error 3 table load failures 21 successful
https://preview.redd.it/avqzrozjxhcd1.png?width=1200&format=png&auto=webp&s=d5d53bb55db31890b293174796a04e69f78ca99b
help I built an EFI for the lenovo legion 7
I have tried booting with different macOS and I get the same error
espec:
proccesor: ryzen 9 5900hx
grafic : RTX3080
ram:32GB
https://redd.it/1e33w7p
@r_hackintosh
OpenCore 0.9.6 dell t5810 rx470 black screen after verbose boot
I have dell t5810 with 64GB ram, e5-2667v4 bios A33 and rx 470 4g (this one -> https://www.techpowerup.com/gpu-specs/sapphire-rx-470-platinum-edition.b3735) I created usb boot with this this exact efi folder. Renamed config-DummySerial.plist to config.plist and made sure cpu model is For V4 Xeon's: D4060300 00000000 00000000 00000000. Then generated smbios and uuid with GenSMBIOS. After booting and after verbose boot the screen just goes black, there is signal to the monitor but its black and after about 5-10mins pc goes to sleep. Tried with Big Sur, Monterey, Ventura, Sonoma. I have tried attaching agdpmod=pikera and generating smBios with both MacPro7,1 and iMacPro1,1. Everything works fine in Linux Debian 12.
this is my flash drive file structure
├───com.apple.recovery.boot
│ BaseSystem.chunklist
│ BaseSystem.dmg
│
└───EFI
├───BOOT
│ BOOTx64.efi
│
└───OC
│ OpenCore.efi
│ config.plist
│
├───ACPI
│ SSDT-EC.aml
│ SSDT-HPET.aml
│ SSDT-PLUG.aml
│ SSDT-RTC0-RANGE.aml
│ SSDT-SBUS-MCHC.aml
│ SSDT-UNC.aml
│ SSDT-X99-USBX.aml
│
├───Drivers
│ AudioDxe.efi
│ BiosVideo.efi
│ CrScreenshotDxe.efi
│ HfsPlus.efi
│ HfsPlusLegacy.efi
│ HiiDatabase.efi
│ NvmExpressDxe.efi
│ OpenCanopy.efi
│ OpenHfsPlus.efi
│ OpenLinuxBoot.efi
│ OpenPartitionDxe.efi
│ OpenRuntime.efi
│ OpenUsbKbDxe.efi
│ Ps2KeyboardDxe.efi
│ Ps2MouseDxe.efi
│ ResetNvramEntry.efi
│ ResetTSCAdjust.efi
│ UsbMouseDxe.efi
│ XhciDxe.efi
│
├───Kexts
│ ├───AppleALC.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ AppleALC
│ │
│ ├───HibernationFixup.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ HibernationFixup
│ │
│ ├───IntelMausi.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ IntelMausi
│ │
│ ├───Lilu.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ Lilu
│ │
│ ├───NVMeFix.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ NVMeFix
│ │
│ ├───SMCProcessor.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ SMCProcessor
│ │
│ ├───USBMap_T5810.kext
│ │ └───Contents
│ │ Info.plist
│ │
│ ├───VirtualSMC.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ VirtualSMC
│ │
│ ├───VoodooTSCSync.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ VoodooTSCSync
│ │
│ ├───WhateverGreen.kext
│ │ └───Contents
│ │ │ Info.plist
│ │ │
│ │ └───MacOS
│ │ WhateverGreen
│ │
│ └───X99_InjectorUSB3.kext
│ └───Contents
│ Info.plist
│
├───Resources
│ ├───Audio
│ │ OCEFIAudio_VoiceOver_Boot.wav
│ │
│ ├───Font
│ │ Font_1x.bin
│ │ Font_1x.png
│ │ Font_2x.bin
│ │ Font_2x.png
│ │
│ ├───Image
│ │ └───Acidanthera
│ │ ├───Chardonnay
│ │ │ AppleRecv.icns
│ │ │ AppleTM.icns
│ │ │ BtnFocus.icns
│ │ │ Cursor.icns
│ │ │ Dot.icns
│ │ │ Enter.icns
│ │ │ ExtAppleRecv.icns
│ │ │ ExtAppleTM.icns
│ │ │ ExtHardDrive.icns
│ │ │ HardDrive.icns
│ │ │ Left.icns
│ │ │
Will my PC support Hackintosh?
I am wanting to dualboot Big Sur and Windows but I don't know if my PC supports hackintosh.
Specs:
CPU - Intel Core i5 10400F Comet Lake
GPU - ASUS RTX 3050 8GB Dual Fan
RAM - 32GB
https://redd.it/1e30gkk
@r_hackintosh
Can software tell if I'm running macOS on a hackintosh or a regular Apple product?
Hey there. So, thing is - I have a new client that requires an Apple device and Apple VPN to run its cloud software (in which I'd be working). But I reaaally don't want to buy an overpriced Apple product if I can avoid it. Will they be able to detect a hackintosh or is the fact that I'd be running macOS enough? Does anyone have any experience with this? Thanks.
https://redd.it/1e2xidu
@r_hackintosh
Stuck with "AppleKeyStore: operation failed" and "Too many corpses being created" after reboot during macOS install
Hi everyone,
I'm encountering a problem during the macOS installation on my laptop. After the initial phase of the installation and a required reboot, I get stuck with the following error messages:
AppleKeyStore: 12195:77: operation falled (sel: 7 ret: e00002c2,-1)
process crashed: opendirectoryd. Too many corpses being created
The initial boot from the bootable USB went fine, and the first part of the installation completed without any issues. However, after the reboot, I'm stuck with these error messages and cannot proceed further. l'm not sure how to resolve these errors.
Has anyone experienced similar issues or have any suggestions on how to fix this?
Any advice or guidance would be greatly appreciated!
https://redd.it/1e2xow7
@r_hackintosh
Wifi not working
Hi! i have gotten the installer in mac os working fine but im facing an issue, theres no wifi, i tried ethernet as well and theres just no internet at all so i cant install mac yet, in kexts im using RealtekRTL8111 And also LucyRTL8125Ethernet and for wifi and bluetooth im usng AirportititLWM and IntelBluetoothFirmware, does anyone know why im getting no internet and also no bluetooth, here is my wifi and ethernet card, are these cards supported and if so what kext do i need to use to make this work?
Ethernet: Realtek PCIe Fe Family Controller
Wifi: Realtek RTL8723BE 802.11 bgn Wi-Fi Adapter
im running mac os catalina 10.15.3
https://redd.it/1e2vfg9
@r_hackintosh
Hackintosh on Snapdragon X Elite??
Now that we have X Elite ARM CPUs, will it be possible to run hackintosh on laptops powered by X Elite?
https://redd.it/1e2umsb
@r_hackintosh
Migration Assistant - Monterey to Sonoma - Breaking OS partition
Hi all,
I recently attempted to run migration assistant to copy all my data from another hackintosh running Monterey to another system I have which was running a fresh install of Sonoma.
All was going well and migration assistant copied over the files. However upon restarting and trying to boot back into the Sonoma system. It tries to boot then jumps into the recovery partition instead.
Tried multiple restarts and also reset NVRAM and still the same outcome.
While I know migration assistant may not be an ideal way to transfer it over I'm unsure what the problem could be?
Has anyone came across this issue and if so what is the best route to boot back into the system?
As far as I'm aware, migration assistant doesn't touch the EFI partition at all so I'm unsure why it would now affect the booting of the OS partition. Given the recovery partition is booting fine, I'd assume it wasn't EFI related.
Thanks in advance!
https://redd.it/1e2q4nn
@r_hackintosh
No low power mode option
What is required to enable low power mode? Is it even possible on hackintosh? Thanks for answers
Ive attached some screenshots of how my settings look, i thought there was always a low power mode option there but ig my computer doesnt have it. Laptop: Dell Latitude 7490 8th i5, 16GB 2400, UHD 620
https://preview.redd.it/du0xunn0adcd1.png?width=697&format=png&auto=webp&s=29439fd9857a02b0631f5080e73ebe040957749e
https://preview.redd.it/8c9mjnn0adcd1.png?width=346&format=png&auto=webp&s=841688274115b636d989a5eae26c149408922c84
https://preview.redd.it/zoq8zmn0adcd1.png?width=827&format=png&auto=webp&s=990f09b77f2a09844a1f39ee1b469bc8f11244eb
https://preview.redd.it/jt8jkvo0adcd1.png?width=827&format=png&auto=webp&s=6e8afc02b3586f54d6621a674706232165d61d05
https://redd.it/1e2nel4
@r_hackintosh
Anyone know what this panic means?
The panic seems to be related to AppleSMC
Asrock z68 Extreme4
Intel Xeon e3 1230v2
GTX 650
Ddr3 16gb ram
https://preview.redd.it/nfvb0omg9bcd1.png?width=1792&format=png&auto=webp&s=939ff49d3454b2a86cad5dbb37eb03031f39088d
https://redd.it/1e2e2ob
@r_hackintosh
Mute button grayed out
My mute button is not working and i just cant figure it out. Does anyone know why is it grayed out? Im using appleALC kext with layout id 17
Laptop: Dell Latitude 7490
https://preview.redd.it/0o6wyr1k3ccd1.png?width=727&format=png&auto=webp&s=9bd440ef3750798a77729b524df5fd51ea7eefb9
https://preview.redd.it/74zssyck3ccd1.png?width=369&format=png&auto=webp&s=6c1d87ea769b509e5e952c9279329ef4160831dd
https://redd.it/1e2i2m2
@r_hackintosh
Stuck with "AppleKeyStore: operation failed" and "Too many corpses being created" after reboot during macOS install
Hi everyone,
I'm encountering a problem during the macOS installation on my HP G8 245 laptop. After the initial phase of the installation and a required reboot, I get stuck with the following error messages:
AppleKeyStore: 12195:77: operation failed (sel: 7 ret: e00002c2,-1)
process crashed: opendirectoryd. Too many corpses being created
The initial boot from the bootable USB went fine, and the first part of the installation completed without any issues. However, after the reboot, I'm stuck with these error messages and cannot proceed further.
I've tried using verbose mode to get more information, but I'm not sure how to resolve these errors. Has anyone experienced similar issues or have any suggestions on how to fix this?
Any advice or guidance would be greatly appreciated!
https://redd.it/1e2ee55
@r_hackintosh
Sequoia Beta 3 : I need to do improvements
Hello !
I succeed in installing MacOS Sequoia Beta 3 (thanks to OpenCore 1.0.0) on my Hackintosh but I need to do improvements ! Any suggestions will be appreciated 😃 ! This EFI worked under Ventura 13.6.7 & Sonoma 14.5.
https://preview.redd.it/1ovyu5xbnacd1.png?width=1920&format=png&auto=webp&s=191ef1d25ae1205f700d7e03b8ea8aabf17b11e6
🌵Specs
Ryzen 5 7500F
Asrock B650i Lightning WiFi (BIOS 3.01)
AMD Radeon RX 6900 XT (Reference model)
Kingston FURY BEAST 16Gb 4800MHz CL38 DDR5
Crucial P3 Plus 1Tb (Windows 11 23H2) & Samsung 970 Evo Plus 250Gb (Sequoia 15.0 B3)
Realtek RTL8125
Realtek ALC897
Swapped the original crappy incompatible Mediatek wifi card to an Intel AX210.
✅What's working ?
Wifi ([Heliport.app](https://github.com/OpenIntelWireless/HeliPort/releases/tag/v1.4.1) & itlwm.kext),
Ethernet (LucyRTL8125Ethernet),
GPU acceleration of course,
iMessage, iCloud, etc.
❌What's not...
Onboard Audio (ALC897) not working,
Bluetooth not working,
Airdrop, Continuity, etc.,
Dual-boot for some unknown reasons : Windows appears in the OC bootpicker but instantly I get a black/grey screen...
Few bugs (remember it's a beta !).
🖥️Kexts used
Lilu 1.6.7
WhateverGreen 1.6.6
AppleALC 1.9.1 (not working) : not working under Sequoia
AppleMCEReporterDisabler 1.2
Innie 1.3.1
itlwm 2.3.0
LucyRTL8125Ethernet 1.1.0
NVMeFix 1.1.1
RadeonSensor 0.3.3
RestrictEvents 1.1.3
SMCAMDProcessor 1
SMCRadeonGPU 0.3.3
USBToolBox 1.1.1
USBWakeFixup 1
UTBMap 1.1 (do your own mapping)
VirtualSMC 1.3.2
I removed Bluetooth related kexts.
Please use ProperTree for correct Kexts order.
Planned improvements
Storage : 970 Evo Plus to P3 Plus 1Tb & P3 Plus 1Tb to Western Digital SN850,
CPU : 7500F to Ryzen 7 7800X3D,
Wifi/BT : I ordered a MQUPIN Fenvi T919 and want to patch it with OCLP 1.6 (Nightly).
Feel free to ask me any questions (I'm not the best to answer them). "Can you share your EFI ?" : depends on my humour 😂
[Sequoia f\ck yeah](https://preview.redd.it/30f5lf37nacd1.png?width=1920&format=png&auto=webp&s=ab4179778aaf52921e3600d33257e2a73ea7a9a6)
https://redd.it/1e2baja
@r_hackintosh
Guide How To Install macOS on top of an existing Windows install on the same drive
Hey, I just wanted to share the steps I took to install macOS on my Laptop, which already has both Windows and Ubuntu installed.
Since it's a Laptop, I only have one drive available, and I believe many are in the same situation where they want to dual boot, but not completely reinstall Windows or other operating systems.
Before you begin, make sure that important data is backed up. I am not a computer expert, just a happy man who messed with his partitions and didn't break it.
It's definitely cleaner to start with macOS installing macOS on an empty drive, but I figured why not give it a try before wiping it anyway?
The main issue with installing macOS on top of an existing installation is the EFI partition, which is where the bootloaders are saved. Windows has one too, but the problem is that it's size is only 100 MB, instead of the 200 MB that macOS absolutely requires.
Here are all the steps I did to successfully change the EFI's size:
1. Create a bootable USB drive with GParted installed. This tool enables you to mess with your partitions. It's installed on a USB drive so that none of the partitions are active when you're editing them.
2. In GParted, shrink your large Windows partition to your new desired size. To do that, right click your large partition and select Resize/Move. I gave it 512000 MiB (500GiB) + 100 MiB (so 512100 in total) on my 1TB drive.
3. Apply changes and wait (Green checkmark in your top row).
4. Resize the Windows partition again. This time, you'll want to set Free Space Preceding to 100 MiB. Your new total size should now be 512000 MiB. GParted will give you a warning that this can break things, and it's absolutely right about that. Apply changes. This operation will take a long time.
5. Move the Microsoft Reserved Partition (MSR). It should be in between the 100MiB EFI partition and your large main partition. You'll want to keep it the same size (I believe it's 16 MiB), so set the Free space preceding to 100MiB, make sure it's the same size, and apply changes.
6. Now we can finally resize the EFI partition to the desired 200 MB. Select Move/Resize one last time, and set the size to 200 MiB. If you can't do so yet, make sure you applied the changes.
7. Create a HFS+ partition in the large unallocated space behind your main Windows partition. If you leave it unallocated, disk utility won't be able to erase it when installing macOS.
8. That should be all! Reboot to test if it works, and if it does, you can proceed to installation!
9. (Optional) You can already modify your EFI in Windows to install OpenCore. Open Terminal as adminsistrator, typediskpartlist disk (Look for the number of your main boot drive)select disk 0list partition (Look for the number of your 200MB EFI partition)select partition 1assign letter=a
Now you need Explorer++ in Administator mode to copy over your OC and BOOT folders to the EFI.
Make sure to keep the exisiting files there. I already had a BOOTx64.efi file in my BOOT folder and overwrote it.
10) When installing macOS, open Disk Utility in Recovery, make sure to select "Show All Devices" in the navigation bar and erase your untitled HFS+ Partition as APFS. Now you can follow the normal Dortania Guide.
https://redd.it/1e26xy7
@r_hackintosh
Can i get MacOS Sonoma on my Old Thinkpad?
System Specs:
GPU: Intel UHD 620
CPU: Intel Core i5-8265U
Disk: (x1) 1TB NVME Hard Drive + another 256gb nvme hard drive (i plan on using the 256gb for mac)
RAM: 32GB DDR4
Wifi Chip: Intel(R) Wireless 9260NGW (i think this isn't supported, i'll probably switch to an AX210 or smth)
I did perform a bit of research and from what i've learnt, i believe most of my specifications are compatible.
But, I've got a slight concern relating to performance. I'm aware that the i5-8265U & UHD 620 aren't very powerful. They don't perform very well on windows, as compared to my other laptop (i7 13th gen, iris xe). Will the performance issues be worse on mac?
https://redd.it/1e27b19
@r_hackintosh
Lock.icns
│ │ │ Password.icns
│ │ │ Restart.icns
│ │ │ Right.icns
│ │ │ Selected.icns
│ │ │ Selector.icns
│ │ │ SetDefault.icns
│ │ │ Shell.icns
│ │ │ ShutDown.icns
│ │ │ Tool.icns
│ │ │ Windows.icns
│ │ │
│ │ ├───GoldenGate
│ │ │ AppleRecv.icns
│ │ │ AppleTM.icns
│ │ │ BtnFocus.icns
│ │ │ Cursor.icns
│ │ │ Dot.icns
│ │ │ Enter.icns
│ │ │ ExtAppleRecv.icns
│ │ │ ExtAppleTM.icns
│ │ │ ExtHardDrive.icns
│ │ │ HardDrive.icns
│ │ │ Left.icns
│ │ │ Lock.icns
│ │ │ Password.icns
│ │ │ Restart.icns
│ │ │ Right.icns
│ │ │ Selected.icns
│ │ │ Selector.icns
│ │ │ SetDefault.icns
│ │ │ Shell.icns
│ │ │ ShutDown.icns
│ │ │ Tool.icns
│ │ │ Windows.icns
│ │ │
│ │ └───Syrah
│ │ AppleRecv.icns
│ │ AppleTM.icns
│ │ BtnFocus.icns
│ │ Cursor.icns
│ │ Dot.icns
│ │ Enter.icns
│ │ ExtAppleRecv.icns
│ │ ExtAppleTM.icns
│ │ ExtHardDrive.icns
│ │ HardDrive.icns
│ │ Left.icns
│ │ Lock.icns
│ │ Password.icns
│ │ Restart.icns
│ │ Right.icns
│ │ Selected.icns
│ │ Selector.icns
│ │ SetDefault.icns
│ │ Shell.icns
│ │ ShutDown.icns
│ │ Tool.icns
│ │ Windows.icns
│ │
│ └───Label
│ Apple.l2x
│ Apple.lbl
│ AppleRecv.l2x
│ AppleRecv.lbl
│ AppleTM.l2x
│ AppleTM.lbl
│ EFIBoot.l2x
│ EFIBoot.lbl
│ Other.l2x
│ Other.lbl
│ ResetNVRAM.l2x
│ ResetNVRAM.lbl
│ Shell.l2x
│ Shell.lbl
│ SIPDisabled.l2x
│ SIPDisabled.lbl
│ SIPEnabled.l2x
│ SIPEnabled.lbl
│ Tool.l2x
│ Tool.lbl
│ Windows.l2x
│ Windows.lbl
│
└───Tools
acpidump.efi
CleanNvram.efi
OpenShell.efi
ResetTSCAdjust.efi
VerifyMP.efi
https://redd.it/1e3353e
@r_hackintosh
Hackintosh taking too long to boot
I’m new to this world of hackintosh but I get to install Ventura on my Laptop, a XMG MAG 15.
Everything was cool, but I inserted some kexts with the OpenCore OCAuxiliaryTools and rebooted. Since then the system takes a long time to boot on the Apple logo loading.
I tried removing some kexts and putting some new ones, but nothing changes and I get the feeling that those changes are not taking effect. What can I be doing wrong?
EDIT: Before, when I selected “mount ESP” the OCAT showed 2 drivers with EFI and I was doing changes on those 2. But now it only shows one and I’m feeling like it’s the wrong one cause nothing changes.
https://redd.it/1e33kmf
@r_hackintosh
Low power mode
Hi, is it possible to get Low Power mode function on hackintosh? Opencore 1.0.0
it just doesnt show up and when i try to enable it via terminal it says its not available. Thanks!
https://preview.redd.it/f6pdslj2ahcd1.png?width=768&format=png&auto=webp&s=e907c7bdb43992712cddb8bc87ab106e9d47ce03
https://preview.redd.it/f3af35z3ahcd1.png?width=827&format=png&auto=webp&s=d82bf4e92eb894603eee82d137fc686b5bef5546
https://preview.redd.it/83g74fq7ahcd1.png?width=697&format=png&auto=webp&s=c47e5a8002b8631c7759ae1a86d2dea304e95c4a
https://redd.it/1e31524
@r_hackintosh
List of Laptops 100% compatible
Hi all, i searching for buy a laptop 100% compatible a i7 Intel 10th generation, i want It for djing (with stems) can somebody recomend me some models thats hackintosh works perfect? Thanks a lot!
https://redd.it/1e2z73v
@r_hackintosh
error when booting opencore mountain lion assert opencore imageloader.c(986): ((Boolean)(0==1))
i was trying to boot mountain lion and this error message pops up after waiting about 30-60 seconds, ive seen other threads about this only happening on mountain lion, but ive found no results
im using debug version of opencore and followed the dortania guide
specs:
intel core i5 4750
8gb ram
intel 4600 graphics
https://preview.redd.it/yltospjs3gcd1.jpg?width=4000&format=pjpg&auto=webp&s=50c293f5ce84a0a74ac4b076f5cebda29583a48c
https://redd.it/1e2xcrr
@r_hackintosh
Thinkpad X1 Carbon Gen 7 (i7 8665U) shuts off when trying to boot in to opencore
I am trying to understand why the laptop shuts off automatically when selecting macos installer in the boot menu. I looked into the log file generated (attached here) but dont see any error. Any help is appreciated.
Thanks
LOG file link :- https://drive.google.com/file/d/1a1Txx8bBcaRj611M3rEfIrhJElczluoK/view?usp=sharing
https://redd.it/1e2v0pg
@r_hackintosh
Changing Mac type.
Hi all, I set up my EFI to boot my PC as an iMac Pro. It's all set up, and I can't be bothered to reinstall it, but I want to change it from an iMac Pro to a Mac Pro. Can I just change the mac version in the EFI or will it break the os?
I'm running Sonoma with the below hardware.
CPU: i5-7400
GPU: MSI GTX 1050 2gb
RAM: 8gb OEM 2400mhz
Motherboard/Laptop Make and Model: ASUS ROG Strix b250f
Audio Codec: - Not Working/ Havent tinkered with yet.
Ethernet Card: Motherboard I219V
Wifi/BT Card: Fenvi T919.
https://redd.it/1e2rprb
@r_hackintosh
How many reboots typical with Sonoma install?
So I finally have a stable setup, open core 1.0.0
Asus z790 Proart
14700k
6950 XT
G skill Trident Z5 2x32 ddr5 6400
Sn850x nvme
I am putting together a ludicrously detailed guide, and the thing that is most puzzling is the number of reboots that occur before Sonoma finally loads after install.
As I am putting together the guide I am at a loss for how to explain to people the expectation regarding reboots, as the number of reboots I am seeing seems to be greater than per dortania guide.
Here is what I noticed after installing several times:
- first boot to USB to start install seems to reboot once before getting to the Sonoma install screen where it shows 2.5 hours remaining
- then back to open core and choose install MacOS, then apple logo and showing 25 minutes remaining
- another reboot and now in open core I see Sonoma, and choose Sonoma - at this point a reboot almost immediately after verbose output
- again choose Sonoma in open core, and a few more reboots (3 ?) this time lengthy verbose each time
- finally to the Sonoma setup, choosing Timezone, etc, and complete install
At this point Sonoma will boot fine from open core.
This is somewhat reproducible, so in my guide I can't figure out what to say other than "don't worry, just go back to opencore after each reboot and all will be ok"
Do others have this experience? Is this quantity of reboots actually normal?
Thanks
By the way I made installer in windows for what it is worth, and have windows 11 already installed. Windows I boot from BIOS. I also have Sonoma on another nvme. So in making my guide I am installing Sonoma a second time, separately to yet another NVMe. That said, when I installed to first nvme install had same behavior. Behavior also same when I removed other NVMe drives.
https://redd.it/1e2okab
@r_hackintosh
Is the RX 580 compatible? (I mean the original, not the RX 580 2048SP)
I'm new to the hackintosh community, I have a 4th gen i5 and an RX 580 4gb.
https://preview.redd.it/ysn2r6mzyccd1.jpg?width=500&format=pjpg&auto=webp&s=a2479a437680105bf216a0d9dd084eeb427805cb
https://redd.it/1e2m0bc
@r_hackintosh
MacOS Sonoma 14.5 (Ryzentosh)
https://redd.it/1e2itje
@r_hackintosh
It Says Failed to find any applicable disks
Hey Guys I was Trying to Install MacOs Sonoma on to my MacBook Air "13"(7'2) But It says Missing Disks? Ensure they're FAT32 or formatted as GUID/GPT
https://preview.redd.it/a1f9dx3ztbcd1.png?width=492&format=png&auto=webp&s=165fb4562197c8a7583f98a1577dd0cde18875b3
https://redd.it/1e2gtqd
@r_hackintosh
Thinkpad T480s great for hacking is or no?
Recently I wanted to upgrade to a better machine.Wanted some goodies to run hackintosh (and use it as a daily drive).Does T480s support Sonoma (or even Sequoia?)
https://redd.it/1e2bewq
@r_hackintosh
Is vm bridge working on sonoma ?
I use airportitlwm before and after upgrading to sonoma I can't use any vm bridge. When I use vmware or virtualbox it just couldn't get ip address and making it static also not work.
I already found some issue on their github and the status is closed without any clear explanation, can someone test it or is it fixed yet?
https://redd.it/1e27ak3
@r_hackintosh
MacOS installation stuck at "Less Than One Minute Remaining"
Hi everyone,
I'm trying to set up a Hackintosh on a laptop (HP G8 245) that was given to me. Everything seemed to be going smoothly, but during the second part of the installation (the screen with the Apple logo and progress bar), it gets stuck at about 1/3 of the progress bar with the message "less than one minute remaining...".
The initial boot from the bootable USB for the first phase of the installation went well, and I haven't encountered any other problems or noticed anything unusual so far.
Here are some details of my setup:
* **Laptop model**: HP G8 245
* **SSD**: Samsung M2
* **Bootloader**: OpenCore
I haven't been able to figure out what's causing this issue. Has anyone experienced a similar problem or have any suggestions on how to proceed?
Any advice or guidance would be greatly appreciated!
https://redd.it/1e2677k
@r_hackintosh
