Fully working hackintosh on the Thinkpad X260!
https://redd.it/17kldxg
@r_hackintosh
How good would Sonoma be with these specs?
I'm thinking about doing a Hackintosh in order to finally enjoy the Apple ecosystem without having to buy a non-upgradable future eWaste that has to be replaced once Apple says "No"
I've managed to build quite a respectable PC for only 500 euros, which has:
CPU: Ryzen 5 7600X
RAM: 16GB DDR5-4800
SSD: Gigabyte B650 DS3H
GPU: PowerColor RX 5700
SSDs: Crucial P3, Samsung 980 Pro which I currently use for Linux Mint
And a 2TB HDD, along with a 500GB one. Case has three case fans installed, if that is important.
Would this hardware be capable of making a good Hackintosh, and how good would the performance in Sonoma be?
https://redd.it/17kjflh
@r_hackintosh
Problems getting igpu working
My core specs:
- i7 6700k
- rx 5600xt
- z170 pro gaming
- sonoma 14.0
- Imac 19,1 smbios
The dgpu is working but the igpu doesn show up in system information. It's skylake so I needed to spoof it's id. I need the igpu for additional display outs.
some config.plist values I have set:
- device id: 12590000
- APPL,ig-platform-id: 00001259
- frambuffer-patch-enable: 01000000
- boot-args: -v keepsyms=1 alcid=1 agdpmod=pikera unfairvga=1
entire config: https://pastebin.com/zkQQ4STR
https://redd.it/17khdf1
@r_hackintosh
Ryzentosh 14.1 Sonoma dualboot
https://redd.it/17kfjf4
@r_hackintosh
How good will macOS Sonoma hackintosh be on this hardware, if possible to be installed on it?
https://redd.it/17k7mj1
@r_hackintosh
macOS Ventura running sluggishly slow
Intel i5 8th gen (Coffee Lake)
Intel UHD 620 graphics
16gb ram
Thinkpad E480
MacOS does boot but it runs slow, in system info the GPU does show up as 2048MB
I had Ventura on this same laptop but I installed an SD card kext and my system kernel panicked so I had to re-install macOS, used genSMBIOS to get MacBookPro16,4 serial number and rom and all that stuff.
My trackpad, brightness and WiFi don't also work despite using the same EFI folder and the kexts.
I've hit a roadblock and do not know what to do from here.
Edit - I downloaded Ventura 13.6 and the previous attempt was Ventura 13.1. Do you all think I should switch back to 13.1 and see if it makes a difference?
https://redd.it/17k14qo
@r_hackintosh
JMicron JMB362 eSATA Support on Monterey Possible?
Hi.
I remember having my JMicron JMB362 chipset eSATA port working on a version of macOS, but it's been so long that I can't even remember when that was.
Trying to use an eSATA enclosure for some stuff here as my Renesas USB3 ports are unsupported on this old Intel P67 mobo in Monterey as well.
I've tested (individually):
CtlnaAHCIPort.kext
SATA\_Unsupported.kext
AHCI_3rdParty_SATA.kext
AHCI\_3rdParty\_eSATA.kext
using kext folder in OpenCore + adding to config.plist to inject on boot.
macOS Monterey boots fine, no opencore errors, but I see no indication of the kext loading or initialization of the JMB device so I can only assume the kext isn't compatible, as per hackintool's extension output not showing anything.
Can this be accomplished by extracting the values from the AHCI_3rdParty_eSATA.kext for the specific model and transposing some of the values to mimic the plist structure in the SATA_Unsupported.kext or is this due to a lack of drivers that are bundled with Monterey no longer supporting the JMicron chipsets?
Here are the two plist contents:
AHCI_3rdParty_SATA.kext [https://i.imgur.com/VnMRzET.png](https://i.imgur.com/VnMRzET.png)
SATA\_Unsupported.kext https://i.imgur.com/KEV1FWY.png
does anyone have experience with these types of modifications or if it's possible in this instance?
I do see the JMB controller in the PCI device list in hackintosh as well.
https://redd.it/17k2qfz
@r_hackintosh
Ethical Hacking: Harnessing OSINT and AI for Cybersecurity
https://youtu.be/pA7JdEEN_y8?si=q19cc4OJykNzIdWb
https://redd.it/17jyeg2
@r_hackintosh
macOS 10.13 High Sierra doesn't boot. Shows some text and doesn't do anything after that
I didn't take a picture of the text, but it's pretty much all (and even a bit more) inside the liked zip alongside of the EFI folder.
My specs are:
Laptop model: Asus X200CA Touchscreen model
CPU: Core i3-3217U
Chipset: MH70
GPU: Intel HD 4000
VRAM: 256MB allocated from RAM in UEFI settings
RAM: 4GB
Guide: https://dortania.github.io/OpenCore-Install-Guide/ for Ivy Bridge
​
EFI and Log: https://drive.google.com/file/d/1cLCxj\_uy2frb51lhikRmaOhc8z--kGBl/view?usp=sharing
https://redd.it/17jxffc
@r_hackintosh
Radeon 6650 XT Temperature
i bought 6650xt and spoofed successful and working good. after installing Radeon gadget (gpu temperature monitoring software) i see 50° idle temperature and when rendering in blender it kicks 100°.i got doubt and installed windows as dual boot and checked that i got 45° idle temperature and 75° temperature on blender rendering. is it normal ? And i run Sonoma 14.
My Mechine:
CPU : 13500
GPU : rx 6650 xt
MOTHERBOARD : asus prime z790
WIFI :Fenvi t919
SSD : wd 850xt
thanks in advance
https://redd.it/17jtv5j
@r_hackintosh
help with a HD630 using hdmi port for 4K resolution
Gurus
I'm currently running my i7-7700k iGPU HD630, it's doing 2K, but I'm not able to push it to 4K via HDMI which is a resolution that it supports
Can anyone offer any assistance please
config.plist
https://redd.it/17jqyal
@r_hackintosh
Intel wifi/BT
Have a intel 9560NGW card and its dont work 100% in Sonoma. Someone have a solution for this ?
https://redd.it/17jar3t
@r_hackintosh
No HDMI output on my MateBook (Sonoma)
No HDMI output on my MateBook D15, igpu Intel UHD 630.Help please ;)
https://redd.it/17jc0mf
@r_hackintosh
is hackintosh works rx7600?
i have rx 7600 and ryzen 5 5500. Can i use hackintosh?
https://redd.it/17jfyhn
@r_hackintosh
Need help with setting up dual monitors
I have laptop dell latitude 5501 which one is running Ventura just fine and have wd22tb4 which works fine on windows 11 but no video out at all in Ventura, 2 dell monitors connected to this dock. USB ports on dock working on Ventura...
https://redd.it/17jlfcr
@r_hackintosh
Synchronization with iCloud paused - Photos
Hey there!
So far I am very happy with my Hackintosh.
I got through the guide well and was able to sort out all the major problems.Unfortunately, there remains one problem that I can't quite explain.In the Photos app, the sync with iCloud is always paused due to "Bad network connection".
I currently still have an Intel Wifi card with the appropriate kexts installed but would probably soon switch to a supported Broadcom for AirDrop and co.
However, it would be cool to be able to solve the problem first - are there perhaps settings for the config.plist?I haven't found a native solution yet to tell macOS to ignore this, so currently I can only continue syncing for an hour at a time....
Anybody knows anything about it?
PC Stats:
* Intel Core i5 13400F
* AMD Radeon RX 6800 XT
* 32 GB Kingston Fury DDR5-4800
* 2x 1 TB WD Blue (1x Windows, 1x MacOS)
* Gigabyte B760I AORUS Pro DDR5
https://redd.it/17kkvcu
@r_hackintosh
Laptop LCD extremely dim when booting
Intel i5 8th Gen (Coffee Lake)
Intel UHD 620 Graphics
16gb ram
I used Dortania to set up the EFI.
Everything works during booting, but on the installation screen (where you see disk utility) my laptop LCD just becomes extremely dim.
I have added the following to my boot args (-v keepsyms=1 debug=0x100 alcid=1 -igfxblr igfxonln=1 enable-backlight-registers-fix) and I have also put the ACPI SSDT-PNLF.aml.
Is there any kexts I should install at this current moment?
I also don't think trackpad and keyboard works as nothing seems to be happening when I use both (using a USB mouse and keyboard, I can see changes)
Any help would be appreciated thanks!
https://redd.it/17kiap9
@r_hackintosh
Triple Boot Hackintosh (Win10 pro + Ventura + Sonoma) in 10-years old Sony VAIO SVP13213CWS
​
https://preview.redd.it/wkdz26a6cixb1.jpg?width=1920&format=pjpg&auto=webp&s=adc6d2a85f6feb16d3110224c7b2fdb25d607537
EDID for Built-in Screen:
AAPL00,override-no-connect
| AAPL00,override-no-connect | Data | 00FFFFFFFFFFFF0034A9A29600000000FF170104A51D1178029521A6535398250B505400000001010101010101010101010101010101023A805871380D402C06920058C11000001E023A8058713830422C06920058C11000001E000000FD00263E40430F010A202020202020000000FC005656583133463030394730300A000A |
​
Triple Boot: Win10 pro, Ventura, Sonoma
Sony SVP13213CWS
Intel® Core™ i5-4200U
Intel® HD Graphics 4400
Intel(R) Dual Band Wireless-N 7260
Intel Intel(R) Wireless Bluetooth(R) 4.0 + HS Adapter
Realtek Realtek High Definition Audio (ALC286/ALCID=11) with
Intel(R) Intel(R) Display Audio
Touch Screen: eGalaxTouch exc7910-1031
BIOS: AMI's Aptio firmware R0280V7
Everything works fine exceptWhat does not work:
1. Internal Mic doesn't work. Have to take use of Headphone Mic (Line-in Mic) instead.
2. Need to install "UPPD Touch Software" for Touch Screen. (Single touch only.)
3. MacOS HiDPI. (I couldn't have both external HDMI & build-in screen/ eDP-connectivity work normally .)
​
While external HDMI screen's working
​
While Internal-screen's working fine.
​
https://redd.it/17kgxwr
@r_hackintosh
EFI
I have learnt the hard way that prebuilt EFI's lead to all sort of problems, knowing this I followed Dortania's guide for my CPU and GPU taking note of all the important information. My EFI does not even work now and actually works worse than before. Could I upload my EFI here and get some help with it as this is my first time making an EFI?
https://redd.it/17kfi4g
@r_hackintosh
OMEN 25L Desktop GT11 (11th Gen Intel) RocketLake graphics issue
Hi all!
I have recently attempted installing macOS Monterey on my HP OMEN 25L Desktop PC and I'm running into some issues related to rendering and/or graphics.
The issue is, the top third of the screen flickers and behaves very strange. The middle portion of the screen seems to work fine, and the bottom third of the screen acts as a mirror to the top half (meaning I can't use the bottom third of the screen at all).
Hackintool doesn't appear to support RocketLake and every other EFI folder that I have found so far has not allowed the computer to start at all. I'm new to hackintosh and I'm mainly experimenting right now but I would greatly appreciate anyone pointing me in the right direction.
Picture:
https://preview.redd.it/8h2hch5lbfxb1.jpg?width=3024&format=pjpg&auto=webp&s=5d749e156ac334585b0e29476f1caa8d89385740
https://redd.it/17k6wiv
@r_hackintosh
Intel AC7265 Wi-Fi sonoma
Are there any documents for getting the AC7265 to work on sonoma I saw a video on YouTube from technolli would said he got it working but no instructions on how to not bothered about Bluetooth just Wi-Fi
https://redd.it/17k41en
@r_hackintosh
Dell Latitude 3500 - Mac OS Ventura 13.6.1
​
Dell Latitude 3500, using OpenCore 0.9.5
Managed to install Mac OS Ventura on this laptop!
Weirdly enough, I've seen nobody hackintosh this specific laptop at all.
Everything works great, with only a few things not working.
Hardware:
Model: Dell Latitude 3500
BIOS Version: 1.29.0
CPU: Intel Core i5-8265U (8th Gen, Whiskey Lake)
GPU: Intel UHD Graphics 620
RAM: 16GB (2x8GB) 2400 MHz DDR4
Audio Codec: Realtek ALC236
Wifi card: Intel AX200 (No Bluetooth card)
Ethernet Card: RTL8111/8168/8411 PCI Express (Gigabit Ethernet)
Resolution: 1366x768
Bootloader: OpenCore 0.9.5
What's Working:
Graphics Acceleration, Audio & Audio jack, Wifi, Ethernet, iServices, USB Type A and C, SD Card reader, Camera, Microphone, Keyboard, Backlight, Practically Everything
What's not working:
Trackpad gestures and HDMI output, DRM (Can't be fixed)
https://redd.it/17k1hp2
@r_hackintosh
Help for Sonoma update from Ventura
Greetings,
I have a perfectly working Ventura hackintosh, a Lenovo ThinkBook 15-IML laptop which I've been using for a while. Here are the specs:
`-I3 1011U 10th Gen`
`-Intel UHD 620`
`-8GB RAM DDR4`
`-240GB SSD Crucial`
When I try to update it to Sonoma with the USB no matter how many attempts I do, I always get an error (In memory panic stackshot succeeded) or a prohibited sign. I guess it has something to do with the SMB info (I'm running a MacBookPro16,3 for instance).
I'll provide the EFI folder, can anybody tell me what's wrong with it?
​
* EFI: [https://drive.google.com/drive/folders/1OlJG6MfeyQsdr2gNAJVWS3Jqju8CbEL3?usp=sharing](https://drive.google.com/drive/folders/1OlJG6MfeyQsdr2gNAJVWS3Jqju8CbEL3?usp=sharing)
Thanks in advance,
Dennis.
https://redd.it/17jywd0
@r_hackintosh
Updated Guide to Create macOS Bootable USB Drive with gibmacOS + Manage Corrupted Downloads
https://kextcache.com/guide-to-create-a-bootable-macos-usb-drive-using-gibmacos-tool/
https://redd.it/17jvboq
@r_hackintosh
Kernel panic on Thinkpad L460 on Mac OS Ventura
https://redd.it/17ja6bj
@r_hackintosh
Sonoma 14.1 - Update
Update on the [build](https://www.reddit.com/r/hackintosh/comments/17bpjd2/sonoma_with_msi_pro_b660ma_ddr4_wifi_i512400f/)
Things I did to update:
* Download update using system settings
* Disabled secure boot in plist
* Removed the SSDT for disabling 3060ti (To enable it since new update will remove my Kepler drivers of G710 and I will loose the display)
* Restart to BIOS and disabled Secure Boot
* Restart to MacOS and let it update
* Once booted reinstall Kepler drivers using OpenCore patcher
* Enabled secure boot and add back SSDT to disable other GPU in plist
* Restart to BIOS and enable Secure Boot
* Reboot and Done.
​
[Sonoma 14.1](https://preview.redd.it/dtqzby8tnbxb1.png?width=2560&format=png&auto=webp&s=b7f2872111deee23d9a7b9a672debfa399d6475e)
​
https://redd.it/17jqvnr
@r_hackintosh
Hackintosh Sonoma with gt730
https://redd.it/17jp9ls
@r_hackintosh
opencore "failed to load configuration" error after installing windows
I had MacOS Catalina successfully installed with OpenCore 0.9.3. After installing Windows 10 on a separate SSD, I get the "failed to load configuration" error, but only on the first boot attempt.
After I get the error, I hit reset and am presented with the bootpicker and everything works as normal with both OSs. It's mostly just annoying to have to hit reset once every time I boot, but I'd like to correct this if anyone has any insight.
Specs: i7-3770k, GA-z77n-WiFi, RX 580...
https://redd.it/17jfvn7
@r_hackintosh
Does intel uhd will work
Does intel uhd will work? Bc i saw in the guide that there is no driver for uhd cards
https://redd.it/17jm0h0
@r_hackintosh
Help to install in HP
Hi, i need help to install almost any version of macos in Hp 15-bs020la.
I tried 3 times with different instalation files but none worked for me, is there something i could do for this specific laptop?
https://redd.it/17jfyx6
@r_hackintosh
