
Both seem to work but I am wondering if one method is preferred.
https://redd.it/1lc5xw3
@r_hackintosh
macOS 26 can't log in
https://redd.it/1lc2pcy
@r_hackintosh
Updated from sequoia to Tahoe 26.0
https://preview.redd.it/6rx0hrm3637f1.png?width=2560&format=png&auto=webp&s=36acd35ed41be77214ac625aeffcb1630d5fc6e6
Used the same OC 'traditional' build, just updated OC to the lastest commit (1.0.5), also changued device(in config.plist) to iMac 20,1 or iMac 20,2
Specs:
\- Asrock b760m DS5
\- i5 14400F
\- 32GB 5600Mhz
\- RX 6600 8gb
\- WD BLACK 750
whats not working ? ( or maybe need an aditional config)
\-bluetooth (asus bt-400)
https://redd.it/1lbzk8t
@r_hackintosh
What is going to be the future of Hackintosh?
What is going to be the future of Hackintosh? Maybe Apple will switch architecture again or some ARM PCs could be supported.
https://redd.it/1lbxjyq
@r_hackintosh
Hackintosh instalation on external HDD?
Hello, I have a question: is it possible to install Mac OS on an external drive on USB 3.1 and then run it, or is it only possible on the internal drive?
https://redd.it/1lbvav6
@r_hackintosh
stuck on kernel panic on hackintosh monterey
hello i been trying to hackintosh this lenovo thinkpad e14 gen 1 but after installation im stuck at this kernel panic sreen please help
https://redd.it/1ld0ui9
@r_hackintosh
Unable to erase disk in installer
https://redd.it/1lcwzru
@r_hackintosh
What is this that appears on boot?
https://redd.it/1lctx5t
@r_hackintosh
Non stop installing error
||
||
|CPU|Intel Core i3-7100 (Kaby Lake) @ 3.90 GHz|
|iGPU|Intel HD Graphics 630|
|Motherboard|ASUS H110M-CS|
|Storage|240GB SATA M.2 SSD |
|macOS Target|macOS Ventura|
|Hackintosh Goal|Dual-boot macOS Ventura + Debian (with OpenCore GUI Picker)|
Efi : https://drive.google.com/file/d/10PuQkqauEFx6kxTReN9ZSanpkofQbMON/view?usp=sharing
Verbose images : https://drive.google.com/file/d/1H2OdP-hkn\_et-HoPR1pCSDiodbTcYTPS/view?usp=drive\_link
i mostly used oc auxillary tool for this
https://redd.it/1lcqcqe
@r_hackintosh
Cannot downgrade firmware for surface laptop 3
https://redd.it/1lckyf6
@r_hackintosh
Support for Intel core i5 13420h with intel uhd graphics 770
So i was told on the discord server that my gpu isn't supported, and from what I've seen, it is not.
But isnt there any way to get macos running on my laptop? (Lenovo IdeaPad slim 3 15irh8)
https://redd.it/1lcfd4m
@r_hackintosh
Stuck on Apple Logo Without Progress Bar When Booting macOS Sequoia Recovery USB (OpenCore 1.0.4)
https://redd.it/1lcbxgi
@r_hackintosh
Can anyone help me install Mac os Sequoia
I have a HP elitebook 800 G2 65W i5, 8gb RAM, nvme 250 gb ssd,
any video?
https://redd.it/1lc5juw
@r_hackintosh
Stuck on EB|#LOG:EXITBS:START
Hardware
Gpu:rx 6800
Cpu:ryzen 5 5600g
Mobo:msi b550 tomahawk
Wifi:intel ax 200 wifi
im not using the intergrated graphics
heres my EFI
https://redd.it/1lc76gv
@r_hackintosh
無法進入開機畫面 | can't enter the installation screen
如同標題,我在EB介面卡住了,試了很多次都無法進入介面
As the title, i'm stuck in the EB interface and cannot enter the interface after trying many times
OS:MacOS Sequoia 15
CPU:AMD 9900x 12 cores
Motherboard:ASUS PROART B650
GPU:AMD IGPU(false) R T X 3070(false) GT730(true)
https://preview.redd.it/lm6ufw11a47f1.jpg?width=1419&format=pjpg&auto=webp&s=0c826d33ab67b9651310a08cd1d2b22ce0bae92e
EFI:https://drive.google.com/drive/folders/1Oejesdyp24bjobde9VzT2L5dJmEGlk4o?usp=drive_link
有開啟日志,但無內容
The log is turned on, but there is no content
https://redd.it/1lc4b3e
@r_hackintosh
Usb Wifi wont work
so i recently bought a lb-link bl-wdn650a ac650mbps wifi adaptor for my hackintosh ventura (it was the only one i could find in my country ) and this adaptor was supported by the chris111 drivers , i downloaded his drivers and many more but the usb will still show as a disk on the mac system info , if theres any way to fix i would appriciated , thanks !
https://redd.it/1lc0cju
@r_hackintosh
Install macOS Lion onto a 2014 Mac Mini (still intel so yall can help probably)
Look, this isn't technically a hackintosh question but the mac is still an intel and it's unsupported so yea...
Anyway, everyone I have asked has said that if I try to install Lion on newer hardware I could break my bios and never be able to boot my yosemite usb. I need some way to either patch the installer, or gaslight the installer into thinking it's on an older mac. Nobody else has been able to provide tips.
Please, help me with this.
https://redd.it/1lbz9pt
@r_hackintosh
HELP
hi, so first off I am new to hackintosh and I don’t really know anything about it, anyways I want to know if I could at least maybe install macOS Ventura or later on my laptop? The only thing I saw that isn’t compatible is the WiFi card.
Specs:
ASUS X550CC—XX086D
processor (CPU): Intel Core i3-3217U (3rd Gen “ivy Bridge”)
Graphics (GPU): Dedicated NVIDIA GeForce GT720M 2GB DDR3 dedicated memory
Integrated: Intel HD Graphics 4000
Memory (RAM) 12GB DDR3
Storage: HDD-500GB
And if could someone help me turn off the NIVIDA GPU? Cause I’ve seen that the nivida one doesn’t support newer macOS
https://redd.it/1lbwwtk
@r_hackintosh
OS X on old dell laptop(help with graphics)
Hello everyone, I found an old Dell Studio 1535 laptop, I made a working EFI for it and it ran El Capitan, though without graphics acceleration, it has an ATI HD 3450, I wanted to ask if there is any version of OS X on which this card could work, here are the full specifications
intel pentium dualcore t2390(merom)
ATI HD 3450
128 gb HDD
4gb of ram
https://redd.it/1lbvh31
@r_hackintosh
