(ASRock OC Formula) RX 6900 XT (XTXH) Black screen until macOS - Any ideas?
Hello everyone, I just upgraded my trusty RX 580 to a nice deal 6900xtx(h), the ASRock OC Formula.
Of course because of it being an XTXH model, I had to add SSDT-BRG0, and spoof my device-id to a regular 6900xtx.
All of that went fine, the machine works, accelerates, and is otherwise normal. However, I was curious if there was any way to preserve the boot process. As it stands, the machine loads till a certain point past the apple logo, then drops all displays. It doesn't restore the image until a good few seconds past macOS loading in completely, my guess is this is standard for a "non-supported" gpu, the driver needs to load completely before displays can be re-initialized. This could be a pain for diagnostics or just general presentation, but isn't critical to fix.
I'm running macOS Sonoma 14.0
10900k
MSI MPG Z490 Gaming Carbon Wifi
64GB 3600Mhz DDR4 Patriot Viper Steel
and obviously -- ASRock OC Formula RX 6900 XT
If anyone has had success in preserving or restoring "native boot" screen support with an XTXH model, how did you do it? Did you rely on a flash instead of a spoof? or is there something that can be done that I'm not seeing?
Also if you guys need any more information on my hack, let me know. Don't want to clutter this with unnecessary info.
Thanks!
https://redd.it/17abken
@r_hackintosh
Hackintosh a Dell Laptop
Hello, i'm a mobile developer, and the company where i work sent me a Dell Inspiron 15 3520. (Device page on Dell Website). And i want to know if is possible install a Hackintosh on this device.
https://redd.it/17a5uvv
@r_hackintosh
Sonoma on a HP Probook 450 G4 (I3-7100)
https://redd.it/17a40r8
@r_hackintosh
Graphics problem
After installing macos ventura
The graphics are laggy and the video is not working too, all my kext are there and boot-args have all values in it.
Secondly, my Bluetooth and wifi isn’t working too ,
The kext are there but no network is showing in wifi also no audio
Specs: i5 8th gen latitude 5490
8/256, intel uhd 620 graphics
https://redd.it/17a35hn
@r_hackintosh
Qemu macOS gpu pass-through suddenly stops working
https://redd.it/17a129d
@r_hackintosh
Random Restarts - no specific reason - not always the same cause.
https://redd.it/179gk63
@r_hackintosh
Vda decoding failed igpu headless ventura
Ventura 13.6 igpu as headless not working for vda decoding h264 video decoding issue on videoproc
Using imac 19,1 smbios.
Dgpu is kepler
Specs :
Motherboard: z490 p asus
Cpu i5 10400 cometlake Igpu uhd630
dgpu gt730 4gb kepler
MACOS ventura 13.6
https://redd.it/179vwfv
@r_hackintosh
Trying to install MacOS on Lenovo IdeaPad 3 15ABA7
https://redd.it/179on9r
@r_hackintosh
Installing High Sierra on an Alienware Alpha r2
I have an extra m.2 nvme ssd and I wanted to put a compatible Mac OS on it:
Specs:
Nvidia Gtx 960
Intel i7 6… at 2.something ghz
Skylake motherboard
Step one:
I researched to find that High Sierra 10.13.6 was my best best for graphics card and cpu compatibility
Step two:
I fully completed the Opencore usb setup process and attempted to install Mac OS
Problem:
My the running script in the start up of hakcintosh always freezes at something along the lines of “enabling legacy matcher”
I am away from pc atm, but any help is appreciated :)
https://redd.it/179soss
@r_hackintosh
Hackintoshing MSI Mag Mortar B650m question
I have this board paired with a ryzen 7900 and a RX6800xt.
My ethernet is a 2.5 gbps port, and my wireless is a Wifi6e-I-dont-know-what-chip-nor-do-I-know-what-BT-chip-I-have.
Does anyone know if my ethernet will work? What about bluetooth and wifi?
​
​
https://redd.it/179pci7
@r_hackintosh
You have a stash of EFI opencore and clover Ryzen 5 3500U laptops
You can give Efi •‿•
https://redd.it/179oztp
@r_hackintosh
Can I make something with this
I have an old laptop
With
an Intel Pentium N3700 1.60Ghz DDR3 2GB 1600Mhz RAM And Intel HD Graphics
Can I I put macOS on it and when yes Which Version
https://redd.it/179gpoj
@r_hackintosh
Reboot when n-time left in installer. (Thinkpad L14G1)
Hi, since my previous issue was partially solved, I decided to ask you guys again.
Specs are:
Intel Core i5-10210U with Intel UHD630
16GB DDR4 (probably 2666mhz)
Samsung SSD 512GB PM981a
Intel AX200 BT/WiFi
FHD 14" IPS
(Idk what else specs are necessary)
What worked in installer 100%: kb, trackpad, WiFi, screen res was fine.
Thing happens whenever I begin installing or wiping partition. Laptop just reboots at n minutes left. After checking what is size of files which were unpacked they were about under 1GB. So definitely it didn't even unpack everything before getting into reboot.
Also there are two EFIs that I've used during trial and error processing:
https://github.com/Caipe97/Hackintosh-Thinkpad-L14-Gen-1
https://github.com/soft98-top/Lenovo-ThinkPad-L14-Gen1-i7-10510u-Hackintosh (this one I've edited to include airportitlwm instead of itlwm)
I'll be greatful for any kind of help.
https://redd.it/179ikks
@r_hackintosh
Some parts of my ventura has low frame/lag/slow animations
* Ryzen 3500x
* ASUS B450m K II
* GTX 1080 TI
So I've used Open Core Legacy Patcher but it's not working that buttery smooth animations like minimizing and maximizing the window, however the videos running pretty good like youtube and video player are working good, the problem is in the animations.
​
I've used this EFI [https://github.com/mikigal/ryzen-hackintosh](https://github.com/mikigal/ryzen-hackintosh)
How do I fix that?
Thanks so much.
https://redd.it/179h87k
@r_hackintosh
Medion Akyon S4220
Hello guys I’m new to Hackintoshing
And I wanted to ask if there is any way I can make my old Medion Laptop to an Hackintosh
If needed I can send you a list of my components
Thanks for your help
https://redd.it/179e4yv
@r_hackintosh
Opencore stuck at info.plist is missing for injected kext
https://redd.it/17a5jv3
@r_hackintosh
Success ryzen and 6800xt
https://redd.it/17a6x9s
@r_hackintosh
Problems installing Mac OS High Sierra 10.13.6 on Intel i7 PC
I have an extra m.2 nvme ssd and I wanted to put a compatible Mac OS on it:
Specs:
Desktop
Nvidia Gtx 960
Intel i7 6700T @ 2.80 Ghz 4 Cores
Skylake motherboard
Step one:
I researched to find that High Sierra 10.13.6 was my best best for graphics card and cpu compatibility
Step two:
I fully completed the Opencore usb setup process and attempted to install Mac OS
Problem:
The hackintosh boot stops at “Please switch to XPC or bootstrapchecksin()
I am away from pc atm, but any help is appreciated :)
https://redd.it/17a4m65
@r_hackintosh
Rate my Thinkpad hackintosh
https://redd.it/17a10xz
@r_hackintosh
Help: ACPI error when trying to install Ventura
https://redd.it/179zom5
@r_hackintosh
Best Mac OS system for core 2 quad q8300?
Is possible install Catalina, High Sierra or newer Mac OS on core 2 quad q8300 + Gigabyte G41-mts2 + 8gb DDR3? Should I use OpenCore? Some tutorial?
Thanks.
https://redd.it/179o8do
@r_hackintosh
Proxmox VM hackintosh freezes and then reboots
Hi,
My name is Luca.
I'm having issue with my hackintosh. I'm trying to install MacOS Monterey via Proxmox.
When the VM boots up after 1-2 minutes it freezes and then reboots.
This is what the VM sees
**https://tinypic.host/image/oZ3TM**
This is what the config looks like (I set less cores and ram gigs to not overload the system)
**https://tinypic.host/image/oZhEw**
The VMs Hardware tab:
**https://tinypic.host/image/oZVWm**
Here's my system:
Motherboard: ASUS Rampage IV Formula
Processor: i7 4930K
Graphics Card: Nvidia GeForce Titan (2013)
Ram: 16 GB
Kind regards,
Luca
https://redd.it/179v02i
@r_hackintosh
macOS Sonoma Internet Recovery Install
As many of you may have noticed, Dortania’s Internet Recovery Install guide hasn’t been yet updated in terms of downloading Sonoma BaseSystem.dmg
Actually, after looking at /System/Library/CoreServices/PlatformSupport.plist I found out the board-id that supported macOS Sonoma.
Plus, I double checked on OpenCorePkg latest commits (link) and confirmed that Mac-7BA5B2D9E42DDD94 board-id works.
So using macrecovery.py script, which by default downloads the latest available images, I could download and next boot Sonoma Internet Recovery Install:python3 macrecovery.py -b Mac-7BA5B2D9E42DDD94 download
https://redd.it/179sfm9
@r_hackintosh
Restarts during Sonoma Install - MSI Pro Z790-a / 13700k / 5700 XT
I built a Hackintosh Successfully about 5 years ago using Clover. Needed a more powerful machine so I thought no problem. Using opencore now. Tried the vanilla guide and had a bunch of problems even getting to the bootloader. After a lot of troubleshooting and switching to a USB 2.0 drive I can get the bootloader up but have had trouble installing. I decided to use a prebuilt EFI from nakquada. I can at least get the installer moving along with that. Can anyone give any advice how to continue?
Using Opencore 0.9.5
This is right before it restarts.
​
​
This is about a minute before it restarts but it sits here for a bit so thought it may be relevant.
Here is my EFI: github.com/DTBson/opencore-13700k-5700xt-msi790-a
https://redd.it/179pasz
@r_hackintosh
How do you upgrade your hackintoshes without killing the computer?
I recently performed a ventura update on an OCLP-hacked MBP 2011 and it predictably killed it. I had hoped that since it was a minor update it would survive but no.
What is the proper technique to update the OS on a (non-OCLP) hackintosh?
And for an OCLP Mac, do I just download a new OS image, and run OCLP again with that new image?
​
https://redd.it/179px2o
@r_hackintosh
Lenovo M93p SFF running Monterey
The machine works almost perfectly, just needs more post-install fixes.
Running off a 1TB disk because its the only other one I have around empty, so its a little slow, but decent to use.
https://preview.redd.it/4uwf73oyaoub1.png?width=1680&format=png&auto=webp&s=37faf7827e03687891ffd51bd7e4ebc1c3761d96
https://redd.it/179npcm
@r_hackintosh
Ventura kepler vda decoding failed
Hi I updated my Monterey 12.6.5 to ventura 13.6 recently and got KEPLER GT730 (GK208) acceleration with OCLP. But I didn't got vda acceleration (it's not showing in videopeoc for h264 section. while I was going thru different og config experiments I got metal 3 I don't remember which smbios device properties I used
Anybody got KEPLER vda decoding working in ventura please tell me
How to configure headless igpu 630 cometlake z490 and my dgpu is gt730 4gb kepler
Specs :
Motherboard: z490 p asus
Cpu i5 10400 cometlake Igpu uhd630
dgpu gt730 4gb kepler
MACOS ventura 13.6
https://redd.it/179hwui
@r_hackintosh
Looking for specs for easiest build to get up and running
I have no preference on parts to DIY a new build and money isn't a huge issue, just want something that is plug and play with a known EFI, etc.
I assume motherboard (and maybe WIFI) is critical and other pieces like memory, SSD, etc. I can just pick up ones that are know to work.
Can anyone point me at a motherboard that will support a current gen i9 and a build that makes getting up and running pretty easy?
https://redd.it/179iun7
@r_hackintosh
pls help me
SO pls can you help me to get hackintosh working on my HP Laptop 14-ep0xxx pls psl pls pls
https://redd.it/179fxau
@r_hackintosh
Is it possible to get Hackintosh in this spec?
Hello, I read various opinions that for a smoothly functioning hackintosh, compatibility of components is necessary. Can you somehow confirm or deny this for me? Thanks!
Here is my specs:
CPU: intel core i7 8700
GPU: Radeon RX 5600 XT
Motherboard: Z370 TOMAHAWK (MSI 7B47)
​
Do i need some sort of special procedure or just basic ...lets say ...tutorial from youtube?
Thank you
https://redd.it/17942aq
@r_hackintosh
