CPU speed stuck at Base Clock (Z690/13900KF)
Hi there. Long time no see.
I've built a second hackintosh with the exact same mobo and CPU as the one I'm running now (Aorus Z690 ELITE DDR4 + 13900KF). I just had to copy my EFI from my first machine and it just works great. However, the only issue is the CPU speed. Mobos BIOS versions are not the same and I assume that may be the issue but I want your two cents on that first.
My first hack: CPU speed up to 5.2 Ghz, which is the setting in the BIOS. HT Off. Scoring around 32K in CB23.
Second hack: CPU speed up to 3.1 Ghz, not corresponding to the 5.2 in the BIOS. HT Off. Scoring around 20K in CB23.
Should I change the BIOS version of the new hack? Or am I missing something? Thank you for your help!
EFI: https://we.tl/t-4U57dPOnS0
https://preview.redd.it/nteyjgvuza0c1.png?width=481&format=png&auto=webp&s=86316eb5f36e05392af5f3b225eafc5ed6a5d674
https://redd.it/17v0so3
@r_hackintosh
How to block bad RAM chips
MemTest86 confirms that a specific memory region is failing on my 2019 16" MacBook Pro.
How can I block macOS from accessing this memory area? (I'm ready to do a clean install)
Would the "ReservedMemory" parameter in OpenCore do this? Or is there something else that would be better?
Since it's Apple hardware, would it be easiest for me to use OpenCore Legacy Patcher (even though this machine is still supported by Sonoma)?
How would I configure OpenCore to block access to memory given the report from MemTest86 that the following memory addresses are bad (consistent after several runs)?
29BA18270
29BA18D30
29BA19C30
29BA1DCF8
29BA1DFF0
29BA1E3B0
29BA1ECF8
29BA1EFF0
29BA1F6C8
​
https://redd.it/17uyris
@r_hackintosh
I need Macos for video editing, Hachkintosh vs M2Max?
I've been using Windows so far but i just need Macos to convert Prores Raw video files into Prores 4444.
So basically i need Macos for a small task, But the thing is i have huge video files to convert.
For Final Cut Pro or Premiere Pro, How much of difference will there be between Hackintosh and M2Max?
The Hackintosh setup i'm expecting is 13700K, 32gb Memory, Gen4 SSD, 6900XT or 7900XTX.
Some people say that in video editting the performance on M2Max will be way better but i'm curious because actually 13700K and 7900XTX are more powerful hardwares.
https://redd.it/17uvue1
@r_hackintosh
Switching from iGPU to dGPU (Radeon RX 5500m)
I'm currently grappling with a challenge while attempting to switch from my laptop's iGPU to the dGPU i.e., Radeon RX 5500m. Unfortunately, my laptop lacks a mux switch, so I'm trying to direct the display through the HDMI port. I've disabled the iGPU using the following boot flags: -wegnoigpu -wegswitchgpu agdpmod=pikera, and I've also installed the WhateverGreen kext.
However, I'm running into the following error:
[18.313728]: [9:0:0] AMD Error: The IOPCIDevice VRAM Memory Descriptor is NULL!
[18.313769]: [9:0:0] AMDRadeonX6000_AmdRadeonControllerNavi14::start() !!! Could NOT Create Controller Core Services.
[18.313772]: [9:0:0] AMDRadeonX6000_AmdRadeonControllerNavi14::start() !!! BIOS parser is NULL
I would greatly appreciate any insights or guidance from the community on tackling this issue. If anyone has experience with a similar setup or has suggestions to share, please lend a hand.
Laptop Specs:
* Model: HP Victus 16-e0162AX
* CPU: Ryzen 5600H
* GPU: Radeon RX 5500m
​
https://preview.redd.it/xp9eqi9c590c1.jpg?width=631&format=pjpg&auto=webp&s=f07792ad7e89afb153dcf0a1ed731e8611b03b71
https://redd.it/17uvn5i
@r_hackintosh
Laptop keyboard and trackpad don't work
Hi, I recently installed macOS Sonoma on my Lenovo Thinkpad L490 and the keyboard and trackpad doesn't work at all (only in boot menu). I installed VoodooPS2Controller.kext and VoodooInput.kext and still no result
https://redd.it/17uu9yy
@r_hackintosh
MacBook can’t connect to WiFi
https://redd.it/17up3lx
@r_hackintosh
finally I have successfully updated my ryzentosh to Sonoma
I finally update my ryzentosh from ventura to Sonoma
my spec are:
amd ryzen 7 5700x
msi thomawak II max
amd radeon rx550 (spoofed)
a kingston 500 GB SSD NVEM
and a crucial 500GB SSD Serial Ata (Sata)
for this I recommend two things 1: check that your kernel patches are updated 2:don't update from settings but from the store
ps. the only things that don't work are headphones and all speakers that use 3.5 mm jacks
https://redd.it/17ukwm5
@r_hackintosh
Mac OS Sonoma on MSI PC PRO Z370
Successfully installed Mac OS Sonoma on MSI PC PRO Z370 with IGPU as main graphic's, disable Nvidia card.After a week struggling with igpu, finally got it to work.Open core 0.9.6
Link for Efi:
https://drive.google.com/file/d/1Fyr8r9jttcIUgXoWwA8bUneoswq2KGiD/view?usp=sharing
Sonoma on MSI PC PRO Z370
https://redd.it/17ulp21
@r_hackintosh
HDMI not working on my Hackintosh, Thinkpad T470s core i5 7th Gen
had a problem at first with having the Wifi and Bluetooth to work, thanks to the big and fast response community here, I was able to fix it...
THE PROBLEM IS I CANT GET THIS TO DISPLAY ON ANOTHER MONITOR, the HDMI Port isn't working..Please help
https://redd.it/17uicil
@r_hackintosh
Making an "OpenCoreGPT"?
Currently, OpenAI has launched a tool to help users create their own chatbot and upload it to the GPT Store. I'm wondering if OpenCore's team is planning to make a chatbot to support users by that way.
By the way, I just updated from MacOS Ventura to Sonoma on the specs i3 4130 + RX 5600XT + 8GB RAM, better if i have an i5 4590 or higher!
https://redd.it/17ue9wm
@r_hackintosh
i got a wifi card
i got a wifi card and got wifi working but no bluetooth. i realized my wifi card doesnt have bluetooth 🤣🤣
https://redd.it/17udaur
@r_hackintosh
How to run Mac OS on Virtualbox
I want to do some iOS testing for my React Native application and apparently, I need a Mac to run Xcode. I want to know if it's possible to run Mac on my Virtualbox (Ubuntu host) so I could test since I don't have access to a Mac now? I need help to do so if possible.
https://redd.it/17sb1q9
@r_hackintosh
Realtek Bluetooth
I have a Realtek card (RTL8852AE), and the Bluetooth is connected internally through USB on my laptop. Any chance of getting it to work on my Hackintosh setup?
https://redd.it/17u9m6i
@r_hackintosh
A Tribute to Hackintosh
https://redd.it/17u7lvw
@r_hackintosh
Lenovo M700 Tiny Multiple Systems Hackintosh
Hi,
I have a PC, Lenovo Thinicentre M700 Tiny. There is an Intel core i3 processor with 4GB RAM memory. Intel graphics are also there. I would like to build a Hackintosh with 3 operating systems. I would like to have Lion or El Capitan with BigSur or some other system. I need your help!!! If any of you have EFIs for the M700 Tiny, please send it to me, send files, instructions and which tool should I use to create the USB stick. I would be very happy to receive an answer.
Best regards
Naserkhan
https://redd.it/17s4wpg
@r_hackintosh
Alguém tem uma placa de vídeo para doar 🫠💔?
Does anyone have a video card to donate 🫠💔?
https://redd.it/17v030h
@r_hackintosh
Hangs after boot error: AppleKeyStore:491:0: kernelrelayenable = 0
Hi all,
I've tried to hackintosh (big sur) an old desktop I have (Dell Optiplex 3040). Followed all the steps and got a few errors, but I'm stuck on the one in the image. Attached a log, config, and an image of the hang.
Config.plist: [https://drive.google.com/file/d/1L7LBcV-BnLh\9T9T-MJ4IS_THDxtK-k-/view?usp=sharing](https://drive.google.com/file/d/1L7LBcV-BnLh9T9T-MJ4ISTHDxtK-k-/view?usp=sharing)
Hang Log: https://drive.google.com/file/d/13Ymp9M\_O5Wcb4x24ptmn3AtaiL6alZt9/view?usp=sharing
CPU: Intel i3-6100 @ 3.7 GHz
GPU: Intel HD Graphics 530
Ram: DDR3 4GB
Storage: SATA 1TB
No dGPU.
I thank you in advance.
https://redd.it/17usw4i
@r_hackintosh
Lenovo V330-15IKB
Hi. Can i install hackintosh on this laptop? And if yes then how? Thank you for your answers!
Spec: Intel Core I5 8250U
Intel Uhd 620
8gb ram
256 gb ssd
1tb USB HDD
Intel bluetooth and wifi card
Uefi
https://redd.it/17uvzy4
@r_hackintosh
Freshly installed Sonoma but have no place to put the EFI from the USB installer
Have struggled for days to get my system to work with the Sonoma Opencore installer, then getting the ethernet to work and now its great except my SSD has no place to put the EFI from the USB....Is reinstalling again my only option or can i create what i need in disk utility or some other way?
Any help would be greatly appreciated
https://redd.it/17utn2f
@r_hackintosh
Performance Test In rayzentosh AMD RAYZEN 5 5625U
Hello every one , i was interested to check the performance btw the os systems , in hackintosh and windows , and thats surprise me little bit cause theres a different ,
also for people using the same CPU MOBILES AMD , and using plugin AMD GADGET to enable or disable the CORE BOOST , thats make big different on performance but unlikely high temperature ended up with, i will leave you with current result from Geekbench ,
​
\------- FOR AMD RAYZEN 5 = IN HACKINTOSH WITHOUT CORE BOOST
https://preview.redd.it/kj9lshyge80c1.png?width=1124&format=png&auto=webp&s=f9694685a1539be78659a9fd810559ee4a2ca454
\------ FOR AMD RAYZEN 5 = IN HACKINTOSH WITH CORE BOOST
​
​
https://preview.redd.it/kufru5yce80c1.png?width=1124&format=png&auto=webp&s=86fb867875ccd80e6228d06370a617abbbfc19b8
\------ FOR AMD RAYZEN 5 = IN WINDOWS TEST
https://preview.redd.it/p4qltnale80c1.png?width=1124&format=png&auto=webp&s=f448601113672a255d21d425b7d2cb6f257d6828
Thats was good for me , but currently i facing only one problem left ,
for sleep the laptop at first doesn't have S3 enabled i enable it using UMAF , than he worked fine he sleep and wake up , but the problem in waking UP All ports devices disconnected even bluethoot, but wifi still working , i Have PCI INTEL for wifi,
Only USB 3.0 WORKING but all others not work disconnected and i need to restart Laptop to make them work again, i hope some one have solution for thats,
For Softwares , the most Application working fine only Application thats using Virtualisation not work need it to get it work by using olds version or patching them , than its work fine.
And some Apps doesn't work good , for example All browser its crashing , the solution to fix thats by disabling hardware acceleration in setting of browser to make them work , thats problem still in work to fix , i using nootedred Project to Emulate Graphics Acceleration to make them work.
​
IF SOMEONE HAVE SOLUTION FOR SLEEP LET ME KNOW PLEASE , THANKS
https://redd.it/17ut5lp
@r_hackintosh
Easy EFI Maker
I'm making a Python application, would you use it?
(Early revision, downloads kexts, tools, and opencore from original sources and does NOT download macOS)
I plan to have it use ProperTree to snapshot the config.plist
and idk why I put "Select Motherboard", it's supposed to say "Select CPU Generation"
​
https://preview.redd.it/3tpdr85sh70c1.png?width=609&format=png&auto=webp&s=34430ef7b5a2e85153240006ab3a082630ddac2b
https://redd.it/17upb3w
@r_hackintosh
Asus Zephyrus G14 2020 freshly hackintoshed on Sonoma. Only issue is occassionally weirdly jumping touchpad and obviously no Nvidia GPU
https://redd.it/17uno3y
@r_hackintosh
What wifi card should i buy?
https://redd.it/17ui1j4
@r_hackintosh
Ventura i7 4790K slow boot and wakes from sleep
OC 0.9.6 OS Ventura MSI Z97 Gaming 5; 5x SATA 1x NVME; i7 4790K no dGPU
Everything works but not fine. Hi my haMac boots annoyingly long, and it randomly wakes up from sleep. It throws AHCI errors during boot. I have added pictures and link to my config.plist. Help please
​
PS. this is my first post here, and for some reason I cannot see picture and the link I added.
https://redd.it/17uid50
@r_hackintosh
Cpu caller 2 right after bootup
Hello guys I almost mananged to built a legacy opencore hackintosh
Specs:
CPU: i3 380m
GPU: Intel HD Arrandale graphics
WiFi: unknown
I’m using a legacy bios and used the bootice method to make it bootable on legacy and it boots but after it goes to the black apple logo screen (the finished one) it gives me a kernel panic im suspecting which is cpu caller 2 it used to be cpu caller 0 but I added boot flags from a pre built efi from another arrandale laptop I’m using ssdt xosi, ec laptop, and dsdt (if it’s called that) and I think I need hpet. I’m not so sure I’ll be able to try again tomorrow if anyone knows what to do please tell me. I wasn’t able to find anything that helps me
https://redd.it/17uf621
@r_hackintosh
No Audio - Acer C771 laptop, i3-6100U (Skylake), OpenCore 0.9.5, Mojave, SMBIOS set to MacBookAir7,2. Audio device shows up in IORegistry as HDAS but no sound interface shows up in Settings->Sound
https://redd.it/17ud8hd
@r_hackintosh
Help with this error please!
https://redd.it/17u71w3
@r_hackintosh
Need help with kexts asap
Hello, I am trying to build a ryzentosh and everything is going smoothly, I just booted into the installation usb without any errors but I just noticed it is not recognising my ethernet. I have installed IntelMausi as ethernet kext. What kext should I use? On the website of my mobo, it just says Gen 1 Intel GbE Card
Specs:
Ryzen 7 2700X
RTX 3060 (as for now, I will replace with GT710)
Gigabyte Aorus B450 Pro WiFi
16GB RAM
256GB XPG S40 SSD NVMe
https://redd.it/17u7svt
@r_hackintosh
Need help at apple logo stuck
Hello everyone I got my config.plist from a friend in here (we have same cpu) and I wrote smbios uuid serial etc. Now I am stuck at applr logo can anyone help?
https://redd.it/17u6hcw
@r_hackintosh
I got everything working except the track-pad.
I looked online to see if i could find something regarding my track-pad. It works but it feels weird and off to move the cursor and the clicking is inconsistent and constantly thinks i am holding it down. None of the gestures work except when i use 2 fingers for scrolling. I am running MacOS 14.1 Senoma on a Dell Latitude 5480. I have a triple boot setup with Linux and windows alongside it.
https://redd.it/17u5a90
@r_hackintosh
