USB dies after accessing the boot image on my netbook Hackintosh
I know this is a long shot but I just need to try as I have gotten a little far now. Anyways, I have a netbook that I wanted to hackintosh. Already done the gathering files and setting up config, boot menu is working fine, both trackpad and keyboard and my external keyboard is working too but when I'm accessing the 10.6.7 Installer, the USB will just not work. Like it's been disconnected to the system or smth and the setup will froze here... I downloaded the 10.6.7 image here. Here's the specs.
Intel Atom N455 | GMA 3150 | 1GB RAM | 320GB HDD
When this part pop up, the USB will not blink anymore\/
https://redd.it/175h0y2
@r_hackintosh
BCM94352HMB on Sonoma, pulling my hair out
As a last ditch effort to get wifi to work in Sonoma, I tried to disable Bluetooth kexts. On the following boot, wifi worked! I’ve tried absolutely everything up to this point, from spoofing device ID, to a SSDT that does the same. For a long time hackintool wouldn’t even show my wifi hardware under the pci tab. Now it does, but after re-enableling BT kexts, wifi stopped working again.
And now after re-disabling BT kexts, it’s still not working.
I’ve even tried to completely rebuild my EFI AND one from a GitHub project of the same hardware just by replacing my platform info.
The PC is a Lenovo M93p tiny (Haswell i5 35w part, can’t remember the exact proc. right now)
Does anybody have any hints? I’ve got the required kexts loading in the right order, ive got -lilubetaall and -amfipassbeta in the boot args, and manually reset nvram between changes. I just can’t figure out why it worked for 2 boot’s consecutively and now won’t work again.
https://redd.it/175fe9e
@r_hackintosh
MacOS Sonoma + RX6600 XT = 2 dead ports?
Just upgraded from Ventura to Sonoma and now only 2 of the 4 ports on the graphic card are working - the HDMI port and one of the three DisplayPorts. It was a 3 monitor setup when I started the upgrade and none of the hardware was touched during the process. I have done all of the obvious troubleshooting with different and cable and monitor combinations and it's definitely a case of 2 dead ports. Anyone else had any issues? Any ideas how to troubleshoot from here?
Machine is Gen 9 i9, 32Gb RAM, 1Tb SSD, AMD Radeon RX 6600 XT 8 GB
https://redd.it/175bjbz
@r_hackintosh
Can’t install disk utility on APFS
Hello I’m trying to install macos but it says it can’t install in APFS format but in the extended version!!
Is there any way I can install it in APFS Format?
https://redd.it/175a876
@r_hackintosh
Hello im new
Hi there will the latest version of Marcos run on my the laptop? It has 4gb ram 116 GB SSD Intel celleron processor it came with windows 11 btw but 8 also want it to work with the built in keyboard and trackpad support as well as my wifi card
https://redd.it/17575qc
@r_hackintosh
Bios date and time
https://redd.it/1754blw
@r_hackintosh
My final hackintosh
https://redd.it/1754gz9
@r_hackintosh
So, I was digging around the history of Hackintoshing and found out that there was a Clover Configurator. I also found out that there's one for OpenCore, but I wanted to ask, what is your opinion about it?
The title says it all. I honestly think that a GUI based app with MountEFI, ProperTree, etc., that doesn't require you to learn nothing (even if you didn't made your own ACPIs), takes away all the fun and risk there is with Hackintoshing. And Dortania's Guide is quite clear when it comes to using configurators: just don't.
But I got curious and wanted to know some experiences of people who used it, and opinions about the developers of these tools.
https://redd.it/174w0rj
@r_hackintosh
Anyone tried manual USB mapping from dortania guide?
I've gone through the steps thoroughly but still confused about getting to work USB 3 backward compatibility, the example in the guide is from Asus x299 board which shows pxsx controller and mine is z390 aorus master with only xhci controller using USBinjectall ? Any detailed info will be really appreciated!
https://redd.it/174x947
@r_hackintosh
i5 11400, GTX 970, Big Sur Hack Complete
Specs:
\- Intel Core i5-11400
\- Nvidia GeForce GTX 970
\- 16Gb DDR4 RAM
\- Gigabyte Aorus Z590 Master
\- Realtek 1220-VB
\- Aquantia 10G Ethernet
\- Intel Wi-Fi 6E AX210
\- BIOS Revision F9
​
What works:
\- Wi-FI
\- Bluetooth
\- Handoff
\- Dual Booting with Windows
\- iMessage
\- Handoff
\- All audio jacks besides the front IO jacks
\- Dual Monitors (Works when plugging second monitor in after boot)
\- Hardware Acceleration
​
Whats not working:
\- Airdrop
\- Front Panel AUX
\- Booting up with 2 monitors (Causes the display to go black)
​
Unable to test:
\- LAN (Switch broke so I have to use Wi-Fi)
\- Facetime (No webcam)
​
It took 2 days of nightmares to get here but it was worth it, it was smooth sailing for the first day then day 2 was plagued with boot errors because of a faulty ACPI which took me way too long to diagnose.
I used the Luchina Gabriel 11th Gen EFI as a base, then used OCAT to add Kexts and ACPIs I needed. I also used SSDTTime for ACPI generation.
​
https://preview.redd.it/lkyk5uc65gtb1.png?width=1920&format=png&auto=webp&s=6c7168e0f4281f32fe913c2d8567ee1984a043a3
https://redd.it/174y0p3
@r_hackintosh
Would ANY Mac os X work on this pc?
The specs are:
Intel Core 2 Quad q8200
ga-g31m-s2c Motherboard
4 gb Kingston ram (2x 2gb stick)
Gt 710 (the motherboard also has a built in gpu)
160Gb hdd
I additionally have a spare intel Pentium e5200 cpu
Would ANY Mac OS X version run on this at all, i dont need the latest mac os, and i do not need to run advanced programs. I am ok with the install taking a longer ammount of time.
https://redd.it/174sse1
@r_hackintosh
Update from Ventura to Sonoma
I’m on the latest opencore and Ventura and I want to do the upgrade. My SMBIOS is iMac 18,1. Which is no longer supported. My specs are Kaby Lake i5 7400, 32gb RAM 2400mhz, B250h motherboard, rx 570 8GB. Do I just changed the SMBIOS? Which version? I’ve already downloaded Sonoma and made a bootable USB already. Just don’t want to dive in and lose something that ain’t broke.
https://redd.it/174s0bs
@r_hackintosh
ventura to sonoma update no sound
on ventura 13.6 sound works but
after sonoma update
acer aspire 317-51g has no sound
device recognized..
https://redd.it/174oj6e
@r_hackintosh
Hackintosh stuck on boot
Hey, I've tried building my first hackintosh everything was fine up to the point where the installation got stuck I was following along this video https://www.youtube.com/watch?v=ehuaKpVLwhw and had the exact same software like this guy did and I booted it from Sandisk Cruzer blade 32gb 2.0
My PC spec:
GPU: RTX 3070Ti
CPU: Ryzen 5 5600X
RAM: 16GB 4400MHZ patriot viper
MOBO: Asus TUF Gaming B550-plus
and here's the SS of an error:
​
https://preview.redd.it/0o3vmf25rdtb1.jpg?width=4032&format=pjpg&auto=webp&s=7162742bcc4ceb058df2176459f8a90d46c626ed
What could possibly go wrong?
​
https://redd.it/174lw0s
@r_hackintosh
Trackpad not working
Help me guys my trackpad isn’t working I have done everything Voodoos kext, Rehab’s Voodoo’s
I2C voodoo’s and what not my trackpad still not working please someone help me!
Spec:
Dell latitude 5490
i5 8th gen
8/256
UHD 620 Intel
https://redd.it/174k1rx
@r_hackintosh
Mac Intel 2,3GHz MacBook Pro9,1 with Intel HD 4000 & NVidia GT650M Patch Failure Error 31 on Sonoma
I've revived my Mac Intel 2,3GHz MacBook Pro9,1 with Intel HD 4000 & NVidia GT650M and was able to make a full install with OpenCore 1.0.1 to Sonoma. First tried the upgrade with no success because of NVidia driver errors that would not let me patch them always giving me the error 31 after trying to rebuild the Kernel Cache.
Tried to make a full HD format and install from root, this time everything when smoothly and the NVidia drivers from the OpenCore 1.0.1 worked flawlessly and everything is working smoothly, did a root patch and no errors this time and the machine holds up good to Sonoma with so far no visible problems, even the external video port works flawlessly.
Then I proceeded to Migration Assistant in order to bring my files back in, all good also with no problems and everything working good.
But then when I go and check the Root Patching to see if anything was missing I have the OK message saying all applicable patches are already installed, perfect. The machine is working fine, Thank you guys for everything got my machine back working again.
My question is about this Patch Failure error 31.
I wanted to remove the Boot Picker from the loading system so it will not show up every time I need to reboot the machine, so I unchecked the Show OpenCore Boot Picker and performed a root patch again to applied it but this time I can no longer patch it since it gives me the error (31) again making it impossible to re-patch. Could this have to do with the Migration Assistant that brought over the old NVidia drivers and now is causing the problem or what could be the cause of this or how to permanently fix it?
If I reboot the machine it works perfectly with the OpenCore 1.0.1 drivers and everything looks fine, the only problem is that I can no longer re-patch it in case it's needed for future upgrades of OpenCore.
Anyone in the same situation or any tips on this? Thank you all for the excellent work on this project, my mac is back alive again.
Here are the screenshots for the error (31)
​
https://preview.redd.it/694tng0k3ltb1.png?width=394&format=png&auto=webp&s=87dae5a6331b8ce54e8faba67e414175e37fe3b7
https://preview.redd.it/iq7n8i0k3ltb1.png?width=391&format=png&auto=webp&s=b2f65a33e58b0a564671a18b1ba0cc2dd83eabcc
https://preview.redd.it/t5w9oj0k3ltb1.png?width=395&format=png&auto=webp&s=562773be57e9fcf0e187351a632e389140693259
https://redd.it/175fltc
@r_hackintosh
Kepler GPU patch for Monterey
Has anyone tried the Kepler enabler patch on a Monterey 12.7 ( 21G816) system?
I recently upgraded my Big Sur desktop to Monterey succesfully, and now I would like to update my Haswell Laptop with K4100 to Monterey to keep the os's in sync, but all I see is 12.5.x guides.
curious to know if anything has changed or if there is no support for it on newer Monterey versions.
https://redd.it/175dkaq
@r_hackintosh
Keyboard & ScreenTouch not working, its Lenovo ideapad C340, i5 10210u model.
hello guys, this help is regarding Keyboard & ScreenTouch issue, its Lenovo ideapad C340, i5 10210u model, working everything except this two things.
as far i know the its PS2 touchpad and keyboard and WAACOM HID is the device for my screen touch, can anyone figure it out?
please help.
https://redd.it/175bk94
@r_hackintosh
Intel HD Graphics 620 7 mb
hello,
i have recently succesfully installed mac os ventura on a laptop with an intel i7 8565U and intel hd 620 it succesfully boots but he graphics dont work correctly i have followed the https://dortania.github.io/OpenCore-Install-Guide/config-laptop.plist/coffee-lake.html guide and im using an MacBookPro15,1 as SMBIOS however i get a 7 mb display vram this is the current device propperties i hope you can help me
kind regards,
https://preview.redd.it/gfgwcn9mfjtb1.png?width=1450&format=png&auto=webp&s=085aa0357a79d2fa3a4b0629ec028f13f46cd5a5
https://preview.redd.it/qbz5ebjgfjtb1.png?width=1343&format=png&auto=webp&s=f69f6cc588c2d08a690e39e1b18fcba61602c976
https://redd.it/1759hat
@r_hackintosh
NVME Drives not showing up in boot installer Monterey
Hi everyone, i'm new in the community of Hackintosh so please do not be angry x)
I'm trying to hackintosh a MPG B550 Gaming plus MOBO, Ryzen 7 5800X + RX 6950XT with Nvme M.2 drives : Samsung 980 EVO, Crucial P5 Plus. Both 1To and a Intel 760p m.2. I managed to install macOS Monterey on the pendrive, the boot work perfectly ( With some AppleACPI 240s but wdc for now ). When i open DiskUtilies on MacOS Installer, there is only my pendrive but not my Nvme drives.
What i tried :ResetNvram.efiNVMeFix.kextNvmExpressDxe.efiSata-Unsupported.kext
Use the terminal for : diskutil list ( but nothing except pendrive )
Thanks in advance guys !
​
https://redd.it/1757ihj
@r_hackintosh
Hack has long boot times
Hi guys. When I boot up my hack, after the OpenCore picker screen and I select macOS, the next screen is where a bunch of text gets streamed and displayed and after that screen finishes displaying text, my hack goes black for a long time until eventually I get to the login screen. I have 2 hacks, both of which have the same motherboard, same GPU, and almost the same CPU. Hack 1 has a 10900k and hack 2 has a 10700k. Hack 1 is working perfectly. Because of this, I used the EFI from hack 1 and just changed the smbios to the correct one for that CPU. Any idea as to why hack 2 has the problem above? I've been stuck on this for a while, any help would be greatly appreciated.
I can upload the EFI's if necessary
https://redd.it/1755a4k
@r_hackintosh
Should I get a Broadcom Wireless card? Or I'll be fine with Itwlm and Airportitlwm?
Even though I can't make use of continuity (I don't have other Apple products), having to either secure boot to use WiFi; or not being able to connect throughout the WiFi menu, or being able to use location services seems a bit rough. But, as a beginner, I could be wrong. That's why, as the title says, I want to know from your personal experience, if what I've mentioned isn't as bad as it sounds, or if it's worth it trying to get a Broadcom card.
I have to mention that I have a ThinkPad E460 (that's why using Ethernet, although supported in my case, isn't that practical) and found out I could change the wireless card. Because of my country's situation, I'm not sure if I'll be able to get a compatible Broadcom card anytime soon. That's the main reason I'm asking and not getting the card straight away.
https://redd.it/1754hor
@r_hackintosh
security on an open core Big Sur build
I just recently used the opencore legacy patcher to install Big Sur on my 9,2 MacBook Pro
I also use etrecheck to keep on top of my machine. So I ran it after the update was finished. It’s stating major issues being “system integrity protection disabled” and “Apple security disabled”. I do understand these need to be disabled for the patch to work.
So do I need a third party malware/virus protector?
How exposed am I without these protections enabled?
Is it possible to re-enable them and stay with Big Sur?
https://redd.it/174wqiu
@r_hackintosh
Tiger lake
Will tiger lake ever be supported? I tried booting with clover one time and somehow got the prohibited symbol on my tiger lake laptop, but will it ever be supported with OC?
https://redd.it/174xk3c
@r_hackintosh
Hackintosh build
I recently had to replace a failing hard drive and have to start over. I had a working build using OSX Ventura. My system is a gigabyte aorus b450m with a amd 4600g APU. I followed a guide while ago and cannot find it for the life of me!!! Can someone please help me out and point me in the right direction.
https://redd.it/174vtda
@r_hackintosh
Lenovo Y50-70 Full Sonoma Support with OpenCore
[Lenovo Y50-70 - macOS Sonoma - OpenCore 0.9.5](https://preview.redd.it/4eak5rbwdftb1.png?width=1920&format=png&auto=webp&s=2dcfc15d9260628c02dc02323c5e9be1a391400e)
Specs:
* Intel Core i7-4710HQ
* Intel HD4600 integrated GPU
* Nvidia GTX 860M 4GB (unsupported)
* 16GB DDR4 Ram
* Broadcom BCM94352Z (Network card)
What works:
* Dual Boot with Windows
* built-in keyboard
* built-in trackpad (multi gestures)
* HDMI video/audio with hotplug
* AirPlay mirroring to AppleTV
* native WiFi & Bluetooth via BCM94352Z
* native USB3
* native audio with AppleHDA
* built-in mic
* built-in camera
* native power management
* backlight controls with smooth transitions, save/restore across restart
* accelerated graphics for HD4600 (both 1080p and 4K)
* wired Ethernet
* retina scaling
* Sleep/Wake
* Auto Brightness Sensors
* iMessage & Facetime
* Brightness keys on keyboard
Not working (yet):
* Internal speakers (Headphones work tho)
​
**For any questions, do not hesitate to contact me. I will help you with everything <3**
https://redd.it/174tkvv
@r_hackintosh
My “MacBook” can’t do nun
A lot of things don’t work read this:
For me:
Wifi doesn’t work
Bluetooth doesn’t
HDMI sort of
Audio doesn’t
Aux doesn’t
Mic doesn’t also no usb mic
Glitched graphics every 15 minutes
Most iservices work but some dont
Ethernet works s———l———o———w
Specs: Intel i3 5005u Intel HD 5500 integrated
Ram 8gb 18-‘- mhz
MacOS: Monterey
Worst ssd ever: Sandisk 128gb M.2
laptop type: HP Notebook
Mysterious laptop series: Idk
Laptop year: 2018
https://redd.it/174pu80
@r_hackintosh
Whatevergreen problem (vertical lines) (Sonoma)
I'm trying to start Sonoma on DELL XPS 13 9350 (i5-6200u, 8GB RAM, NVMe M.2 256GB) but getting this when trying to start already installed OS (I have updated from macOS 12 with the safe mode argument), I can't boot up the installer. Ask, if you need more information, I really hope someone had this in previous and he can help me.
https://preview.redd.it/i2cmlbubrdtb1.jpg?width=1280&format=pjpg&auto=webp&s=a45048e4ee2342c470680f769b9b751c06af0515
https://redd.it/174luy4
@r_hackintosh
Using NVIDIA GeForce GTX 1060 3GB on hackintosh
Hello, I have followed the guide to enable NVIDIA graphics in the config.plist. However when clicked install root patch in opencore legacy patcher, it shows no patches required, instead of NVIDIA Kepler. I am on Ventura 13.6, thank you!
https://redd.it/174kzxa
@r_hackintosh
migtablemaxdispl = 73 error on boot
Hello, I am trying to install MacOS 10.6 Snow Leopard on an older Sandy Bridge Laptop (i3-2310m), I have followed the dortania OpenCore Guide and set it up for BIOS boot, but when I boot the system gets as far as showing a line of text that says mig\table_max_displ = 73, then it just stops. I am a beginner when it comes to hackintoshing, all help would be appreciated!
Specs: Toshiba Satellite C655-S5212
CPU: Intel i3-2310m
GPU: Intel HD Graphics 3000
HDD: 320GB
​
https://redd.it/17448hb
@r_hackintosh
