Ventura with fully supported 6700XT 12GB
​
https://preview.redd.it/4u2jvgbg0ayb1.png?width=2560&format=png&auto=webp&s=4d1f4db62f04580a50616b6f9c9beab4c676ce28
Initially had Big Sur installed, but there was zero graphics acceleration with my 6700XT, so it was basically unusable. Even minimizing a window would lag out for 5 seconds or so.
Now it's running like a dream at 144hz with the added benefit of Ventura.
​
https://redd.it/17nfqk8
@r_hackintosh
Sanity Check, Why can't I get 4K@60Hz ?
Gurus
I have an ASUS H110I-PLUS running MacOS Monterey with a HD630 with HDMI for video, no Display Ports that supports 4K@60Hz
At the moment I'm getting 4K@30Hz, so so close but not where I'd like to be
Can I ask someone to eyeball my config.plist and offer some advice ?
(note that I'm saying HD630 not UHD630)
https://redd.it/17ndhge
@r_hackintosh
Looking for hackintosh guide for i7 920 (Bloomfield)
Parts
\- i7 920
\- Asus rampage ii motherboard
\- RX 580 4gb
\- 16gb ddr3 ram
This will be my first even hackintosh, so I have no idea what I am doing. Any help will be appreciated. Thank you.
https://redd.it/17m2joj
@r_hackintosh
Booting from Clover
Hi, so I've managed to install macOS on my desktop however every time I want to boot into the OS I have to input the following argument -igfxvesa -v alcid=66 in by hand before selecting the OS.
Is there anyway to bypass this or make the argu by default? It's just tedious. Or is it better to try open core?
https://redd.it/17n3c1s
@r_hackintosh
Mac os Sonoma on laptop
i have instal mac os sonoma 14 on ryzen 5 5600h based pc with igpu dgpu disabled (rtx 3050)
ram 16 gb ssd nvme 512 gb
camera also works and i tested xcode simulator and an
whats not working-
wifi -realtek rtl8852ae
amd array mic
hdmi but type c has dport
laptop sleep
https://preview.redd.it/fdws1pdfd7yb1.jpg?width=960&format=pjpg&auto=webp&s=0e612ff02a55e0069eeb0ff1c4aefc770f7c7d07
https://preview.redd.it/o5m6gpdfd7yb1.jpg?width=720&format=pjpg&auto=webp&s=f4b178e65ddbbc0f14160d0ac31652bc0c5aabae
https://preview.redd.it/6e9gdsefd7yb1.jpg?width=720&format=pjpg&auto=webp&s=a6446a8670003ebaef666677395f00d6b682bccb
https://preview.redd.it/bongsodfd7yb1.jpg?width=960&format=pjpg&auto=webp&s=1285bfa136fc140b0a0a0c6df78e4c07f6ac4941
https://redd.it/17n5uwv
@r_hackintosh
Need advice on laptop display (4K vs 2K) for hackintosh
Hi. I'm looking to buy a laptop, something from Thinkpad X1 series, to be specific, and I'm in doubt about screen options. Those are:
- 14" 2K
- 15.6" 4K
- 14" 4K (overkill, I know, but there's that one high-end X1Y5 on sale...)
My thoughts:
- I'd really like to try that fabled HiDPI stuff.
- I'm not really concerned about decreased battery life.
- I am concerned about performance of UHD620/630 on 4K. Right now, for example, I can play some light games on HD520 in 1920p, and I'm not sure if they will run on HiDPI display.
- I've also heard some conflicting information about fractional scaling in macOS. With 4K on 15.6" it'll be integer scaling to 200%, of course, but how does 2K/4K looks on 14"?
Anyone's experience and suggestions?
https://redd.it/17n55n1
@r_hackintosh
Macos 10.9 on a modern laptop?
hey guys, I dont game or care about support, I was just wondering if I could hackintosh an old version of macos on my laptop. here are the specs:
Processor1x 10th Generation Intel® Core™ i7-10510U Processor(Core i7-10510U
Memory1x 16G LPDDR3 2133
Operating SystemWindows 10 Home 64(EN:English)
Hard Drive1x 512PCIeNVMe
Wireless Network1x Intel® Wireless-AC 9560 2x2 AC & Bluetooth®
5.0Ports1x HDMI 1.4; SIM (rear facing); native ethernet; 2 USB 3.1(Type A) Gen1; 2 Type C (Thunderbolt); Audio Jacks; 2 USB 3.1(Type C); 1 USB Type C;
WWAN SIMCamera1x IR&HD with Array Microphone & ThinkShutterGraphics1x
Intel UHD GraphicsMonitor14.0
## if my laptop is too new, I will install catalina with customization tools.
https://redd.it/17n2a6s
@r_hackintosh
11900k - Gigabyte Vision D Z590 - Thunderbolt issues
Hi,
I have a CalDigit TS3 Dock on the Thunderbolt Port. I know this works, I have tested it on this machine under Windows and on another Mac (Apple original).
Under my Hack, I see the following (in System Profiler):
* USB Devices connected to the Dock work perfectly (Audio, card reader, mouse, keeb)
* Thunderbolt drivers show up under PCI (Maple Ridge TB4, Maple Ridge USB)
* Theres an „ethernet“ element with Thunderbolt@xxx but drivers not installed
* No Dock shows under Thunderbolt tab (shows here with my macMini)
* No TB functions work: Low Transfer Speeds and Ethernet connection on Dock not recognized
Any ideas? I feel this might be VT-d related. I have it turned on in BIOS though, a fixed DMAR SSDT and a table delete patch in OpenCore config.
I also have the MAPLE-RIDGE SSDT for HotPlug, disabling / enabling does not help.TB ports are not present in my custom usb mapping SSDT.
https://redd.it/17mrak5
@r_hackintosh
Need help
Guys, I need someone to build a repo with xcode please
I don’t have access to it, it’s too big for me!
Anybody?
https://redd.it/17mw2ol
@r_hackintosh
Snapdragon Elite X
Sanpdragon Elite X is arm based . apple worked people created this. my question is can we install macos in this processor in feature. please forgive me if my question is noob .
https://redd.it/17mtcck
@r_hackintosh
Trying to install Ventura from Big Sur
Im kind of losing my mind here. Things don't really seem to be making any sense as to why I can't get into the installer.
​
Based on everything I've read, my opencore EFI config that I use to boot my Big Sur install should still be able to boot me into a Ventura installer, or even a monterey installer. Yet for the life of me I can't get this to happen.
​
I even have an updated EFI I've made where I've replaced whatevergreen with nootrx, as that is my WHOLE point in upgrading to ventura. I have an RX 6700XT and the only way for me to get full acceleration is to upgrade to a newer version of MacOS.
​
I've uploaded both EFIs along with a picture of the errors I'm seeing trying to boot into the ventura installer. I made the installer inside my Big Sur install, so it's a complete installer not a recovery installer.
EFIs: https://www.mediafire.com/folder/q15n7eba5tkoc/OS\_X
​
Specs:
CPU: Ryzen 5 5600x
Mobo: ASUS ROG Strix X470-F
RAM: 16GB Corsair Vengeance 2133
GPU: ASRock RX 6700 XT OC 12GB
NVMe: Samsung 960 EVO 250GB NVMe, Samsung 980 1TB, WD Blue 2TB
​
https://preview.redd.it/qutvnfzq74yb1.jpg?width=2250&format=pjpg&auto=webp&s=252310f38c5530bea74f16bb1409826601f8a31b
​
https://preview.redd.it/5qj3brts74yb1.jpg?width=2250&format=pjpg&auto=webp&s=9dca33ac9a3591838096d425a0cb5eea68bdc7eb
https://redd.it/17msmuw
@r_hackintosh
base_nano
Uptime : 0x000033fcc1b6de0c
Sleep : 0x0000000000000000 0x0000000000000000 0x0000000000000000
Wake : 0x0000000000000000 0x000000099e7293d4 0x0000000000000000
Zone info:
Foreign : 0xffffff800d04f000 - 0xffffff800d05c000
Native : 0xffffff803f10e000 - 0xffffffa03f10e000
Readonly : 0xffffff850bdda000 - 0xffffff86a576e000
Metadata : 0xffffffe30e6b9000 - 0xffffffe32e9da000
Bitmaps : 0xffffffe32e9da000 - 0xffffffe33a9da000
​
https://redd.it/17m2uc6
@r_hackintosh
Getac computers?
I’m looking at the company Getac that makes rugged computers, and they run windows. I found one on eBay that doesn’t have an OS, hard drive, caddy, etc etc. what are my odds of getting macOS X into it? I’m not going to be able to get a Getac unless I’m able to get macOS onto it.
https://redd.it/17m5j7p
@r_hackintosh
Getting macOS running alongside Windows.
Hello, my setup is
i5-9600K
RTX 2060 Super
16GB CL15 3000MHz RAM.
storage and whatnot arbitrary.
Main windows
Is it possible for me to partition part of my NTFS drive as blank and then install macOS onto it?
Without messing up my windows installation to start
Forgot to note I have a GTX 1060 lying around.
My SSD is PCIe gen 4 but board only allows for Gen 3.
https://redd.it/17moewk
@r_hackintosh
Can i run a Hackintosh VM on my homelab and stream it to my pc ?
I dont really know how to phrase this question. So i have to a bit afield to explain it.
I know that i can run e.g. home assistant on my server and then from my desktop pc i just go into the browser and have the whole interface of Home Assistant and can work on it from there.
Is something like this possible with a VM of MacOS ? So that i run it on my server but use it from my Desktop PC ?
https://redd.it/17ml26s
@r_hackintosh
Success update ryzentosh to Ventura
https://redd.it/17nf4kp
@r_hackintosh
SOLVED OTA update to Sonoma 14.1 was a success.
This is a follow up for this post: https://www.reddit.com/r/hackintosh/comments/17m9dro/update\_for\_sonoma\_141\_doesnt\_show\_up/
In sum, after building this hack the update for 14.1 didn't show up.
User u/schrup21 suggested to add this boot argument: revpatch=sbvmm, and it worked, update showed up.
The motivation for this post is that some users commented asking if updating this way works.
The answer is that it does. It rebooted the system several times but it works fine.
Sonoma 14.1 is now running without any issues whatsoever on my hack.
​
https://preview.redd.it/pndkm6mlc9yb1.png?width=827&format=png&auto=webp&s=4d758728e3a3da46e705250b47c7ec7b6e95f724
https://redd.it/17ndtcy
@r_hackintosh
Harmonizing the Future: AI, Music, and Crypto Revolution
https://youtu.be/rb_G2O-PEM4?si=HTujWm7ZPnEeC7C2
https://redd.it/17m7mn5
@r_hackintosh
Help me with hackintosh pls
Hello, i don't know what's wrong with my config. Macos is 12, my pc: RX 6750, Ryzen 5600X.
https://pastebin.com/uMJqjuen
https://pastebin.com/Y9avisuK
https://redd.it/17n51nx
@r_hackintosh
Mouse (Logitech Lift & G502) intermittent stuttering?
Hi,
I just installed macOS Sonoma 14.1 on my build (10700k, Asus Z490-Plus, iGPU for now) using the dortania OpenCore guide, everything seems to be working OK but intermittently my mouse will stutter and I can't work out why.
There doesn't seem to be any pattern as to when it happens (i.e. doesn't seem to happen at high CPU load), it'll stutter for about a minute, then be smooth for anywhere from 1-30 mins, then stutter again for a bit, etc.
As far as I can tell I've mapped the USB ports correctly using USBMap. I tested other devices in all ports and they seem stable. It happens with both my Logitech Lift and Logitech G502 Lightspeed, with and without the Logitech software, bluetooth and wireless modes. Under Windows they work fine.
I don't have a wired mouse to try with atm but I'll get one to test out if nobody has any idea what might be causing this. There's various other threads mentioning this issue with Logitech mice over the years on hackintosh but none of them seem to have a solution.
Any ideas? Thanks in advance.
https://redd.it/17n6wzr
@r_hackintosh
[SUCCESS] Lenovo Thinkpad Yoga 260
https://redd.it/17n37tx
@r_hackintosh
I need help install Mac OS on a dell latitude e7240
https://redd.it/17n16zk
@r_hackintosh
Hackintosh recognizes NVMe drive, but won't boot from it
Hey guys
I recently bought a Samsung EVO 970 NVMe drive to use as my new boot drive. I've cloned my boot drive (SATA) to the NVMe with Carbon Copy Cloner, and I've copied my EFI folder to the new drive. However, OpenCore won't recognize it in the boot options screen. I did format the new drive as APFS, GUID Partition Map.
I do not have the FixNVMe kext. I figured I do not need it as long as the drive appears to be working fine.
I'm fairly novice to hackintoshing, but I have used this computer since 2019. I should also mention I do want to update the computer pretty soon, but don't want to mess up the current configuration that's working perfectly.
​
Specs:
OpenCore 0.8.8
iMac 19,1
MacOS 11.6.2
MB: Z390 Designaire
​
https://redd.it/17myp66
@r_hackintosh
I need help
I've been following a guide how to make a config.plist file for my pc, but I'm stuck and don't know what to do, could someone guide me? CPU: Ryzen 3 3200g GPU: 1050 ti Motherboard: A320M-S2H
https://dortania.github.io/OpenCore-Install-Guide/config.plist/
https://preview.redd.it/3739jxy885yb1.png?width=752&format=png&auto=webp&s=54ca0a65922bddef1ce5a42b7993ee35f4f2acc3
https://redd.it/17mweye
@r_hackintosh
Weird HDMI Glitch on Startup
https://redd.it/17ms96m
@r_hackintosh
MacOS Monterey | Ryzen 5700G
APU - AMD Ryzen 7 5700G with Radeon Graphics
dGPU - RTX 3060 Ti
MB - Gigabyte A520M H
Memory - 32GB Netac Technology (16x16)
Network - RTL8111
Operating System - MacOS Monterey 12.7.1
Works well with NootedRed. dGPU is disabled with -wegnoegpu. I didn't have to pull out my dGPU to install the system.
Bluetooth don't work. There are drivers for my Bluetooth USB adapter only for Windows.
Adobe programs work well, without crashes. Chromium-based browsers cannot be used without enabling GPU Rasterization. Apple TV isn't working (black screen when video is turned on).
I don't have any lags, everything works fine.
Geekbench:
CPU Score - https://browser.geekbench.com/v6/cpu/3372632
OpenCL - https://browser.geekbench.com/v6/compute/1217959
​
https://preview.redd.it/cbg1wx2014yb1.png?width=851&format=png&auto=webp&s=38678c504ea9ef0842d9d87b29b83007011a0e4f
https://preview.redd.it/lts0pym114yb1.png?width=835&format=png&auto=webp&s=493443e718967d42c295143d8ecfe1517ed05d55
https://preview.redd.it/jlfhl59214yb1.png?width=835&format=png&auto=webp&s=ba954618f0da2274bbc03a0c9ae3a328bfebc5c7
https://redd.it/17ms3m1
@r_hackintosh
Hey guys, I need a little help with my build I think...
Soooo, I recently installed a 3rd M.2 ssd in my hackintosh and since my motherboard ran out of M.2 slots I used a PCIE adapter for it.
It worked fine for a few weeks (my build is about 2 years old, worked flawless before installing the last M.2 btw) but for a while now I've been having complete freezes of my system when I don't touch it long enough, which also results in Windows bugging out (dual boot) and I have to turn my PSU off for like 5min to get everything working after.
The reason at least for suspecting it's the last M.2 added via PCIE is because of the error that I get when I reboot my hackintosh, which is pasted below this.
I'd love to hear what you guys think of it, thanks in advance!
Error code:
panic(cpu 3 caller 0xffffff8009d3b836): nvme: "3rd party NVMe controller. Loss of MMIO space. Write. fBuiltIn=1 MODEL=Samsung SSD 970 EVO Plus 2TB FW=2B2QEXM7 CSTS=0xffffffff US[1\]=0x0 US[0\]=0x41 VID=0x144d DID=0xa808 CRITICAL_WARNING=0x0.\\n" u/IONVMeController.cpp:6053
Panicked task 0xffffff903efe3670: 252 threads: pid 0: kernel_task
Backtrace (CPU 3), panicked thread: 0xffffff950b0cc540, Frame : Return Address
0xffffffd03939baa0 : 0xffffff8007485ffd mach_kernel : _handle_debugger_trap + 0x41d
0xffffffd03939baf0 : 0xffffff80075e6035 mach_kernel : _kdp_i386_trap + 0x145
0xffffffd03939bb30 : 0xffffff80075d5803 mach_kernel : _kernel_trap + 0x533
0xffffffd03939bb80 : 0xffffff8007425a60 mach_kernel : _return_from_trap + 0xe0
0xffffffd03939bba0 : 0xffffff80074863cd mach_kernel : _DebuggerTrapWithState + 0xad
0xffffffd03939bcc0 : 0xffffff8007485b86 mach_kernel : _panic_trap_to_debugger + 0x2b6
0xffffffd03939bd20 : 0xffffff8007d16409 mach_kernel : _panic + 0x54
0xffffffd03939bd90 : 0xffffff8009d3b836 com.apple.iokit.IONVMeFamily : __ZN16IONVMeController14CommandTimeoutEP16AppleNVMeRequest.cold.1
0xffffffd03939bda0 : 0xffffff8009d1eac7 com.apple.iokit.IONVMeFamily : __ZN16IONVMeController13FatalHandlingEv + 0x141
0xffffffd03939bdd0 : 0xffffff8007c5dd25 mach_kernel : __ZN18IOTimerEventSource15timeoutSignaledEPvS0_ + 0xa5
0xffffffd03939be40 : 0xffffff8007c5dc28 mach_kernel : __ZN18IOTimerEventSource17timeoutAndReleaseEPvS0_ + 0xc8
0xffffffd03939be70 : 0xffffff80074d93a5 mach_kernel : _thread_call_delayed_timer + 0x4f5
0xffffffd03939bee0 : 0xffffff80074da412 mach_kernel : _thread_call_delayed_timer + 0x1562
0xffffffd03939bfa0 : 0xffffff800742518e mach_kernel : _call_continuation + 0x2e
Kernel Extensions in backtrace:
com.apple.iokit.IONVMeFamily(2.1)[0DE31F96-AEED-31F5-84D4-4147BDC77799\]@0xffffff8009d16000->0xffffff8009d42fff
dependency: com.apple.driver.AppleMobileFileIntegrity(1.0.5)[B0319B71-F6E6-39E1-AD7C-33CE7A82BDEC\]@0xffffff8008b6c000->0xffffff8008b8dfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[897B72E0-B98F-30BA-8CB2-4E5E469CE4B6\]@0xffffff8009fe7000->0xffffff800a011fff
dependency: com.apple.iokit.IOReportFamily(47)[FCE9B54C-4E85-371D-BB93-1B9AA324711A\]@0xffffff800a023000->0xffffff800a025fff
dependency: com.apple.iokit.IOStorageFamily(2.1)[160B70B8-9236-38ED-8AC9-A215D071A76B\]@0xffffff800a128000->0xffffff800a13efff
​
Process name corresponding to current thread (0xffffff950b0cc540): kernel_task
Boot args: keepsyms=1 debug=0x100 alcid=1 agdpmod=pikera chunklist-security-epoch=0 -chunklist-no-rev2-dev
​
Mac OS version:
21D62
​
Kernel version:
Darwin Kernel Version 21.3.0: Wed Jan 5 21:37:58 PST 2022; root:xnu-8019.80.24\~20/RELEASE_X86_64
Kernel UUID: 93729D02-FE6F-355B-BA76-BA930AA7103F
KernelCache slide: 0x0000000007200000
KernelCache base: 0xffffff8007400000
Kernel slide: 0x0000000007210000
Kernel text base: 0xffffff8007410000
__HIB text base: 0xffffff8007300000
System model name: iMac19,1 (Mac-AA95B1DDAB278B95)
System shutdown begun: NO
Panic diags file available: YES (0x0)
Hibernation exit count: 0
​
System uptime in nanoseconds: 57160674761166
Last Sleep: absolute base_tsc
Disabling the GPU
Hello, I'm a beginner in hackintosh. The question is, is it safety to disable the GPU and use only iGPU? Such a need appeared because there are problems with the offline installer and for my video card the highest possible OS is high Sierra, and as far as I know, Apple has disabled the possibility of online recovery in high Sierra. My PC: Processor: i3 8100; GPU: 1050ti; Motherboard: ASUS PRIME H310-PLUS. P.S: I use opencore
https://redd.it/17mc4fh
@r_hackintosh
Can't access iCloud after fresh install of Sonoma14.0
After using the OCLP method to get WiFi back, I decided to do a clean install as some of my work links and browsers lost functions after the OCLP hack. Install was fine, but after entering my personal data, I waspresented with " unable to communicate with server" error...so I skipped that portion and entered name and code, then tried app store. I was able to log in and also into iTunes, but iCloud was missing from internet accounts, and after againentering my personal info, I get the same message, or the verify window stays open and hangs. alled Apple support, no help. Any clues before I go back to Venture or reinstall?
https://redd.it/17mcfnt
@r_hackintosh
HUANANZHI X99 BD4 + Intel® Xeon® E5-2670 v3 + AMD Radeon™ RX 6600 + Fenvi T919
https://preview.redd.it/qpeguhbgu1yb1.png?width=1920&format=png&auto=webp&s=a461a89e825a164fe1a8b94d77441ac2fd60d97d
Latest working macOS: 14.1.0Current OpenCore: 0.9.5
## Complete hardware specs
Intel® Xeon® E5-2670 v3 (All cores activated)
HUANANZHI X99 BD4 + Unlock Turbo Boost + Resizable Bar Activated
AMD Radeon™ RX 6600
2x 16Gb DDR4 3200Mhz ECC Atermiter
Wifi/BT replaced by Fenvi T919
## What works
macOS Sonoma, Ventura, Big Sur, Catalina and macOS Monterey
Audio
HDMI/DP (in dGPU - Works OOB)
All USB ports
Everything iCloud related (Drive, iMessage, Facetime, unlock with Apple Watch, etc)
Temperature monitoring for everything
DRM content (Netflix, ATV+, Airplay 2 mirroring etc)
Shutdown/Reboot/Update to newer macOS builds over time
Resizable Bar ON (ResizeUsePciRbIo = true)
## Kexts used:
AppleALC.kext
CpuTscSync.kext
FeatureUnlock.kext
Lilu.kext
RealtekRTL8111.kext
RestrictEvents.kext
SMCSuperIO.kext
SMCProcessor.kext
USBMap.kext
VirtualSMC.kext
WhateverGreen.kext
XHCI-unsupported.kext
My EFI: https://github.com/vncsmnl/EFI-HUANANZHI-X99-BD4-HACKINTOSH
https://redd.it/17mlgzn
@r_hackintosh
