Is that possible to make work geolocation in system apps, without wifi?
Hey everyone one. I want to use services like weather, maps, siri, etc on hackintosh, but I don’t want to buy a wifi card. Can I spoof geolocation or do smt? Im having a working bluetooth and don’t need a wifi, because I’m using hackintosh at home.
OS: Sonoma
https://redd.it/18cznt7
@r_hackintosh
Ventura Update
So, recently i converted my old but not so old Acer Laptop into a Hackintosh. I started with the Big Sur installation and it works fine except the Trackpad and The wifi which i tried to fix but couldn't... However there's already the Ventura update available too!
So my question is should/can i update it to Ventura with system update ?
https://redd.it/18cwlp0
@r_hackintosh
FL Studio Crashing on AMD Hackintosh
So If I'm running FL Studio, the whole OS is like crashed/stuck. I had to force shutdown and dual-boot into Windows and deleting the app so it can run again when I force shutdown. Any solution or what may causing this problem?
Specs :
Processor : AMD Ryzen 5600H
iGPU : AMD Radeon Vega 7
VRAM : 2 GB
RAM : 14 GB
https://redd.it/18cs5h8
@r_hackintosh
AMD Laptop for Triple Boot Hackingtosh
I'm considering two AMD laptops for running a triple boot (Sonoma/Win11/Arch)
1) ASUS VIVOBOOK 16 M1605XA-MB941WS
2) MSI BRAVO 15 B7ED-013TH
The Asus has a Ryzen 9 7940HS with a Radeon 780m IGPU, while the MSI has a R5 7535HS A Radeon 680m IGPU, it's paired with an RX 6550M
​
Should I consider one over the other in regards to GPU compatibility with OSX 14.1? I'm thinking of getting the MSI Bravo since it has both an IGPU and a dedicated GPU, so if one isn't supported for hardware acceleration I can fall back on the IGPU, and use the RX6550M on Win/Linux...
https://redd.it/18csjcw
@r_hackintosh
iGPU 9 MB memory with no hardware acceleration and motherboard HDMI port no support.
First of all here are my device specs: (Desktop)
CPU: Intel Core i5-8400
GPU: I have 2 one is iGPU and other is dGPU iGPU-> Intel UHD 630 dGPU-> Nvidia GTX 1660 Ti 6GB OC (Gigabyte)
RAM: 16 GB DDR4 3000 MHz single stick
Storage: I have 2 SSDs Nvme M.2 and SATA Nvme M.2 -> Samsung 970 Evo Plus (500 GB) SATA -> Crucial MX 500 (250 GB)
Motherboard: Gigabyte B365M Gaming HD
Now from storage I am using my SATA SSD 250 GB to install hackintosh.
Now from GPU my dGPU is unsupported so automatically my iGPU is used.
Surprisingly when my monitor is connected to HDMI port of motherboard it doesn’t show display but when connected to dGPU’s HDMI it works.. how I don’t know..
Secondly when click on about device it shows 9 MB of graphics display plus says unknown display and also don’t show Intel UHD 630
Btw I have enable Internal Graphics via BIOS plus also choose the Initial Graphics Output to IGFX something.. it was Pcie 1 before..
Now while using windows I have no problem both the motherboard HDMI and graphics card HDMI works..
I am also not able to get hardware acceleration.. no transparency effects..
Please help!!!!!!!!!!
I’m installing Hackintosh Sonoma
https://redd.it/18conh7
@r_hackintosh
Issues upgrading from Catalina
Hi All,
CPU: Ryzen TR 12 core 1920xGPU:
RAM: 48GB
Motherboard Model: MSI x399 SLI Plus Ethernet Card:Intel BIOS revision:latest
Currently have stable Catalina 10.15.7 working with no reported issues.
Trying to upgrade to something newer and supported and booting via USB EFI, log and video of kernel panic attached.
I have followed the OC guide and upgraded my EFI to the current version of OC and thats where my issues have started, just not sure where i have gone wrong. Any pointers would be greatly appreciated.
Mick
https://drive.google.com/drive/folders/19\_m7S19rrRrASgEpAji5HznNgdLmkJ4p
https://redd.it/18cmdnf
@r_hackintosh
Can't use iCloud or even see Ethernet in Network settings.
My specs are:
Dell Optiplex 3060
iGpu UHD 630
Tp Link Wn727N usb WI-FI
I think my ethernet port is not physically working and I'm using a usb wifi with Chris1111's driver for big sur on github. I can sign in to App Store but not my account or iCloud. I discovered that ethernet connection doesn't exist in the settings so I tried Nulletgernet kext still nothing. I'm not so good at Opencore as I used to work with Clover bootloader before. I tried to follow Dortania's guide and as far as I understood I have to add the text to kernel and the ssdt patch something to ACPI section using OCAT. I did it to no avail.. I think I'm not doing it right somewhere. I tried Monterey, Ventura and Sonoma with the same result; nothing under Pci devices in Hackintool and no network device!
I think something is wrong with the EFI maybe..
What should I do? Will someone help fix my EFI please? Should I use something like ethernet to USB convertor? Or what?
BTW, activity monitor only shows statistics for uploaded data but when it comes to received data it shows 0 kb!.
Somebody please help me, I think I've done something wrong while configuring the EFI.
https://redd.it/18ciupe
@r_hackintosh
What smbios for i7-2600k and GT 730 ?
Since now this pc ran as a macmini using hd2000 graphics. Now I had to put an igpu as on windows 10 and 11 the hd2000 was too slow. What smbios should I put now and what do I need to add in the plist ? I have dsdt where I specify the hd2000. Thanks
https://redd.it/18cfq8v
@r_hackintosh
Vaio SVF15A15CDB -- Incorrectly mapped brightness keys
On this laptop, brightness down is supposed to be Fn+F5 and brightness up is supposed to be Fn+F6, but instead brightness down is Fn+Num Lk and brightness up is the Pause key. I have BrightnessKeys.kext (i also tried without it). I do not want to use a key remapper app to fix it -- I want to fix it directly in my EFI.
EFI: https://files.catbox.moe/plf5eh.zip
Basic specs:
CPU: Intel Core i5-3337u
GPU 1: Intel HD Graphics 4000
GPU 2: NVIDIA GeForce GT 735M (disabled with -wegnoegpu, I cannot use it in macOS as it is hooked up via Optimus)
Touchpad: Synaptics I2C
Touchscreen: I2C of some sorts
Audio: Realtek ALC233
Wi-Fi: Intel Centrino Advanced-N 6205
Ethernet: Realtek RTL8168/8111
OS 1: macOS Big Sur 11.7.10
OS 2: Windows 8 Home 64-bit
https://redd.it/18ccx62
@r_hackintosh
How to add alc to non supported codec?
I checked my linux and found out my audio codec is Conexant CX11970 and is is not supported by apple alc, how do i make it supported?
https://redd.it/18c7wzb
@r_hackintosh
Intel i3-5005U Audio Not working
I finished setting up my hackintosh but there seems to be no audio coming from it. It's my first time building a hackintosh and so far everything was going smoothly
I figured out my codec was ALC3234 Realtek
I added all the possible layout-id's with the alcid=xxx boot-args, but no luck
I also tried adding my pcie address directly through with the requirements but no luck
And for context I am using AppleALC.kext's latest version too.
I'm not really sure what the issue could be.
Tried various blogs and docs but no luck
I also thought that maybe it could be an issue with the SSDTs since i got them from a git repo for my laptop
https://redd.it/18c5z58
@r_hackintosh
Fenvi BCM94360NG Wi-Fi Card. Any special configuration to work on Ventura?
Please: In the Sonoma with OCLP it works at the maximum available speed, but in the Ventura I only reached about 60% of the available speed.
My Hackintosh is an Intel Desktop.
Tks.
https://redd.it/18c1w0o
@r_hackintosh
Ventura on Ryzen 3600/RX 590/B450
https://redd.it/18c1dch
@r_hackintosh
Mojave: crash on gray screen with cursor post-install
This is an issue I had with Clover originally, so I switched to OpenCore, yet it still persists.
Basically, installation went just fine, however the computer simply hangs just a second or two once the GUI pops up post-install. I assume it's a kernel panic, but no crash dumps are shown. In Clover I was able to prevent GPU drivers from fully loading, and got a glimpse of the panicking part (com.apple.iokit.IOPCIFamily), but I wasn't able to do the same with OC, and neither did disabling the loginwindow service help, so I can't tell you if the exact same issue occurs 100%.
The machine in question has the following specs:
\- Intel Core 2 Duo E8400
\- 6GB DDR2 600
\- Acer EG43M board
\- NVidia Quadro FX 3800 (i tried with an AMD R7 360, but that one hanged without even getting to spawn the GUI, and it too didn't dump a panic)
My EFI folder is as follows: https://www.mediafire.com/file/ksj0c6wic8nlloa/EFI.zip/file
Please mind the rather messy directory tree, I've been enabling and disabling certain drivers and kexts hoping I'd get it to work, but to no avail. I followed the dortania guide and related Yonah/Allendale/Penryn parts, but I had to take additional steps as the docs are a bit outdated.
https://redd.it/18by2iv
@r_hackintosh
Swapped 1Tb NvMe 2280 Rocket Sabrent with 2TB Samsung 990 Pro & now takes twice as long for Bios to come up. Takes 12 secs vs 5 sec with old M.2
Swapped 1Tb NvMe 2280 Rocket Sabrent with 2TB Samsung 990 Pro & now takes twice as long for Bios to come up. Takes 12 secs vs 5 sec with old M.2
Specs
Z390 Designare Gigabyte board
i9-9900K
5700 XT Nitro Plus - Sapphire
NZXT Kraken cooler
64GB G Skill Ram
iOS is Catalina 10.15.7
No changes to Bios or updates besides cloning hard drive using carbon copy cloner. Used clover to mount and put EFI on new M.2. I did change the CMOS battery too but reloaded old profile in bios settings.
Is this normal? I just don’t see why adding a faster read write makes for longer boot. To be clear I mean from the moment I hit the power button to Bios splash screen. The actual EFI and load of the operating system is still the same time to boot.
Can anyone help?
https://redd.it/18bv3o0
@r_hackintosh
Ventura on ryzen 5 5600, rx 6700 and 32gb ram
https://redd.it/18cxyj6
@r_hackintosh
Sonoma or Ventura for a hackintosh?
Hello guys,
I've got the following specs and would like a recommendation for the best OS for them.
Core i5 8500
Igpu UHD 630
Crucial Nvme SSD drive
I don't think the other specs are that important for the system right?
I tried Ventura it feels like a bit faster than Sonoma for me or is it because Sonoma is still very new?
Thanks!
https://redd.it/18cvc15
@r_hackintosh
kernel Panic that i don't understand
Help Please (new on opencore)
I got kernel panic that i can't even to identify (Storage controller problem maybe?)
​
https://preview.redd.it/1fps34eyfu4c1.jpg?width=4032&format=pjpg&auto=webp&s=fa5b22bcca514096c040f2e79045e87508eea944
virtual bool IONVMeController::start (IOService *): :793:I0NVMeController::start
[AHCI][HBA] [080000000] start : :266 :AppLeAHCI: :start
ifnet_attach: Waiting for all kernel threads created for interface XHC96 to get scheduled at least once.
ifnetattach: All kernel thread_
I tried several kent but no changes
\- NVMEfix
\- Sata unsupported
here is my efi config file:
[https://drive.google.com/file/d/1gM1-d5JFTdT997RgYm24NwVoYsM\_tEhM/view?usp=sharing](https://drive.google.com/file/d/1gM1-d5JFTdT997RgYm24NwVoYsM_tEhM/view?usp=sharing)
​
my pc spec:
CPU : AMD Ryzen 5600 6 Core
MOBO: ASrock B550m HDV
GPU : RX 580 8Gb
Have 3 Disk:
1 m.2 nvme
1 sata SSD
1 Hard disk drive
​
https://redd.it/18csbxp
@r_hackintosh
need help with how to go about the nootRX kext for my rx6700xt
im an absolute newbie to hackintosh and was wondering how I would proceed with installing macOS monterey from scratch along with the nootRX kext.are there any tutorials or easy to follow steps I could use to set everything up?
My computer:rx6700xt
r5 5600x
16 gb 3600 ddr4 ram
[I am running windows 11\]
https://redd.it/18cpyhl
@r_hackintosh
unable to login/boot after monterey upgrade on haswell laptop
I've run monterey on this laptop before without issue except for painfully slow ssd boot times since apparently it hates my ssd, but now its just not working. I had big sur running on this and decided to try monterey again since im using a different hard drive, so i changed my smbios and ran the update and everything was working as intented, until monterey actually installed. Setup process was fine until I tried to login, where the system then rebooted. It kept doing that until eventually it would reboot during boot and not even let me into a gui. I tried updating opencore and setting everything to debug/verbose, but im still rebooting right after the apple logo shows up after the verbose parts. Is there anything specifically I need to do to get this update working?
Im on a 4th gen i5 with an HD 4400 igpu
I never wiped the previous drive so that i could just revert the whole thing if it didnt work since the current one is just a clone of that drive, so im not really screwed or anything, but bluebubbles has some new functionality only availible on monterey and i would like to try it
EDIT: Fixed by removing my WLAN/Bluetooth kexts. It's not like that ever worked in the first place and this thing is a server running off ethernet anyways, so not too big a loss
https://redd.it/18cnkn0
@r_hackintosh
CPU + Mobo Choice
Hi all,
thanks for the previous advice.
I'm making another post to address some questions from the last one.
​
I current have an RX 6600 8GB, of which I intend to use for the device.
I have all other parts, just need motherboard and CPU combos ideas.
https://redd.it/18chwgf
@r_hackintosh
I can't install Hackintosh on my Dell Inspiron 7415 AMD
Greetings, I have a Dell Inspiron 7415 AMD, I have created an EFI with macOS Sonoma which works well, the system starts without problem but it does not recognize my internal SSD storage, I have used NVMe Fix kext but it does not work, my SSD is: kbg40zns256g nvme kioxia 256gb
https://redd.it/18cf8v0
@r_hackintosh
Slow wifi speed on 5 ghz network
I recently updated my hp 820 g3 laptop from monterey to ventura. Now when I am connecting to wifi, 5 ghz network is giving extremely slow speed, while 2.4 ghz is working fine. I have latest versions of Airportltlwm-Ventura. I have also tried itlwm but it also was having same problem.
PS: I have also tried -novht and -noht40 boot args, They also didn't work
https://redd.it/18ccied
@r_hackintosh
Can't install nor upgrade to Sonoma
After off and on of messing around with my Ventura Hackintosh, I've been trying to upgrade to Sonoma, but I can't seem to get past the Apple Logo with the progress bar not moving at all. This happens when I hit enter the installation from USB and when I hit enter on Mac installation that the Sonoma upgrade made. I've updated the kekts, reset the nvram (twice) and opencore, but still no progress.
Specs:
CPU: Ryzen 9 5950x
GPU: Radeon 6950XT (Works via ID Spoofing)
RAM: 128GB G.SKILL Trident Z
PSU : EVGA 1000W
Motherboard: Gigabyte Aorus Elite AX X570
Ventura is on a 4TB LEVEN JS600 SSD, while I have Win10 on a separate NvMe
Here is the log that Opencore made: https://pastebin.com/ydRt21rS
https://redd.it/18cbi3h
@r_hackintosh
Infrequent screen flickering when bowsing in Ventura. | Dell Precision 5520, Intel core i7 6820HQ, Intel HD 530 graphics.
https://redd.it/18c4cc9
@r_hackintosh
Running NVIDIA Graphics: Gigabyte Z390 Gaming X, Intel 8500T, MSI GTX 1060 3GB, macOS Sonoma 14.1.2
https://redd.it/18c4ols
@r_hackintosh
Stuck at OC: Watchdog status is 0
Hello, I'm new to hckintoshing and I'm stuck. On my display it says "OC: Watchdog status is 0" and I don't know what to do. Should I just wait for it to go away?
My specs:
CPU: Pentium 4425Y (Amber Lake)
GPU: Intel UHD 615 iGPU
Storage: Some noname microSD card
Laptop: Microsoft Surface Go 2
I had heard that my CPU isn't supported, but it boots from USB, it just doesn't go into the installer.
https://redd.it/18c1yhz
@r_hackintosh
Keyboard and Touchpad not working | Thinkpad X1 Carbon Gen8
Hi everyone,
I finished installing sonoma on my device thinkpad x1 carbon gen 8, but i cannot use keyboard and my touchpad.
I've tried to replace voodoo kext on my device and got this error.
what should I do?
https://redd.it/18bzyvw
@r_hackintosh
Help with booting
https://youtu.be/hM4mrtoMfsc?si=gduf4n9XBg3Nn1v1
https://redd.it/189cbis
@r_hackintosh
Mostly working Dell Precision 3630 - i7 8700/32GB RAM/RX 570/500GB M.2
https://youtu.be/XCo_pmZLv9w
https://redd.it/18buxem
@r_hackintosh
