High Sierra on old Toshiba
​
!img
CPU + GPU Intel i380M - Arrandale, iGPU")
Finally after 4 days of tinkering - starting from the bottom (Learning about Clover/OpenCore, messing with kexts, quirks, ACPIs and whatnot). Network needs some work, but overall stable. I still haven't figured out how to boot it without the USB, since no native support for (U)EFI, but I am done with this machine for a while. Huge thanks goes to all the people in the Hackintosh community and Internet Archive.
https://redd.it/17ojkmp
@r_hackintosh
XFX R7950 flashing ?
I see a cheap XFX R7950 near to me for $30. So did some googling on flashing it. Some articles said XFX cards can't be flashed. Some articles showed a step by step. So I'm confused.
https://redd.it/17odort
@r_hackintosh
Help! Can't open Discord software
AMD: R75800H
MACOS: 12.7
Open Discord and it flashes and crashes!
https://redd.it/17oarti
@r_hackintosh
Stuck on #EB|LOG:EXITBS:START
hello everyone today I tried to install mac OS Monterey on my Asus Tuf Gaming A17(FX706IH) laptop but got stuck on #EB|LOG:EXITBS:START. please help with hackintosh installation on my laptop
https://redd.it/17o6shw
@r_hackintosh
Empty / headless framebuffer ID for UHD 630 in a i9-10900k processor
I want to use the iGPU for computing only in my hackintosh that is running the latest version of macOS Ventura (mobo is MSI z590-A Pro and dgpu is MSI - AMD Radeon RX 6600 ARMOR 8G- 8GB GDDR6). I’m using the iMac 20,2 SMBIOS and booting OpenCore 0.9.6. What is the best Empty / headless framebuffer ID to define in OpenCore device properties for the intel UHD 630 igpu in a i9-10900k processor?
I’m currently using the one that Dortania OC Install Guide indicates for Comet Lake which is 0300C89B but I have seen in some internet posts that it’s better to use an id that aligns with the CPU you’re using, for example 0300C59B in my case. I also saw 0300C49B as an alternative.
Also, in Hackintool system tab, I see that the vda decoder failed. I did the vda decoder check in terminal that is suggested in dortania and I got a 12473 error. I was wondering if someone else with a similar configuration has seen the same message for the vda decoder.
Any feedback from this great community is highly appreciated.
https://redd.it/17nwi06
@r_hackintosh
Kernel Panic
I am a beginner in hackintosh, and I do not know what to do. The fact is that the first attempt to install the Hackintosh was relatively successful. I was able to log into the bootloader, but unfortunately I could not restore the OS, because it was high sierra, then I read that I could disable dGPU(1050ti) and use iGPU(intel uhd 630), so I started the process of installing macOS Big Sur, but I failed because, as I understand it, I had a kernel panic. Then I decided that I would install macOS Catalina to create the perfect bootloader, but even then I couldn't do anything. I created a loader without additional kexts, only with the necessary ones (lilu, VirtualSMC, Whatever Green), and tried to fix the error on the Dortania guide, but nothing changed. Please help me, tell me what my mistake is. How do I correctly create a config that will be correct with the dGPU disabled.
​
​
Here is the debug file that was on the last run.
https://drive.google.com/file/d/1CJPr9x6wHmtb5kO5YiC5\_fykozWdGOGn/view?usp=drive\_link
00:000 00:000 AAPL: [EB|#LOG:INIT\] 2023-11-05T00:40:47
00:030 00:030 AAPL: [EB|#VERSION\] bootbase.efi 422.140.3\~2 (Official), built 2020-06-07T17:23:12-0700
00:058 00:027 AAPL: [EB|#BUILD\] BUILD-INFO[306\]:{"DisplayName":"bootbase.efi","DisplayVersion":"422.140.3\~2","RecordUuid":"D49FA16E-32C0-433B-A742-7405C713BE39","BuildTime":"2020-06-07T17:23:12-0700","ProjectName":"efiboot","ProductName":"bootbase.efi","SourceVersion":"422.140.3","BuildVersion":"2","BuildConfiguration":"Release","BuildType":"Official"}
00:085 00:027 AAPL: [EB|#H:IS\] 0
00:113 00:027 AAPL: [EB|#WL:MODE\] 0
00:141 00:027 AAPL: [EB|#CONFIG:SRC\] <default>
00:168 00:027 AAPL: [EB|#CONFIG| 0\] boot-save-log : 0x0000000000000002 (0x0000000000000002 < 0xFFFFFFFFFFFFFFFF) <default>
00:196 00:027 AAPL: [EB|#CONFIG| 1\] wake-save-log : 0x0000000000000002 (0x0000000000000002 < 0x0000000000000002) <default>
00:223 00:027 AAPL: [EB|#CONFIG| 2\] console : 0x0000000000000001 (0x0000000000000001 < 0x0000000000000001) <default>
00:251 00:027 AAPL: [EB|#CONFIG| 3\] serial : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default>
00:279 00:027 AAPL: [EB|#CONFIG| 4\] embed-log-dt : 0x0000000000000000 (0x0000000000000000 < 0x0000000000000000) <default>
00:306 00:027 AAPL: [EB|#CONFIG| 5\] timestamps : 0x0000000000000000 (0x0000000000000000 < 0xFFFFFFFFFFFFFFFF) <default>
00:334 00:027 AAPL: [EB|#CONFIG| 6\] log-level : 0x0000000000000001 (0x0000000000000001 & 0x0000000000000001) <default>
00:362 00:027 AAPL: [EB|#CONFIG| 7\] breakpoint : 0x0000000000000000 (0x0000000000000000 & 0x0000000000000000) <default>
00:389 00:027 AAPL: [EB|#CONFIG| 8\] kc-read-size : 0x0000000000100000 (0x0000000000100000 < 0xFFFFFFFFFFFFFFFF) <default>
00:417 00:027 AAPL: [EB|#H:IS\] 0
00:445 00:028 AAPL: [EB|#WL|0\] 0x01 0x01 0 0x00
00:473 00:027 AAPL: [EB|#BRD:NV\] Mac-AA95B1DDAB278B95
00:501 00:027 AAPL: [EB|#WL|1\] 0x01 0x01 2 0x00
00:529 00:028 AAPL: [EB|`BST:IDT\] {
00:557 00:027 AAPL: [EB|`BST:IDT\] }
00:584 00:027 AAPL: [EB|#WL|2\] 0x01 0x01 3 0x00
00:612 00:027 AAPL: [EB|#WL|3\] 0x01 0x01 4 0x00
00:640 00:027 AAPL: [EB|#BRD:NV\] Mac-AA95B1DDAB278B95
00:757 00:116 AAPL: [EB|#WL|4\] 0x01 0x01 5 0x00
00:784 00:027 AAPL: [EB|`H:CHK\] BM: 0x0000000000000000
00:812 00:027 AAPL: [EB|`H:CHK\] Err(0xE) @ GV boot-signature
00:840 00:027 AAPL: [EB|#WL|5\] 0x01 0x01 23 0x0E
01:042 00:202 AAPL: [EB|`H:CPM\] Err(0xE), (24, 24) @ GV Persistent-memory-note
01:072 00:029 AAPL: [EB|#SB:P\] 0x0
01:100 00:027 AAPL: [EB|`B:MN\] BM: +FD
01:127 00:027 AAPL: [EB|#LIMG:DP\] VenMedia(957932CC-7E8E-433B-8F41-D391EA3C10F8)/MemMap(10:100000000-100001000)/DMG_000000001DB86E9E.dmg/VenMedia(004B07E8-0B9C-427E-B0D4-A466E6E57A62)/HD(Part1,SigC1C39F41-02BF-4DFA-99FE-784538B38D71)
01:155 00:027 AAPL: [EB|#LIMG:FP\] \\System\\Library\\CoreServices\\boot.efi
01:183 00:027
Success Ryzentosh Sonoma 14.1
https://redd.it/17o0kyi
@r_hackintosh
Sonoma with 13700K and 6950XT
https://redd.it/17nzx0o
@r_hackintosh
Is hackintosh high sierra supported on dell optiplex 390
Is hackintosh high sierra supported on dell optiplex 390
Here are my specs
CPU: I5 2400
ram: 16GB
GPU: AMD FirePro W2100
SSD: 256GB ssd crucial
So that’s my specs
https://redd.it/17nxf4t
@r_hackintosh
What is the "RTC/HID Activity" in the pmset log, and why does it happen even if I don't interact with the laptop?
Sometimes, my laptop wakes on its own, and I can't prevent it. I suspect the "RTC/HID Activity". For example, today, it was the last event in the log that woke the laptop:
My pmset configuration and the sleep\/wake log.
# Specs:
CPU: Intel Core i5-10210U,
GPU: Intel UHD Graphics 620,
WLAN Adapter: Intel Wireless-AC 9560 160MHz,
Audio Card: Realtek ALC256,
SSD: Western Digital SN730 512GB NVMe,
RAM: Samsung 8GB (4x2) 2400MHz DDR4.
# Update:
My prediction turned out to be true.
Fixed by enabling the kernel patch "Disable RTC wake scheduling" (which already exists in the Sample.plist):
The log before and after the fix.
https://redd.it/17l8qxj
@r_hackintosh
Pls Help, my first time building an EFI. Pls help me install Monterey on my laptop
Hardware:
* CPU: Intel(R) Core(TM) i5-9300H CPU @ 2.40GHz
* GPU: uhd630(Integrated: Intel Coffee Lake-H GT2 - Integrated Graphics Controller) + gtx 1650
* RAM: 8x2 ddr4
* Motherboard/Laptop model: BIOS Version 1715.81.2.0.0/ Legion Y540
* Audio Codec: Realtek ALC257 @ Intel Cannon Point PCH - cAVS (Audio, Voice, Speech) \[B0\] PCI
* Ethernet Card: Realtek RTL8168/8111 PCI-E Gigabit Ethernet Adapter (PHY: Realtek RTL8111) PCI
* Wifi/BT Card: Intel Wireless-AC 9560 160MHz Wireless Network Adapter PCI
* What guide/tool followed: \[Links and/or names, links preferably\] followed this [https://dortania.github.io/getting-started/](https://dortania.github.io/getting-started/) and this [https://www.youtube.com/watch?v=oHPDFyZL1bw&t=4s](https://www.youtube.com/watch?v=oHPDFyZL1bw&t=4s)
* What part I got an issue with: \[Describe your issue **WITH** pictures attached if possible\] I restart my PC >then select my pendrive >then select resetvram >then EFI dmg >then it takes some time and some code comes and then it gets stuck there(from what I could understand there was error written in a lot of lines)
* What files/config I am using: my EFI for (macOS Monterey) --> [https://drive.google.com/drive/folders/17KPBlhGXsbhx\_wA0HI0tEJTt6Fwu9Ct7?usp=sharing](https://drive.google.com/drive/folders/17KPBlhGXsbhx_wA0HI0tEJTt6Fwu9Ct7?usp=sharing)
* Extra Info: \[Add something you need to point out about your setup\] one more thing I want to say is I have windows installed on my 512gb samsung SSD and I made a separate 200gb partition in it for macos and I want to dual boot macos in that 200gb partition pls help me through all the process.
https://redd.it/17l95o0
@r_hackintosh
How to have another drive
Hey I just got my pc all set up and the os is installed on my 128gb ssd. I have another extra 1tb HDD but I'm unable to install apps on it. How do I set it up so that it work like another mac os drive (in similar way to Windows)
https://redd.it/17lbv31
@r_hackintosh
Any success installing Hackintosh on the Asus ROG Advantage Edition?
Hi everyone, first time posting here. I have the 2021 Advantage Edition all AMD and was wondering if someone has successfully installed Hackintosh on this laptop?
Specs are following:
CPU: Ryzen 5900HX
GPU: Radeon 6800M
RAM: 2x8GB Samsung 3200Mhz
1TB NVMe
Any help appreciated!
https://redd.it/17nkr76
@r_hackintosh
How possible to use Hackintosh on my PC (ryzen5 7500f)?
Specs:
cpu - ryzen5 7500f
gpu - rx 6800
ram - ddr5
Sry if this stupid question, but I didn't find any info about ryzen 5 7500f
https://redd.it/17njqyu
@r_hackintosh
Help with Setting things Up
Hello,
I am new to the Hackintosh community and I dont know what to do or how to setup. I want to set up an macOS to my Windows 11. People were posting their specs so I thought I would want to send mine too.
I watched the tutorials from YouTube but I didnt understand anything. If someone can explain it to me how to set it up and send suitable files for my specs.
Motherboard: ASUS B450M Dragon
Processor: Ryzen 3 3100 4-Core
GPU: XFX RX570
16 GB Ram
https://redd.it/17ll677
@r_hackintosh
No Storage Devices Recognized in Ventura/Sonoma
So I've been successfully Hackintosh'ing since Sierra but I can't seem to crack this weird issue where none of my internal drives show when loading Ventura or Sonoma.
I'm currently running a successful Big Sur (11.6.7) installation where everything works as expected. I am able to CCC my current install to a new drive and update that to Sonoma, and Sonoma will load (not cleanly but it loads), but the only drive that shows up in Finder/Disk Utility is the primary boot device.
When I try to do a fresh install, the only device that shows is the installation USB itself when it gets the point where it asks you where you want to install to, which happens with both Ventura (13.6.1) and Sonoma (14.0 and 14.1).
I'm guessing it must have something to do with my config, drivers, or kexts that I'm using. I even went back through the Dortiania OpenCore config guide to rebuild my config from scratch and same thing. Has anyone encountered this before?
My hardware setup:
OpenCore 0.9.5
Asus Maximus XIII Hero
Intel i9-11900K
64gb Corsair Dominator Platinum
GPU1 - Nvidia 3080Ti (Windows boot)
GPU2 - AMD Radeon RX580 (macOS boot)
Internal SSDs (listed in order by M.2 slot, all 1TB each)
Samsung 980 Pro (Windows)
WD SN850X (\*New drive for new macOS install/Secondary EFI just to try settings)
WD SN850 (macOS Big Sur - current install/Primary EFI)
Samsung 980 Pro (exFat storage drive)
​
Github Repo for EFI folder: https://github.com/clveranis/MaximusXIIIHero-11900k-EFI
https://redd.it/17oicr9
@r_hackintosh
Graphics issue on Sonoma
Hey guys i need some help after upgrading an Sonoma from Ventura when i had problem for Graphics without some transparency and blur effect kinda very lag and very slow. I was spoof in MacBook Pro 2017 to 2018 for upgrade! But it shows "Intel Graphics KBL" without 620 and it came free graphics into 8MB than 2048MB! Maybe anyone knows about graphics acceleration fix or spoofing something!
Here are specs:
Model: Acer Swift 3 (SF314-54)
MacBook Model: MacBook Pro 2017 originally and spoof into 2018 model
Processor: Intel Core i3-7020U (2.3Ghz) Kaby Lake
iGPU: Intel HD Graphics 620
RAM: 8GB
Storage: 1TB HDD + 128GB NVMe SSD
Opencore version: Probably 0.9.2
https://redd.it/17ob1ry
@r_hackintosh
Help installing MacOS Tiger on an old laptop.
I'm kinda new to hackintosh I started doing it in the summer of this year. I want to create a hackintosh for 10.4 but I don't know how to get the image for it. If anyone is able to help please comment or DM me.
https://redd.it/17o6nqy
@r_hackintosh
Help! Stuck on Startup Options with My MacBook Air M1 😩
I'm in a real jam with my MacBook Air M1, and I'm hoping some of you tech-savvy folks can lend a hand. I'm stuck on the dreaded startup options screen, and it's becoming a real headache!
Every time I try to reinstall macOS, the installation process takes forever – we're talking a whole day – and just when I think I'm getting somewhere, it hits me with a "pkdownload error errror 8" and leaves me high and dry.
I've tried mashing the keyboard shortcuts, hoping for a magic exit, but no luck. And when I click on the Apple logo to select my startup disk, it just keeps on loading indefinitely.
I need some real-life, practical advice to get out of this never-ending loop. If any of you have faced this before or have any genius ideas on how to break free, please, help a fellow Mac user out! 🙏
https://redd.it/17nv5ey
@r_hackintosh
AAPL: [EB|#LIMG:OPT\] ()
01:210 00:027 AAPL: [EB|`B:OBV\] BM: +DMG
01:238 00:027 AAPL: [EB|`B:OBV\] BM: +ROS
01:266 00:027 AAPL: [EB|#RPS\] R?0 P?0 S?0
01:301 00:034 AAPL: [EB|`OPT:LXF\] 'LF (\\\\System\\\\Library\\\\CoreServices\\\\com.apple.Boot.plist)
01:328 00:027 AAPL: [EB|`LD:LF\] FIO: 0, DIR: 1, P: \\\\System\\\\Library\\\\CoreServices\\\\com.apple.Boot.plist, DP: 0
01:362 00:033 AAPL: [EB|`LD:OFS\] Err(0xE) @ OPEN (\\\\System\\\\Library\\\\CoreServices\\\\com.apple.Boot.plist)
01:390 00:027 AAPL: [EB|`OPT:LXF\] Err(0xE) @ 'LF
01:417 00:027 AAPL: [EB|`OPT:LXF\] 'LF (Library\\\\Preferences\\\\SystemConfiguration\\\\com.apple.Boot.plist)
01:445 00:027 AAPL: [EB|`LD:LF\] FIO: 0, DIR: 1, P: Library\\\\Preferences\\\\SystemConfiguration\\\\com.apple.Boot.plist, DP: 0
01:502 00:056 AAPL: [EB:#KF\] ()
01:529 00:027 AAPL: [EB|#MBA:CL\] ()
01:557 00:027 AAPL: [EB|#MBA:NV\] (-v keepsyms=1 debug=0x100 -wegnoegpu)
01:585 00:027 AAPL: [EB|#MBA:KF\] ()
01:613 00:027 AAPL: [EB|#MBA:OUT\] (-v keepsyms=1 debug=0x100 -wegnoegpu)
01:641 00:028 AAPL: [EB|#LOG:VERBOSE\] 2023-11-05T00:40:49
01:750 00:108 AAPL: [EB|#OPT:BM\] 0x2825082
01:777 00:027 AAPL: [EB|`OPT:LXF\] 'LF (\\\\System\\\\Library\\\\CoreServices\\\\PlatformSupport.plist)
01:805 00:027 AAPL: [EB|`LD:LF\] FIO: 0, DIR: 1, P: \\\\System\\\\Library\\\\CoreServices\\\\PlatformSupport.plist, DP: 0
01:855 00:050 AAPL: [EB|#B:VAw\]
01:883 00:027 AAPL: [EB|`B:MN\] BM: ROS
01:910 00:027 AAPL: [EB|#WL|6\] 0x01 0x01 19 0x0E
01:938 00:027 AAPL: [EB|`CS:CSKSD\] {
01:968 00:030 AAPL: [EB|`G:CS\] } Ok(0)
01:996 00:027 AAPL: [EB|`LD:LF\] FIO: 0, DIR: 1, P: <null string>, DP: 1
02:035 00:038 AAPL: [EB|`B:SBS\] SZ: 621112
02:068 00:032 AAPL: [EB|#B:SHA\] 4f3bba9614aa0dbae1943ab55b83beac7e278986
02:096 00:028 AAPL: [EB|`WL:PWLFNV\] Err(0xE) @ GV wake-failure
02:124 00:027 AAPL: [EB|`WL:DT\] Err(0xE) @ WL:PWLFNV
02:152 00:027 AAPL: [EB|`WL:PWLFRTC\] ! @ RTC:R
02:180 00:028 AAPL: [EB|`WL:DT\] Err(0xE) @ WL:PWLFRTC
02:207 00:027 AAPL: [EB|`LD:LKC\] BM:R -> (System\\Library\\PrelinkedKernels\\prelinkedkernel)
06:116 03:908 AAPL: [EB|`LD:LKFS\] } Ok(0)
06:144 00:027 AAPL: [EB|`LD:LKC\] } Ok(0)
06:174 00:030 AAPL: [EB|#FWFM\] 0xFFDFFF7F
06:202 00:027 AAPL: [EB|#FWFT\] 0xFD8FF576
06:230 00:028 AAPL: [EB|#CSR:IN\] 0x00000040
06:257 00:027 AAPL: [EB|#CSR:OUT\] 0x00000040
06:292 00:034 AAPL: [EB|`BST:FBS\] {
06:320 00:027 AAPL: [EB|`BST:FBS\] BA.ADSZ: 0
06:437 00:116 AAPL: [EB|`BST:FBS\] BA.KSDSZ: 0
06:465 00:027 AAPL: [EB|`B:WFDW\] Err(0xE), 0 @ LocHB 71B4903C-14EC-42C4-BDC6-CE1449930E49
06:493 00:028 AAPL: [EB|#LOG:DT\] 2023-11-05T00:40:54
06:522 00:028 AAPL: [EB|#LOG:EXITBS:START\] 2023-11-05T00:40:54
Also my my pc specs:
CPU: intel i3 8100
GPU: gtx 1050ti (i'll disabled it)
RAM: 8 gb
Motherboard/Laptop Make and Model: ASUS PRIME H310-PLUS
Ethernet Card: RealtekRTL8111
BIOS revision: 3202
And my config file:
https://drive.google.com/file/d/1eqzSlhR4F3A87KZ3pyM1IYDt5sqWfYEK/view
​
https://redd.it/17nx5dz
@r_hackintosh
frustrating story
https://redd.it/17o0ibl
@r_hackintosh
Success i7 12700k Sonoma 14.1
https://redd.it/17o0ojf
@r_hackintosh
I'm almost there l, help a newbie out
I'm trying to install Ventura (I have 2 pendrives with same EFI one with Catalina, second with Ventura, both offline installer made by burning .RAW images with BalenaEtcher)(I want to install Ventura but thought maybe the issue would be solved if I first install older OS)
I have Lenovo legion y540
i5 9300h
Uhd 630
16 gigs ram 8x2
Samsung sm981a nvme
1. I successfully passed the boot stage
2. Successfully formatted a partition (not the whole nvme) into APFS
3. Successfully rebooted and clicked on installer
4. When I click on the installer it works fine until it reaches around the end of the progress bar and says less than a minute remaining
Then it freezes there
I've retried multiple times and exactly the same behaviour occurs every time
Now when I try this with the Catalina pendrive(all of the above steps happen and I get stuck at Step 4.)
But what's more weird is that when I try this with the Ventura pendrive( I pass Step 1 and 2 but I get stuck at Step 3. When it starts installing it freezes at 12 minutes remaining) and doesn't even get to the step 4. Where the installer shows up in boot
Pls help any suggestions would be very very appreciated
I am also sharing my EFI pls if you have the time check through it.
EFI: https://drive.google.com/drive/folders/1VaNvM1OQgCv9pqOalGjU6nc8b_pMu2GY?usp=sharing
https://redd.it/17ny5ni
@r_hackintosh
Sonoma With Fully Supported RX 6700 XT (No DRM though)
https://redd.it/17nw3rl
@r_hackintosh
macOS Catalina on Asus X200CA
https://redd.it/17nrwl5
@r_hackintosh
Any workaround for Nvidia GTX 1660 Super
Hi was wondering if there is a workaround to get NVidia GTX 1660 working / partially working for hackintosh? Thanks.
https://redd.it/17npfjd
@r_hackintosh
Lookup error Opencore after installation of Ventura (Alder Lake)
https://redd.it/17nmftk
@r_hackintosh
Thinkpad T480 + 40AH Dock DisplayPort Possible??
Hi! will this combination work in a hackintosh?? a thinkpad T480 on the 40AH pro docking station with two display (normal, not 4k)
https://redd.it/17ld3xe
@r_hackintosh
Nx_mount:1580 on Ventura
Need some help since all those same Reddit post are dead.
Specs
I5 3470 Ivy Bridge
GT420 Fermi
16GBS of ddr3 ram
256GB unlabeled SSD SATA
https://redd.it/17ni4pj
@r_hackintosh
Hackintosh Monterey not working on 2nd monitor.
Hi everyone
I hope you many fine folks can help me with my problem. I have a Gigabyte H470 hd3 motherboard with an Intel i5 10400 cpu, 16 gigs of ram and gforce gt710 video card. And two acer monitors. When I run hackintosh big sur everything works fine with the two monitors. But when I run hackintosh Monterey it only works on one monitor. The two monitors are connected hdmi with going through a dvi to hdmi adapter. Any help you can provide wo be most appreciated. Thank you
https://redd.it/17m1oe9
@r_hackintosh
