Hello please l need help to install hacintosh on Dell Intel core i5 8gen with dual boot (windows) please all step l doesn't know anything about it . Thanks you
Please need help !
All step to install hacintosh on Dell Intel core i5 8gen. Please
https://redd.it/1e9n7r5
@r_hackintosh
Macos wont boot after installation.
I have installed of althleast tried to install Mac os Ventura on my hp envy 15 notebook pc following this tutorial https://youtu.be./GGy3V3YT6tI?si=dsL3yb3sJlUjuGTK
But it Gers stuk around thé security policy.
Can aneyone please help
Link of thé video of bootup
https://photos.app.goo.gl/Qa7VMqtNTNwpq9bKA
https://redd.it/1e9ldn8
@r_hackintosh
Gen). Before at stock, the card was hot, noisy : 75C, 240w power consumption... So undervolting is always a good idea especially with reference models. War Thunder is also much more stable now. I only lose around 1/2% performance... negligeable while the gain is not !
- Every video outputs work fine, even the USB-C output that I use with my portable gaming monitor. Audio works fine too.
- AMD Drivers : as always, bad under Windows. Resizable-bar needed to be disabled in BIOS and set to -1 in the config.plist because it prevented booting Windows from OC picker... The AMD Drivers were the source of the issue. I'm using the latest AMD Adrenalin driver.
Not the best pic of this damn sexy madame...
Dual PCie devices on a single PCie x16 slot ?
- Mini-ITX boards only have a single PCie x16 slot for PCie devices, mainly GPUs. But with a PCie bifurcation riser, you can split this slot in two : x8/x8. So the first x8 lanes are used for the Fenvi T919 and the second ones, for the RX 6900 XT. The card doesn't lose performances from that (1%...). I use the C-Payne riser. Not cheap but normal for a niche product. You can find PCie 4.0 variants from chinese brands in Amazon or AliExpress. I used this specific riser with my first ever Hackintosh : a RTX 3080 alongside a RX 550 Lexa core for MacOS Ventura !
A very niche product, but useful ! The PCB is powered by a 4pin CPU connector.
SFF enjoyer
- Since the first time I met hardware components, I'm fascinating by compact computers. When I was younger, I was wondering if it was possible to stick a full-size GPU in a portable case. The dream was already existing in the form of the Mini-ITX form factor, more precisely, the SFF world. Since, I had tons of ITX cases. I'm actually running the Meshlicious from SSUPD. Pics will be added later. I need to clean it.
- So with my portable gaming setup, I can do everything I want, everywhere. I chose this form factor because I travel a lot ! I'm a student...
Sonoma 14.5 and Sequoia Beta 3 ?
- I use the original EFI of this config under both of theses MacOS versions without any noticeable issues but I found MacOS Ventura to be more stable : it supports natively the Fenvi T919 without patching it with OCLP. Indeed, I had to disable SIP and SecureBootModel, things that I didnt' want in my Hack'.
Future improvements
- Want to upgrade my Ryzen 5 to a Ryzen 7 7800X3D. I will receive on wednesday a 32Gb DDR5 kit to replace my single 16Gb stick : Crucial Pro 6000MHz CL36 DDR5. I will also replace the actual CPU cooler for a low-profile Thermalright. Maybe an AXP90.
- A good PBO optimization for my CPU.
- The biggest upgrade will be an investment in a LG C2 42" Oled TV to play Ghost of Tsushima, Assassin's Creed Odyssey, ... in 4K. Buying it after my summer job.
- Buying Airpods Max (and I'll see if it works fine with Hackintoshes) and an Apple Magic Trackpad.
"Could you share your EFI ?"
Honnestly, no. But I can provide you help here in the comments or in pm. Hackintosh is all about learning, troubleshooting, ... You can ask for help in the AMD OSX Discord server (great people) or in the Intel Discord Server. MacOS86.it is also a great place.
Feel free to ask me any questions that come in your minds ! I'm open and kind (it depends on the mood). I love helping people with SFF hardware...
Vive l'Empereur (French touch) ! 🇫🇷🦅
https://redd.it/1e9hc4t
@r_hackintosh
Need help, looking to build a dual boot hackintosh / windows
Hi, i'm new to hackintosh but I'm looking to build a dual boot hackintosh / windows. I want it to be able to support high-end gaming on the windows side. I need a list of parts and what MacOS would be supported. Thank you so much!
https://redd.it/1e9gh6d
@r_hackintosh
Hackintosh Sonoma ALC4080 Audio issue
Hi!
My problem is that sonoma 14.5 only detects hdmi audio. Before with earlier versions i had an option for internal speakers and my home theatre worked perfect. ALC4080 detected as usb audio but it is not showing at all as before.
What should i do to make it work?
I tried apple alc kext with alcid 1 2 11 13 no success. Previously i just had to install sonoma and the usb audio was detected and show up.
MOBO: MSI Z790 MAG TOMAHAWK DDR5 WIFI
hackintool usb audio detected
usb audio not detected as internal speakers
https://redd.it/1e9dwyk
@r_hackintosh
[Help] Latitude E5570 and installing any MacOS version!
Hardware:
* CPU: Intel Core i5-6300U
* GPU: Intel Skylake HD Graphics 530
* RAM: 2x8GiB Crucial/Micron 2133MHz DDR4
* Motherboard/Laptop model: Dell Latitude E5570
* Audio Codec: ALC293
* Ethernet Card: (Disabled Intel I219-LM(reported by GNU/Linux since devtree didn't report it))
* Wifi/BT Card: Intel Wireless 8260 (works in my ma's Hackintosh, though different Latitude model)
* What guide/tool followed: [https://osxlatitude.com/forums/topic/17051-dell-latitude-e5570-hackintosh-efi/](https://osxlatitude.com/forums/topic/17051-dell-latitude-e5570-hackintosh-efi/) [https://github.com/quynkk1/e-series-skylake-hackintosh-dell](https://github.com/quynkk1/e-series-skylake-hackintosh-dell) [https://dortania.github.io/OpenCore-Install-Guide/prerequisites.html#prerequisites](https://dortania.github.io/OpenCore-Install-Guide/prerequisites.html#prerequisites) [https://github.com/manhhungdoan/Dell-E5570-Hackintosh](https://github.com/manhhungdoan/Dell-E5570-Hackintosh) [https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/kernel-issues.html#stuck-on-eb-log-exitbs-start](https://dortania.github.io/OpenCore-Install-Guide/troubleshooting/extended/kernel-issues.html#stuck-on-eb-log-exitbs-start) (plus many searches here on Reddit involving E5570 and Skylake)
* What part I got an issue with: Cannot boot the installer. No matter what I've tried, it either hangs on the apple logo for about 3 minutes before locking up completely, or it acts like it's booting (even shows the progress bar), gets about 1/3 of the way through, then rolls the progress bar back and shows a 🚫 before rebooting. When in verbose mode, it always seems to hang on \[EB|#LOG:EXITBS:START\] but the guide for that (last link above) hasn't gotten me beyond that point yet.
* What files/config I am using: Unmodified and modified configs from the sites above; tried many, many "MacBookPro##,#" SMBIOS types; and my own config.plist edits.
* Extra Info: I also tried swapping NVMe (WD Black SN770 512GB) and SATA (Micron 1100 512GB) M.2 drives around. I've tried booting from USB 2.0 SanDisk Cruzer Glide 32GB, Lexar(Micron) USB 3.1 128GB, USB3 <-> SAS/Intel 240GB SATA SSD adapter, and the PCI-e Card Reader with various 2-32GB SDCards.
It's driving me bonkers! Been at this for over a week now, and am no further than where I started. Everything I read on the Internet so far says this is doable, but so far nothing seems to get me to the installer. Funny thing is my first Hackintosh installs went smooth as butter on my step-mom's Latitude (different model) and on a desktop of a friends' (we built it out-of-spec intentionally and it still worked - a Core2 Quad Q9400 and GeForce GTX-750 Ti).
https://redd.it/1e98dii
@r_hackintosh
I cant use my laptop
https://redd.it/1e98zam
@r_hackintosh
Can I run MacOS on my DELL Laptop? Also need help in installing it.
Specs:-
Model: DELL Latitude 5480
CPU: i5 7300U
GPU: Integrated graphics
RAM: 16GB DDR4 @2133MHz
SSD: 240GB SATA 2.5" SSD
Current OS: Windows 10 (Win11 not supported)
I am new to this, so can someone suggest me a guide on how to install MacOS on this laptop?
https://redd.it/1e96ogc
@r_hackintosh
Adding card reader device id to OpenCore
I want to know how to add a card reader or other device to OpenCore using the device-id feature
How do you configure device-id for something that isn't a GPU>
https://redd.it/1e93x7b
@r_hackintosh
Dual boot ventura on dell 9530
Ive only started this journey and im just confused, i followed netvn82's tutorial on yt but my laptop just kept booting into win11. I have an i7 13700H and the code name is raptor lake (idk what that means). ive read around and heard sometimes the gpu matters too i have both integrated graphics and a dedicated gpu which is an nvidia rtx 4060, so do i have any hope? Any and all help would be greatly appreciated thanks you ^_^ <333
https://redd.it/1e90njk
@r_hackintosh
Can you Hackintosh a HP G60-121WM? If so, how? I would like to multi-boot it alongside Windows 11, Vista, and XP.
Specs:
3GB RAM
140GB HDD
AMD Sempron SI-40 (2.0GHz single core Processor)
Nvidia Geforce 8200M G (Graphics card)
No webcam (kinda weird tbh)
3 USB ports
1 SD Card port
1 CD/DVD Drive
2 Modem/Ethernet ports
1 HDMI port
1 VGA port
Factory OS:
Microsoft Windows Vista Home Premium 32-bit/x86
Release date:
Either late 2008 or early 2009
I would like to install Mac OS snow leopard to it. I already have Microsoft Windows 11, Vista, and XP installed to it. I'm just wondering if it's hackintoshable. If it is I might need some details on how to do it. Thanks!
https://redd.it/1e8zv73
@r_hackintosh
Exporting .H265 on 6600 XT Hackintosh vs M1 MacBook Air
Any experts out there able to explain why my 6600 XT Hackintosh, in Davinci Resolve, exports the same timeline – estimated – to take over 6+ hours for a H265 file, yet my M1 air is taking 15 minutes?
Is it because the 6600 XT has no H265 dedicated cores and the M1 does and is setup for H265? I had noticed this for a year or so, but this latest timeline kind of proved something is up with H265 and my 6600 XT Hackintosh. The 6600 XT should shred, no?
https://redd.it/1e8x0oq
@r_hackintosh
No Name in boot screen
I have the correct file layout and a good config but despite of that when I boot the OpenCore usb it only shows "No Name" which boots to my Linux installation
https://redd.it/1e8s7i1
@r_hackintosh
Nvidia + Hackintosh Question
With nvidia drivers becoming open source would it be sensible to expect future compatibility with nvidia gpus and hackintoshes?
https://redd.it/1e8nuks
@r_hackintosh
<key>EnableJumpstart</key>
<true/>
<key>GlobalConnect</key>
<true/>
<key>HideVerbose</key>
<true/>
<key>JumpstartHotPlug</key>
<true/>
<key>MinDate</key>
<integer>0</integer>
<key>MinVersion</key>
<integer>0</integer>
</dict>
<key>ConnectDrivers</key>
<true/>
<key>Drivers</key>
<array>
<string>OpenRuntime.efi</string>
<string>AudioDxe.efi</string>
</array>
<key>Input</key>
<dict>
<key>KeyFiltering</key>
<true/>
<key>KeyForgetThreshold</key>
<integer>5</integer>
<key>KeySupport</key>
<true/>
<key>KeySupportMode</key>
<string>Auto</string>
<key>KeySwap</key>
<false/>
<key>PointerSupport</key>
<true/>
<key>PointerSupportMode</key>
<string>Auto</string>
</dict>
<key>Output</key>
<dict>
<key>ConsoleMode</key>
<string>Max</string>
<key>DirectGopRendering</key>
<true/>
<key>GopBurstMode</key>
<true/>
<key>GopPassThrough</key>
<true/>
<key>IgnoreTextInGraphics</key>
<false/>
<key>ProvideConsoleGop</key>
<true/>
<key>ReconnectOnResChange</key>
<true/>
<key>ReplaceTabWithSpace</key>
<true/>
<key>Resolution</key>
<string>Max</string>
<key>TextRenderer</key>
<string>BuiltinGraphics</string>
<key>UIScale</key>
<integer>2</integer>
</dict>
<key>ProtocolOverrides</key>
<dict>
<key>AppleAudio</key>
<true/>
<key>AppleBootPolicy</key>
<true/>
<key>AppleDebugLog</key>
<true/>
<key>AppleEvent</key>
<true/>
<key>AppleFramebufferInfo</key>
<true/>
<key>AppleImageConversion</key>
<true/>
<key>AppleImg4Verification</key>
<true/>
<key>AppleKeyMap</key>
<true/>
<key>AppleRtcRam</key>
<true/>
<key>AppleSecureBoot</key>
<true/>
<key>AppleSmcIo</key>
<true/>
<key>AppleUserInterfaceTheme</key>
<true/>
<key>DataHub</key>
<true/>
<key>DeviceProperties</key>
<true/>
<key>FirmwareVolume</key>
<true/>
<key>HashServices</key>
<true/>
<key>OSInfo</key>
<true/>
<key>UnicodeCollation</key>
<true/>
</dict>
<key>Quirks</key>
<dict>
<key>ActivateHpetSupport</key>
<false/>
<key>EnableVectorAcceleration</key>
<true/>
<key>ExitBootServicesDelay</key>
<integer>0</integer>
<key>ForceOcWriteFlash</key>
<false/>
<key>ForgeUefiSupport</key>
<false/>
<key>IgnoreInvalidFlexRatio</key>
<true/>
<key>IgnoreTextInGraphics</key>
<false/>
<key>ProvideConsoleGop</key>
<true/>
<key>ProvideCustomSlide</key>
<true/>
<key>ReleaseUsbOwnership</key>
Laptop Freezes when power cord is plugged in or unplugged
hi! i put together a hackintosh a few months ago ith my dell lattitude E7270 got it running big sur fine upgradeed t monterey still fine. a few weeks later i noticed that pressing f12 or unplugging and plugging in the laptop made it completley freeze. i have changed the ram resinstalled mac os formatted the ssd used lower and higher amounts of ram used patches of ssdt XOSI and rebiult my efi from scratch. i dont know where to start. i got it to stop doing it when i click f12 however still when the power is removed or added the laptop freezes. if anyone knows a fix please let me know. ( i also noticed that sleep stopped working when the other problem started)
-Thanks
specs
i-5 6300 cpu 6th gen
16gb ddr4 2133 mhz corsair
512g nvme ssd samsung 970 evo
intel hd 520 graphics
alc code =11 (audio)
https://redd.it/1e9ksty
@r_hackintosh
Hey Guys Please Help Me!!!
When I boot my Mac it shows the loading bar but doesn't boot up until i reset the smc a couple of times, And my Mac freezes and restarts at random times. Please Help Me!!
https://redd.it/1e9jzhi
@r_hackintosh
My Ventura journey with AM5 and SFF
Napoleon and his staff reviewing the mounted chasseurs of the Imperial Guard before the Arc de Triomphe du Carrousel.
Bonjour !
Another success for me : dead-stable MacOS Ventura 13.6.7 / Windows 23H2 Hackintosh using only ProperTree. Indeed, I used in the past the sh*tty OCAT app to edit my plist and EFI but it's not optimal at all. It can make changes without you noticing it and saves them. LEARN TO USE PROPERTREE. I did some Hackintoshes in the past with OCAT but I never achieved to make them fully stable for obvious reasons. As the title states, I love Hackintosh and SFF (Small Form Factor) computers. More explanations below.
The glorious parts
- Ryzen 5 7500F, Asrock B650i Lightning WiFi (Latest BIOS 3.01), AMD Radeon RX 6900 XT reference model, Kingston FURY BEAST 16Gb 4800MHz CL38 DDR5, Crucial P3 Plus 1Tb (Windows), Samsung 970 Evo Plus (250Gb), Scythe Big Shuriken 3, SSUPD Meshlicious & Corsair SF750 80+ Platinum (🐐).
- The original Mediatek Wifi/BT card was swapped for an Intel AX210 because it was crap, unreliable and unsupported under MacOS. For MacOS, I'm using a MQUPIN Fenvi T919 "native" Apple card to have a native support.
- Realtek RTL8125 Ethernet controller.
- Realtek ALC897 Audio controller, Asus XG17AHPE Audio ouput and Apple USB-C to Jack dongle.
Some devices
- iPhone 13 Pro (iOS 18 last Beta), Apple Magic Keyboard, Logitech G305, Akko 3087 Silent, MacBook Air M1 13", Asus XG17AHPE display, Sennheiser HD 450BT, Moondrop CHU II IEM and tons of USB sticks.
# OpenCore 1.0.0
ACPI
- I used a prebuilt SSDT-CPUR and I made the two others using CorpNewt tool : SSDTime.
SSDTs time.
Kexts
- I used the last releases of each kext. Please use OC snapshot of ProperTree to put them in the correct order.
Kexts.
What's working ?
- Pretty much everything. Wifi, Bluetooth, Ethernet, Airdrop, iServices (iCloud, iMessage, etc.), GPU acceleration (OpenCL, Metal 3), Audio (alcid=11 for me), Wake-Up, Sleep ...
- You need to make your own MMIO Whitelist using OpenCore Debug and CorpNewt's MmioDevirt tool. -> DevirtualizeMMIO quirk needs to be enabled.
- SecureBootModel is enabled with the value "j160" (corresponding to my SMBIOS) and SIP too with default value.
- Every USB ports I needed on the motherboard : I used USBToolBox. It creates a custom UTBMap.kext. It needs USBToolBox.kext.
- I'm using the GoldenGateExt custom theme for OpenCore. It looks better than the default GoldenGate theme.
What's not working ?
- Continuity with FaceTime, ApplePay, ...
- Discord crashes when joining voice calls or voice chanels. it can work fine when deleting Krisp in the library folder or patching it with AMDFriend but it's boring 'cause I'll have to do that every Discord updates... Some apps are impacted too. More details on the web. For now, I'm using the Discord web.
# Specific things
The RX 6900 XT itself
- The RX 6900 XT (XTX chip) is natively supported under MacOS. I managed to make it work great in Ventura, Sonoma, Sequoia Beta 1 and Beta 3. It only requires WhateverGreen.kext and agdpmod=pikera in boot-args. You can also use RX 6950 XT and 6900 XT XTXH chip variants but you will have to spoof their ID. By default, the card uses zero RPM mode that is nice under Windows but makes the card hotter in MacOS. So thanks to DeviceProperties, I disabled zero RPM fan mode and also added a less-coilwhine fix.
- For Windows, I undervolted it to gain better thermals and less noise : it turned out great. With 1100mv, 2300MHz max frequency and a pretty quiet fan curve, I manage to get only 60C, 160w power consumption in Ghost of Tsushima (1080P Very high, no FSR and no Frame
Mac OS Linux und Windows
Servus,
Ich möchte mich gerne bissle in Mac einarbeiten:).
Jetzt will ich aber kein Mac book haben ;).
Ich hab einen Lenovo L13 Gen2.
Auf dem ist schon ein Multiboot mit grub worauf nen linux und ein Windows läuft.
Bekomm ich auf den noch nen MacOS z.b. mit einer SD Karte oder sogar auf die Platte mit ner weiteren Partition?
Hat damit vlt schon jemand Erfahrung?
Bin über jede Hilfe dankbar:)
Danke
LG
https://redd.it/1e9dvge
@r_hackintosh
2 Nested Kernel Panics
CPU : Intel Core i5-12400 2.5 GHz 6-Core Processor
Motherboard : Gigabyte H610M K DDR4 Micro ATX LGA1700 Motherboard
Memory : Kingston FURY Beast 16 GB (1 x 16 GB) DDR4-3200 CL16 Memory
Storage : Samsung 980 500 GB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
Video Card : PowerColor Fighter Radeon RX 6600 8 GB Video Card
Case : Deepcool MATREXX 40 3FS MicroATX Mini Tower Case
Power Supply : Gigabyte UD850GM 850 W 80+ Gold Certified Fully Modular ATX Power Supply
Monitor : Dell S2721HGF 27.0" 1920 x 1080 144 Hz Curved Monitor
config.plist: https://pastebin.com/2Dj5Nm3r
https://preview.redd.it/o9rvib2nc2ed1.png?width=3060&format=png&auto=webp&s=e4677d451997e2fc2b951f766ca332f16ea4f9e0
https://preview.redd.it/5031sjkkc2ed1.png?width=3060&format=png&auto=webp&s=d168928f90d5987f5eca2666eb8a530e0a843a36
https://redd.it/1e9czpm
@r_hackintosh
HELP wifi
opencore boted correctly to the recovery screen but it said no internet i tried ethernet but it didnt work
https://redd.it/1e99o18
@r_hackintosh
Apple logo and progress bar flashes than screen goes black with only a cursor
The cursor works though
https://redd.it/1e985oj
@r_hackintosh
I need help installing macOS Sonoma
I have the following hardware:
CPU : AMD Ryzen 5 3600 3.6 GHz 6-Core Processor
CPU Cooler : Vetroo V5 52 CFM CPU Cooler
Motherboard : Asus ROG STRIX B550-F GAMING ATX AM4 Motherboard
Memory : Corsair Vengeance LPX 16 GB (2 x 8 GB) DDR4-3200 CL16 Memory x2
Storage : Samsung 980 1 TB M.2-2280 PCIe 3.0 X4 NVME Solid State Drive
Video Card : PowerColor Red Devil Radeon RX 5700 XT 8 GB Video Card
Power Supply : Corsair RM850x (2021) 850 W 80+ Gold Certified Fully Modular ATX Power Supply
Monitor : Pixio PX278 27.0" 2560 x 1440 144 Hz Monitor.
My efi folder.
Latest OC debug log.
I am stuck at the kernel error: [EB|#LOG:EXITBS:START\].
Any help would be appreciated,
thank you!
https://redd.it/1e95cvi
@r_hackintosh
Acpi
As the first time guy who is making it, I’m trying so hard to make the Acpi section for my amd ryzen 3 3200g but im lost what can I do? Im using dortinia opencore btw but id think its clear enough in this section
https://redd.it/1e90neu
@r_hackintosh
Mini icon on the dock on Sonoma
I upgraded from Ventura to Sonoma and some apps when are opened, they have the normal icon on the dock and other icon appears between the download folder and trashcan on the dock. Never see this. If I click on this icon a white little window appears. I'm using two monitors here. And the app is running fine. Anyone have any idea about this?
https://redd.it/1e915d6
@r_hackintosh
Dual success! Sonoma on PRO Z690-A WIFI with i9-13900k and a RX 6700xt, and on a Dell Precision 5540 laptop. Details in comments.
https://redd.it/1e8xgql
@r_hackintosh
Help with dual boot ventura on dell xps 9530
Ive only started this journey and im just confused, i followed netvn82's tutorial on yt but my laptop just kept booting into win11. I have an i7 13700H and the code name is raptor lake (idk what that means). ive read around and heard some times the gpu matters too, i have both integrated graphics and a dedicated gpu which is an nvidia rtx 4060. any and all help would be greatly appreciated thanks you \^_\^ <333
https://redd.it/1e8tgre
@r_hackintosh
worst luck somone could have.
can you believe ive got the worst luck out here okay listen me out i wanted to install hackintosh and guess what i've got intel i5 11gen that i came to know doesn't work then we come to graphic card i've got nvidia 2050 again doesnt work and than we come to processor code name and guess what again i've got tigerlake that doesnt work either OML what the heckkk is my luck.
https://redd.it/1e8q8m7
@r_hackintosh
<true/>
<key>RequestBootVarRouting</key>
<true/>
<key>TscSyncTimeout</key>
<integer>0</integer>
<key>UnblockFsConnect</key>
<true/>
</dict>
</dict>
</dict>
</plist>
# Steps to Finalize the Config
1. **Generate SMBIOS:** Use tools like [GenSMBIOS](https://github.com/corpnewt/GenSMBIOS) to generate unique values for `SystemProductName`, `SystemSerialNumber`, `MLB`, and `SystemUUID`.
2. **USB Mapping:** Use a tool like [USBMap](https://github.com/corpnewt/USBMap) to create a custom USB map for your system.
3. **Verify Drivers:** Ensure all the necessary drivers (e.g., `OpenRuntime.efi`, `AudioDxe.efi`) are present in the `EFI/OC/Drivers` directory.
4. **Install Kexts:** Place the required kexts (`Lilu.kext`, `WhateverGreen.kext`, `VirtualSMC.kext`, `AppleALC.kext`, `IntelMausi.kext`, `NVMeFix.kext`) in the `EFI/OC/Kexts` directory.
5. **Check Config:** Use [OCConfigCompare](https://github.com/corpnewt/OCConfigCompare) to verify your `config.plist` against the sample provided above.
* This should get you a working Hackintosh with macOS Sonoma. If you encounter issues, adjustments might be needed based on your specific hardware setup.
* Steps to Finalize the Config
* Generate SMBIOS: Use tools like GenSMBIOS to generate unique values for SystemProductName, SystemSerialNumber, MLB, and SystemUUID.
* USB Mapping: Use a tool like USBMap to create a custom USB map for your system.
* Verify Drivers: Ensure all the necessary drivers (e.g., OpenRuntime.efi, AudioDxe.efi) are present in the EFI/OC/Drivers directory.
* Install Kexts: Place the required kexts (Lilu.kext, WhateverGreen.kext, VirtualSMC.kext, AppleALC.kext, IntelMausi.kext, NVMeFix.kext) in the EFI/OC/Kexts directory.
* Check Config: Use OCConfigCompare to verify your config.plist against the sample provided above. This should get you a working Hackintosh with macOS Sonoma. If you encounter issues, adjustments might be needed based on your specific hardware setup.
**End of ChatGPT output**
# OCValidate Errors
* AudioDxe.efi at UEFI->Drivers\[1\] must have LoadEarly set to FALSE!
* OpenRuntime.efi at UEFI->Drivers\[0\] should have its LoadEarly set to FALSE unless OpenVariableRuntimeDxe.efi is in use!
* UEFI->Input->PointerSupport is enabled, but PointerSupportMode is not ASUS!
* UEFI->Output->ReplaceTabWithSpace is enabled on non-System TextRenderer (currently BuiltinGraphics)!
CheckUefi returns 4 errors! Completed validating /Desktop/EFI/OC/config.plist in 0 ms. Found 4 issues requiring attention.
https://redd.it/1e8mpxo
@r_hackintosh
<key>Entries</key>
<array/>
<key>Security</key>
<dict>
<key>AllowNvramReset</key>
<true/>
<key>AllowSetDefault</key>
<true/>
<key>ApECID</key>
<integer>0</integer>
<key>AuthRestart</key>
<true/>
<key>BlacklistAppleUpdate</key>
<true/>
<key>BootProtect</key>
<string>None</string>
<key>DmgLoading</key>
<string>Signed</string>
<key>ExposeSensitiveData</key>
<integer>6</integer>
<key>Vault</key>
<string>Optional</string>
</dict>
<key>Tools</key>
<array/>
</dict>
<key>NVRAM</key>
<dict>
<key>Add</key>
<dict>
<key>4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14</key>
<dict>
<key>csr-active-config</key>
<data>AQAAAA==</data>
<key>nvda_drv</key>
<string>1</string>
<key>prev-lang:kbd</key>
<string>en:0</string>
<key>boot-args</key>
<string>-v keepsyms=1 debug=0x100 alcid=1</string>
</dict>
</dict>
<key>Delete</key>
<dict>
<key>4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14</key>
<array>
<string>csr-active-config</string>
<string>nvda_drv</string>
<string>prev-lang:kbd</string>
<string>boot-args</string>
</array>
</dict>
<key>LegacySchema</key>
<dict/>
</dict>
<key>PlatformInfo</key>
<dict>
<key>Automatic</key>
<true/>
<key>CustomMemory</key>
<false/>
<key>UpdateDataHub</key>
<true/>
<key>UpdateNVRAM</key>
<true/>
<key>UpdateSMBIOS</key>
<true/>
<key>UpdateSMBIOSMode</key>
<string>Create</string>
<key>Generic</key>
<dict>
<key>AdviseWindows</key>
<true/>
<key>MLB</key>
<string>XXXXXXXXXXXXXXX</string>
<key>MaxBIOSVersion</key>
<false/>
<key>SystemMemoryStatus</key>
<string>Auto</string>
<key>SystemProductName</key>
<string>iMac20,1</string>
<key>SystemSerialNumber</key>
<string>XXXXXXXXXXXX</string>
<key>SystemUUID</key>
<string>XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX</string>
</dict>
<key>DataHub</key>
<dict>
<key>ARTFrequency</key>
<integer>0</integer>
<key>BoardProduct</key>
<string>Mac-XXXXXXXXXXXXXXX</string>
<key>BoardRevision</key>
<data></data>
<key>DevicePath</key>
<data></data>
<key>FSBFrequency</key>
<integer>0</integer>
<key>InitialTSC</key>
<integer>0</integer>
<key>PlatformName</key>
<string>iMac20,1</string>
<key>SmcBranch</key>
<data></data>
<key>SmcPlatform</key>
<data></data>
<key>StartupPowerEvents</key>
<integer>0</integer>
<key>SystemSerialNumber</key>
<string>XXXXXXXXXXXX</string>
<key>SystemUUID</key>
<string>XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX</string>
</dict>
</dict>
<key>UEFI</key>
<dict>
<key>APFS</key>
<dict>
