How to get Volume Adjust on Motherboard 3.5mm back-port ?
1. On motherboard port is always on full volume
2. connecting mic on 3.5mm front panel disable speaker connected on back
ALC1220 on MSI B450 Gaming Pro Carbon AC.
When I used clover it needed config but OpenCore automatically fixed it with default layout 1 but after installing RyzenPowerManagement it stopped working (probably that)
# From Doratania Guide for ALC1220
1 Worked but no Volume Adjust randomly
2 Not Working
3 Working but no Volume Adjust on Backport, if also front connected (mic or/and headphones) volume adjust option is available don’t know if it works. Mic in Works
5 Working but no Volume Adjust on Back port
7 Working but no Volume Adjust on Backport
11 Working but no Volume Adjust on Backport and loudest
13 Working but no Volume Adjust on Backport and loudest 2nd
15 Working but no Volume Adjust on Backport and loudest 3rd
16 Output not working
21 Working but no Volume Adjust on Backport
27 Output not working
28 Output not working
29 Output not working
34 Not Working maybe didn’t raise volume on speaker
# github.com/acidanthera/AppleALC/wiki/Supported-codecs All from Doratania Guide and these -
0x100101, 0x100003,
17 Output not working
18 Output not working
20 Working but no Volume Adjust on Backpanel, FrontPort works, Input not working
25 Output not working
30
35
98
99 Working but no Volume Adjust on Backport
100 (Test Again)Working but no Volume Adjust on Backport
# Clover
1 - Output Working Input Not
2 - Not Working
3 - Output Working Input Not
15 - Not Working
16 -
21 - Output Working Input Not
30 - Not Working
34 - Not working
https://redd.it/1ecjksy
@r_hackintosh
Dortania OpenCore Install Guide not accessible for me! Server issue, ISP issue or Geofencing?
I have been receiving the following error on Firefox, Brave and Safari both desktop and mobile over the past week when trying to visit: https://dortania.github.io/OpenCore-Install-Guide/ - This has previously been working for years.
All other sites work fine including Github and Gitbook as well as my own site here.
Has anyone else been experiencing this, especially outside the US? Do you think this is a Server issue, DNS issue, ISP issue or geofencing problem or some otrher networking issue? What would you try to fix this?
Error shown on Firefox
Error shown on Safari
The only workaround I found was to use a VPN server to the US, but this is not a satisfactory solution for me.
Specs:
- Current versions of Brave, Safari and Firefox on macOS Ventura and iOS 17.5.1
- Country: Philippines
- ISP: Globe Fiber via Ethernet and Wifi
https://redd.it/1ecgmec
@r_hackintosh
Ventura restarting after login
https://www.tonymacx86.com/attachments/config-plist.584058/
https://redd.it/1ecg9uk
@r_hackintosh
Can I get some help getting Mac Os X 10.5.5
My specs: a 1.7 gigahertz pentium M, with Intel gma graphics, and 1 gb of ddr2 ram/ or ddr1 ram (I'm not completely sure) Computer: hp pavilion slimline s7517c PC
I have been trying multiple different hackintosh versions every single one refused to boot the installation, and or downloaded, but I got stuck in a reboot loop without even getting the welcome video or into the system, the installers usually run fine only from a disc, and I have changed the bios settings to use IDE and SATA drive configurations, yet no matter what I tried they did not work, I just want to see if I could get any help, according to the diagnostic messages as well it reads the device and starts to boot then it just reboots, any help would be appreciated
https://redd.it/1ec9ivn
@r_hackintosh
I'm trying to run hackintosh on a modern Lenovo laptop
https://redd.it/1ec2kgf
@r_hackintosh
Which macOS is better?
Recently, my relatives gave me a computer. My father helped me pick it up and said that you can send this computer to a country house, where my aunt's husband and I will use this computer. What hackintosh (macOS) should I put on the Radeon X1950 Pro? ChatGPT gives me this hat:
>The following macOS versions are recommended to successfully install Hackintosh on this video card:
>macOS 10.6 Snow Leopard is one of the latest versions of macOS that can support such an old graphics card.
>macOS 10.5 Leopard – This version may also be compatible and probably more stable on older hardware.
Adding: maybe I'll put in a slightly better video card, if the computer can take it, of course
https://redd.it/1ec2w0y
@r_hackintosh
Couldn’t alloc class “AppleKeyStoreTest”
Hi, i'm trying to do hackintosh on my pc but i have this error, how can i fix? I have a b760 gaming x ddr4, i5-13600kf, rx 580
https://redd.it/1ebyl3f
@r_hackintosh
Stuck on OC Boot menu. help me. please
https://preview.redd.it/4kqpl6tmsoed1.jpg?width=2117&format=pjpg&auto=webp&s=521b1f19b747b8e1b609b99e23c71fb7fa3d1370
I'm trying to install mac os sonoma on my desktop, but it gets stuck when I choose my USB(external) on boot menu(The picture showing the boot menu is not from mine, but it is identically same except that I just have one windows entry). It does not even boot into Opencore GUI. So, what I've done are....
Checked my EFI and filesystem a lot of times(I'm not an expert in hackintosh so it might contain errors that I might not have found, so It will be grateful if you can check my efi one more time)
tried different SMBIOS
En/Disabled xhci portlimmit/Hideauxiliary
re-downloaded dmg
formatted Usb(FAT32, Exfat) for a few times by rufus
editied Bios settings to guide
And Hardwares that I use are...
AMD R9 5900X
(AMD)SAPPHIRE NITRO+ RX 5700 XT
ASUS TUF B550m plus wifi(Ethernet:Realtek RTL8125B, wifi:Intel AX200, audio:Realtek ALC S1200A)
KLEVV DDR4-3600 CL18 CRAS X(hynix Die)
SSD1:980PRO 1TB(For windows)
SSD2:WD SN770 250GB(For hackintosh)
SMBIOS I use: imac 20,2
https://preview.redd.it/1x4w4czewoed1.png?width=670&format=png&auto=webp&s=0610982ae5aa300c28a38fab2f1f73e57857a9a9
And Kexts that I use&their order
Here's link to my EFI folder google drive
Video that I followed (I also followed Dortania's OpenCore Install Guide)
please help me find my problem.
Note: As my first Language isn't English, there could be sentences that are grammaraticaly incorrect or unnatural. Please understand.
https://redd.it/1ebz473
@r_hackintosh
Bluetooth audio cracking every 30 minutes in Windows using fenvi T919
Good evening everyone.
I'm currently having a problem regarding bluetooth with my fenvi T919 card in Windows . They are working perfectly but every 30 minutes after having connected the headphones the sound will be crakcing during 4-5 seconds. No such behavior in MacOS.
Only recurrent i've found using event observer is this warning message :
>*The local adapter does not support a Low Energy controller state important for peripheral mode support. The minimum required supported state mask is 0x2491f7fffff, and received 0x1fffffff. The Low Energy peripheral role functionality will not be availabl*e.
My configuration :
* Windows 11 pro latest version (same problem in W10 pro 22H2)
* I7 10700K/Z490 Gaming Plus/32 GB 3200 MHz
* Wifi/Bluetooth : Fenvi T919 PCI-E Card
* BT Headphones Bose Headphones 700/ Marshall Major Bluetooth III (same problem with the two headphones).
* OpenCore 0.9.4 (can give more info if necessary)
* Bootcamp installed on Windows
What i have already check/test, without success :
* Reinstall BT card drivers using the one given by fence and even more recent version found on internet.
* Windows integrated problem solver
* Wifi disabled
* BT RFCOMM PROTOCOL disabled in device mgmt
* Sound enhancing disabled
Anyone has encountered this/ have any idea how to solve it ?
Thank you very much for your help !
https://redd.it/1ebvv8e
@r_hackintosh
Black screen after verbose using RX6600
Hello ! I have this list of hardware:
i5-13400F
Gigabyte RX6600
Gigabyte B760M-C
980GB M.2 NVMe
When i try to boot it boots but after verbose (i enabled -v in bootargs) it goes black screen then no signal, i tried many solutions even found i forgot VirtualSMC.kext but it didnt help, may someone guide me (i have agdpmod=pikera of course).
https://redd.it/1ebqv7s
@r_hackintosh
Will Apple silicon Macs ever run unsupported macOS?
Hi. I'm planning to purchase an M1 MacBook in about two years, but I'm concerned that by then, Apple may have discontinued support for macOS on this model. This raises an important question: Will it be possible to run unsupported versions of macOS on the device? While I'm not particularly knowledgeable in this area, I wonder if Apple might have implemented additional safeguards on their silicon to prevent the use of operating systems that weren't intended for it (though Asahi is an exception).
https://redd.it/1ebp7vn
@r_hackintosh
Best budget GPU for Sequoia and Sonoma Mac?
I wish a full compatible GPU for hackintoshi for both the system (Sequoia and Sonoma) is RX 6600 the best?
https://redd.it/1ebn3tg
@r_hackintosh
Does Intel latest gen cpu works normal?
I'm making a new configuration for a hackintosh, I can see everywhere they recommend the 10th Intel gen, but it's a bit old .
My question is : will a 13th gen Intel cpu work with no required workaround, compared to a 10th gen cpu?
https://redd.it/1eciinw
@r_hackintosh
Sonoma UB-400 Bluetooth issue
Hello,
Im using UB400 dongle for Sonoma. And was using only Bluetoolfixup.kext. Bluetooth works but with few issues.
1- I cannot reconnect Airpods. Everytime i need to use them I have to forget them from settings and re pair.
2- Audio doesn't automatically switch from iPad or iPhone which is using same apple id.
Does anyone know how to fix this? previously it worked flawlessly. I also tried adding BrcmFirmwareData.kext and BrcmPatchRAM3 it didnt fix the issue.
thanks in advance.
https://redd.it/1ecgwmz
@r_hackintosh
Can I get some help getting Mac Os X 10.5.5
My specs: a 1.7 gigahertz pentium M, with Intel gma graphics, and 1 gb of ddr2 ram/ or ddr1 ram (I'm not completely sure)
Computer: hp pavilion slimline s7517c PC
I have been trying multiple different hackintosh versions every single one refused to boot the installation, and or downloaded, but I got stuck in a reboot loop without even getting the welcome video or into the system, the installers usually run fine only from a disc, and I have changed the bios settings to use IDE and SATA drive configurations, yet no matter what I tried they did not work, I just want to see if I could get any help, according to the diagnostic messages as well it reads the device and starts to boot then it just reboots, any help would be appreciated
https://redd.it/1ec9iai
@r_hackintosh
Help on turning a computer into mac os x
So for a little context, I am trying to turn my old imac that now has linux back to having el capitan as its operating system.
Im a little confused on what to do, with the apple official instructions not working since their official download is a pkg and not dmg. And i havent understood much help from what i find online.
The big question is how I can make a bootable usb or what guide to follow that I can do this? It may not be a hackintosh in the sense, but i am trying to find if any information or tools can be used to make the mac osx el capitan can be put back in the original hardware.
https://redd.it/1ec9yah
@r_hackintosh
Hackintosh on Core i5 2500
I have a Desktop with a TGT Tomahalk 400w Power Supply, a Asus P8H61, 2 HDD's with one 500gb and another 1tb, a Core i5 2500 and 8gb Ram, a PCI-Express audio card (CMI8738), a TP-Link PCI-Express Wi-fi card and a generic case. Thats no have a GPU.
Soo, in this hardware will be possible install a Hackintosh? And that possible, is too dificult? And that possible, in some macOS Version?
https://redd.it/1ec7k6p
@r_hackintosh
Which hackintosh or Macos version my PC or laptop is compatible of?
PC specs:
Intel xeon e3 1270 v2
Nvidia Quadro 2000 1gb ddr5
Laptop specs:
I7 5500u i7 5th gen
Intel hd graphics 5000
Kindly help me as I want to run Sonoma can I ?
https://redd.it/1ec5uvo
@r_hackintosh
AMD laptop stuck at HID:Legacy Shim 2
Hi mates, i was trying to install macOS Big Sur when i kept repeatedly getting stuck at "HID: Legacy shim 2" during initial boot. I whitelisted all the MMIO spaces and tried installing GenericUSBXHCI.kext, to no luck
my log: 2 - Pastebin.com
My kexts:
https://preview.redd.it/cnxsx3np4ped1.png?width=616&format=png&auto=webp&s=343b802feeab23949c3ec4360a8205a9480f49e8
https://redd.it/1ec00ag
@r_hackintosh
Successful macOS installation, but low Geekbench score
OS: Ventura 13.6.7 with OpenCore (MacPro 7,1)
https://preview.redd.it/fr2emudjtned1.png?width=1350&format=png&auto=webp&s=3a5af67c68df708a0e8516b25c43f1128090bc27
https://preview.redd.it/3jht4no0uned1.png?width=1349&format=png&auto=webp&s=41ff490e4826b7e960a61f6914b25697fb4b5640
Motherboard: Gigabyte Z790 AORUS ELITE AX
CPU: Intel Core i7-14700K
GPU: AMD Radeon RX 6600 8 GB
on Windows geekbench score: 21080
on macOS geekbench score: 19268
CPU and RAM Overclocked.
Can someone tell me why there is a big difference? Thanks for your help!
https://redd.it/1ebtw2z
@r_hackintosh
Question about SMBIOS
i have kaby lake with i3 8130u proc, succesfully installed ventura with SMBIOS iMac18,1.
So i want to install sonoma on this setup, can i use iMac19,1 smbios? is there a problem using other smbios for kaby lake?
https://redd.it/1ebuicg
@r_hackintosh
can i get an efi for hp elitebook 745 g6
for amd ryzen 5 pro 3500u and i got some efis online but they were stuck on loading and i want that to install mac os ventura on it
https://redd.it/1ebrlhb
@r_hackintosh
ACPI Error
Hi, i created a macos monterey installation usb for my Dell presion m4800
CPU: i7 4900mq
RAM : 12GB
GPU: AMD Firepro m5100 with switchable graphics disabled
WIFI: intel centrino Ultimate n 6300
when i booted it it gave me this acpi error:
https://preview.redd.it/ymrptotukmed1.jpg?width=1280&format=pjpg&auto=webp&s=0a06712933b247511e4db1d42b97c07a3a9e3f37
here is my EFI folder: https://drive.google.com/drive/folders/1j00BTYaWkxY-Ov9YVA7AhbM-KQ54OhHF?usp=drive\_link
this is my first installation and i don't know much
https://redd.it/1ebpogn
@r_hackintosh
Upgrade from Ventura to Sonoma 14.5
Hey guys, need help with upgrading from ventura to sonoma 14.5. I've been following these steps https://dortania.github.io/OpenCore-Post-Install/universal/update.html#updating-opencore and I tried to install the macOS sonoma on the same ssd as my Ventura, everything seems to work but when the installation process is done I'm booted back to my Ventura. What can be the problem?
EFI link: https://drive.google.com/drive/folders/19b6aXFWm\_AyGq\_5c1E2F6-rvILT2racg?usp=sharing
Thank you :)
https://redd.it/1ebo1m3
@r_hackintosh
EFI; partitions on install USB
I have an .iso of Sonoma. After I extract the content do I copy it to a USB drive with one primary, active partition or do I need a separate partition (active) for the EFI folder? Never having unpacked a MacOS .iso I don't know if there will be a generic EFI folder I can modify for my processor type or if I must create one from scratch. Thank you for any advice.
https://redd.it/1ebm3oe
@r_hackintosh