Does anyone Know how to fix this?
https://redd.it/16zfofo
@r_hackintosh
HP Omen 15 DC1008ua on Sonoma 14.0 with fully functioning Broadcom 94360CS2.
https://redd.it/16zau9f
@r_hackintosh
Fenvi NGFF card to USB ?
If I connect a supported ngff Broadcom wifi/bt card to this ngff/pcie adapter:
https://www.amazon.com/dp/B09VB9ZCJR/?tag=tonymacx86com-20
And then put into a mini pci-e to usb like this?
https://www.amazon.com/dp/B08GFM9536/?tag=tonymacx86com-20
I am wondering if this Setup could work and enable native airdrop support for the hackintosh?
https://redd.it/16zayxs
@r_hackintosh
OC failed configuration
Hello guys I am installing Hackintosh for the very first time, and this OC failed configuration occurs when I start booting it
My config.plist file is indeed EFI/OC I don't know where I did wrong
please help me guys!
​
​
my specs:
​
Dell latitude 5490
i5 8th Gen 8/256
intel graphic uhd 520
https://redd.it/16z856a
@r_hackintosh
Strange and weird Problem i’ve ever had
https://redd.it/16z4w8j
@r_hackintosh
There's no option for me to install Mac os 11.1
https://redd.it/16z2lsl
@r_hackintosh
IT WORKS FINALLY!!!
https://redd.it/16yxycq
@r_hackintosh
RX 5500 XT not working in Sonoma 14.0
hello. Today I've upgraded my GPU from NVIDIA GTX 970 to Radeon RX 5500 XT. I checked this card on official AMD GPU Buyers Guide from OpenCore, and it said that this card is supported up to latest version. So, I connected GPU to PCI Express slot, added agdpmod=pikera boot arg, resetted NVRAM. But the card isn't working at all.
​
Please just don't say to me that this card this unsupported. Please.
This Mac... window
This Mac... window shows only "7MB Display", and not RX 5500 XT as it should. Please help me. Maybe I'm missing something?
​
Screenshot from AMD GPU Buyers Guide \(RX 5500 XT is here!\)
​
System info
On above screenshot, I have 2 cards, because I haven't disconnected NVIDIA GPU. I tried previously, this doesn't change anything.
btw, it says that no kext is loaded for this GPU. looks like it's unsupported. but please, no.
I'm using Sapphire Pulse version.
https://redd.it/16yvuik
@r_hackintosh
Bluetooth not working in macOS Ventura 13.6
Hello Hackintosher's. i'am new to the Hackintosh world and installed macOS Ventura 13.6 on my LifeBook E556 with a Intel Core i5 6200U and Intel HD Graphics 520.
After the install there were not Wifi Kexts and I put the OpenIntelWifi Kexts into the Kext folder and the Wifi finally began to work. I set up my ID and all that Stuff but Bluetooth, AirDrop and Handoff are not working. even after Putting the Kext into the Kext folder that were for the Bluetooth Kext Files and after a restart Bluetooth, AirDrop and HandOff are still not working. it would be nice if someone could help me. 😁
https://redd.it/16yt8fi
@r_hackintosh
Does ASUS USB-BT400 work with sonoma?
I have my hackintosh working pretty well currently and just missing bluetooth so wondering if the ASUS USB-BT400 works on sonoma. I'm on ventura at the moment but do plan to upgrade soon.
https://redd.it/16ypm9a
@r_hackintosh
Hackintosh on Ryzen 3500U
Hey i finally installed hackintosh on my Ryzen 5 3500U, So far i able to install Sonoma too, but the xcode sucks with latest iOS 17, nothing boots and compiles
Laptop Model: HP 14s-dk0501AU
RAM: 8GB
CPU: AMD Ryzen 5 3500U
GPU: Vega 8
https://preview.redd.it/pdz2isyhqxrb1.png?width=1920&format=png&auto=webp&s=16336fa39946459d3fb346b024c7db5edbd15160
Just for Xcode and minor programming
Everything works Except Wifi (cuz Realtek) & Unable to detect my Internal HDDif anyone knows how to do that please inform me
i tried to play various games, everything works nearly fine
Here my EFI: https://github.com/AKhilRaghav0/ryzentosh\_3500u
​
https://redd.it/16ykw8p
@r_hackintosh
Sonoma and Broadcom BCM94360CS2
hi all,
I read that Sonoma had dropped Broadcom drivers for WiFi. Is Bluetooth still working though?
I am on Ventura and hesitate to upgrade for now (everything is working fine).
What would be the procedure to get my BCM94360CS2 card to work?
https://redd.it/16ylpnc
@r_hackintosh
Won't boot without -igfxvesa cpu spoof
Hello! I have recently hackintoshed my laptop which has an intel Celeron 3965y, and uses HD Graphics 615. HD Graphics 615 is supported however but the Celeron is not so I had to use a spoof for the CPU. My hex code for this spoof for the CPUID was A9060300 00000000 00000000 00000000. With this configuration, the system boots properly if I have the -igfxvesa flag, but without it, it goes through the basic CLI startup, and then a few moment after I get a couple messages saying itlwm: tasks task_add newstate_task add to queue. I did not see this message while booting with igfxvesa. I would prefer not boot with vesa as it is sluggish due to a lack of hardware acceleration. Linked here is a copy of my plist file: Plist Drive Link
https://redd.it/16y359u
@r_hackintosh
Fenvi T919 not working after Sonoma Update
Hello guys, not too sure if anyone else has this issue but I haven't seen it so far. I updated from Monterey to Sonoma just now, and everything is working except wifi. There is no issue with the card or the slot since wifi and bluetooth is working in windows and bluetooth in sonoma. Is there a kext that I should add that is necessary?
​
Specs: 10700k
MsiZ490 Pro -a
32gb corsair 3200 ram
6600xt
https://redd.it/16yic0u
@r_hackintosh
Is BCM94360NG also compatible for a Hackintosh build?
My respect to every member of this group. I have learned a lot of useful information thru this group when I was building my very first hackintosh.. So looking for an upgrade to my daily machine (Thinkpad T480) and planning to change the native wifi card to a Broadcom card. I looked into the FAQ section and in Dortania guide for the compatible hardwares. First in the list are BCM943602, BCM94360 and BCM94360CD. I looked this parts online but haven't found any available near me aside from BCM94360NG.. my question is will it be compatible for hackintosh?
Thank you guys so much!
https://redd.it/16yf9i3
@r_hackintosh
SUCCESS! macOS Sonoma - Dell Inspiron 15 3567, Intel Core i5 7200U Kaby Lake, NVMe, Touchscreen working
​
https://preview.redd.it/dzyl63x4c3sb1.png?width=1366&format=png&auto=webp&s=6b015b132b62cb0e7fd44852784e822f241d9fd8
My Hardware:
Intel Core i5-7200U
128GB NVMe SSD
24GB DDR4 (upgraded)
Intel HD Graphics 620 with acceleration
Intel AX210 Wifi + BT with experimental Airportitlwm.kext for Sonoma
​
Amazing performance and so much better than on Windows. Was able to get touchscreen working with VoodooI2C, it just brings the cursor and clicks where ever you touch but it works surprisingly well. The only things that don't work are Unlock with Apple Watch and AirDrop, other Continuity features work (like Continuity Widgets, Handoff, etc)
https://redd.it/16zae1c
@r_hackintosh
First Hackintosh build, help with side car and moving from Catalina
Hi!
Thanks to everyone in this community for the excellent resources for making a Hackintosh. I am using a Lenovo M900 tiny and I ultimately used juanpy0223 EFI after not having much success making my own from scratch (thought that's my next goal). I built this machine to use as the brains behind my guitar / bass pedalboard. I've been experimenting with windows, linux and IOS for this purpose and am of the belief that a Mac might be the best option (though I've yet to try it on my rig).
I would like to use Sidecar as my primary / only display with my 2nd generation iPad Pro 12.9. I'm not seeing it show up in the devices list on sidecar in Catalina. I'm also not seeing the iPad for Airplay anywhere either. To be clear, I don't have a wireless NIC or Bluetooth card yet, but my intent is to run sidecar over USB. I performed a port map which I believe I did correctly while windows was on this machine. The SMBIOS is configured as a iMac17,1.
I'd also like to look at moving to a later version of OSX, I attempted an upgrade from inside Catalina to Monterey last night, but was greeted with an error which I don't recall so I'm not able to expound much on that. Doh!
Thanks in advance for the help!
​
Not terribly exciting to you all, but I'm thrilled!
​
My Hardware:
CPU: i5 6600
GPU: Intel HD 530
RAM: 16GB DDR3L 1600
Motherboard/Laptop Make and Model: Lenovo M900 Tiny
Audio Codec: Realtek ALC223
Ethernet Card: Intel 12190LM
Wifi/BT Card: N/A
Touchpad and touch display devices: N/A
BIOS revision: FWKTBFA
https://redd.it/16zblse
@r_hackintosh
Sonoma Updated successfully on ThinkPad T14 Gen 1 (Intel)
Sonoma Updated successfully on my Laptop ThinkPad T14 Gen 1 (Intel). Almost works perfect as my main daily driver.
The specifications are:
MacOS Sonoma 14.0 with OpenCore 0.9.5
Intel(R) Core(TM) i5-10210U CPU @ 1.60GHz
NVME WD SN570 1TB 2280 gen3 x4
Intel UHD Graphics 630
Memory 32GB DDR4 3200Mhz
Audio Intel Smart Sound Technology: Realtek HDA ALC257 (aka ALC3287)
Intel Wi-Fi 6 AX201 802.11ax 2x2 with BT5.2 (Soldered on)
Not Working:
Internal Mic because of Intel SST. (*solved using mini usb mic)
Fingerprint
etc ?
Thank you
​
​
https://preview.redd.it/hnpogx7n93sb1.png?width=1920&format=png&auto=webp&s=c3a115ef458848245b140d5d29c15c98d873e806
https://redd.it/16z9xsy
@r_hackintosh
Trying to install Sonoma, but getting endless boot loop after first restart (?)
I'm stumped trying to clean install Sonoma, and I feel like it might be something so small that I'm missing/forgetting. I've had and maintained a daily-driven Hackintosh since 2018 - I'd call it a "golden build" since everything in the OS was working (WiFi, BT, Continuity, Airdrop, Handoff, Sidecar). It started on High Sierra and I've successfully upgraded/clean installed ever since through all newer MacOS versions up to the current Ventura. For reference:
CPU: Core i5-8400 Coffee Lake
GPU: Radeon RX-580 4GB (iGPU also works)
RAM: 32GB DDR4
Motherboard/Laptop Make and Model: Gigabyte Z370N-WiFi
Audio Codec: Realtek
Ethernet Card: Intel Gigabit
Wifi/BT Card: Broadcom BCM9436
Bootloader: Opencore 0.9.4 (currently w/Ventura)
Last week I started creating a new USB installer for Sonoma with OpenCore 0.9.4. I've done this many times over the years so it's nothing new for me. For the move to Sonoma I did the following:
\- Create new USB installer with MacOS Sonoma and OpenCore 0.9.4
\- Removed current, working NVMe SSD #1 (WD Blue SN570 500gb with Ventura/Opencore 0.9.4)
\- Installed new, tested and working SSD #2 (same, WD Blue SN570 500gb)
I turn the computer on with the Sonoma USB plugged in, get the OpenCore boot menu (as expected), and select INSTALL. At the recovery screen I use disk utility to erase the main SSD (MacOS Journaled, GUID) as I always have done with the past MacOS versions. Then I run the Sonoma installer and it gets going. After around 15 minutes or so, the system reboots (as expected)... and I see the OpenCore boot menu again (as expected). I select the "Installer" option to continue the install (as expected)... and then here's where it stops going as expected.
Instead of seeing the Apple logo and "xx minutes" as would normally happen, the screen will go blank, then the computer will restart. From here on out, after POST the screen will go blank (no Apple logo, no OpenCore boot menu), then restart again. Then POST, blank, then restart again. If I get into BIOS and force a boot to USB... it still does the same thing - POST, blank, restart. I cannot try to clear NVRAM since I never see the OpenCore boot menu. If I just let it be it will just repeat the same POST, blank, restart boot loop forever.
The only way to get out of this boot loop cycle is to physically swap back to SSD #1, then externally reformat SSD #2, then start over. I am a little discouraged since this is the first time since 2018 that I haven't figured out a solution to getting the latest MacOS working with my build.
If anyone has any ideas, I'm all ears.
https://redd.it/16z6rhs
@r_hackintosh
Lenovo m73 tiny hackintosh help
Ok so I did succeed in installing and running mac Ventura and Monterey but I couldn't get the Intel 4400 GPU to recognize. Am I missing something? I know I am xd which is why I'm here
https://redd.it/16z42vy
@r_hackintosh
Smart Tempo issue on Hackintosh on Ventura
Hello peoples!
I've come across a problem with Logic 10.7.9 and I'm reaching out to the Hackintosh community here to see if anyone has encountered a similar issue or can provide some guidance.
The Problem:
I heavily rely on my Hackintosh for music production. However, since updating to Ventura and Logic 10.7.9, I've been facing a Smart Tempo problem. It consistently misanalyzes the BPM, often displaying an unusual 252.9 BPM. Additionally, the "beat hints" feature isn't working as expected. Interestingly, my MacBook (no hackintosh), also running Ventura and Logic 10.7.9, doesn't have this issue.
Why It Matters:
My Hackintosh is my primary workstation for music creation and DJ set preparation, where beat matching, quantization and therefor Smart Tempo is essential. This problem is significantly disrupting my workflow.
Seeking Solutions:
Despite trying various troubleshooting steps, I haven't been able to resolve this issue, and it's becoming increasingly frustrating. If anyone has encountered a similar problem and found a solution, your insights would be greatly appreciated.
Ventura or Logic Issue?:
I'm curious to know if this problem is related to Ventura or Logic. If you've experienced this issue or have insights into which software might be responsible, please share your thoughts.
Considering an Upgrade:
I'm also contemplating upgrading to Sonoma, but I'm a bit cautious about updates. If you've made this upgrade and it resolved a similar issue, your feedback would be invaluable.
Upcoming Logic Updates?:
Lastly, I'm wondering if there's any information about an upcoming Logic update that might address this problem.
Your help and insights are highly appreciated! If you've encountered this issue or have any suggestions, please share your knowledge.
​
​
If you're interested, you can check out a discussion by someone else facing the same problem:
https://logic-users-group.com/threads/smart-tempo-analyze-producing-unexpected-results-in-update-to-10-7-7.12022/
​
​
Here are the specs of my setup:
CPU: Intel Core i9 10900K
GPU: Sapphire Radeon RX 5700 XT NITRO+ Videokaart
RAM: Corsair DDR4 Vengeance LPX 2x32GB 3600 Geheugenmodule
MEMORY: Samsung 970 EVO Plus 2TB M.2 SSD, Samsung 870 QVO 4TB, Seagate HDD 3.5" 8TB ST8000DM004 Barracuda
MOTHERBOARD: Gigabyte Z490 AORUS MASTER
CASE: be quiet! Dark Base Pro 900 rev. 2 Zwart/Zilver Big Tower behuizing
COOLING: Cooler Master MasterLiquid ML360R RGB
POWER: EVGA 850W GQ, 80+ GOLD
​
Thank you in advance!
https://redd.it/16z0tar
@r_hackintosh
I need help
Hi i have an old Lenovo laptop with an intel bay trail celeron n2830 w/ 4gb of ram and a 128ssd and i haven’t found any way to get mac os running, i am really tired of windows and i hate linux (no offense)
I really want to hackintosh this laptop because i want to experience the real macos experience and i have an iphone
So if anyone knows a way to get macos running on this piece of crap please tell me how and if not can anyone whose a developer make a way to run it on bay trail i really don’t care about smoothness
And if needed my preferred versions of macos are (mojave/ Catalina/ big sur)
And thank you
https://redd.it/16yy4dc
@r_hackintosh
How do I install hoRNDIS to then I stall Mac OS Catalina?
Henlo. I'm installing Mac OS on my PC but Ethernet is not working so I will have to tether. But then how do I install it cause I cannot go to finder. How do I do this? Thankyou for your help
https://redd.it/16yn350
@r_hackintosh
i5-8265U, UHD 620 (NO ACCELERATION)
Hello, i have issue with my setup. I cant get acceleration working.
I tried install opencore on my laptop years ago and i fell into that issue:
https://www.reddit.com/r/hackintosh/comments/stv7ws/whiskey_lake_i58265u_intel_uhd_620/
Now i want to try install hackintosh again. Could someone help me with this process?
(i dont need gaming performance, just xcode and ios emulator)
https://redd.it/16yoo0t
@r_hackintosh
Some guy on a hackintosh facebook page claiming that removing Intel ME (ala me_cleaner stuff) could bring hardware-based DRM to work on macOS 11+. Any correlations between these two stuffs or clickbait?
https://redd.it/16yowtm
@r_hackintosh
My Ethernet is not working
Henlo everyone. So I'm installing Mac Catalina on a PC and the Ethernet is not working, no blinking lights. Please help me 😭 and thankyou
Edit: I'm using the onboard Ethernet and the motherboard is zx-h61c/b75
https://redd.it/16ymk83
@r_hackintosh
Hackintosh on Dell latitude 5401 i5 9th
I want to install macos ventura on it .i have install it but the issue is usb is not working
I have tried every possible thing for it but i can succeed
If any one have the perfect efi for it please share it with me or help me to fix the issue thanks
https://redd.it/16ylaw5
@r_hackintosh
Need help
I need help building a hackintosh for my laptop the laptop is a
My laptop is a : Lenovo 500w gen 3
CPU: Intel(R) Pentium(R) Silver N6000 @ 1.10GHz GPU Model: Intel(R) HD Graphics Gen11 Keyboard: PS/2 Audio codac: Realtek ALC257 @ Intel Jasper Point PCH - cAVS (Audio, Voice, Speech) PCI Network Controller Models: Intel Jasper Point PCH - CNVi: WiFi (SKU 0) PCI Drive Model: SAMSUNG MZALQ256HBJD-00BL1 codec
https://redd.it/16yi9f5
@r_hackintosh
Hackintosh Wi-Fi and Bluetooth
Hello, I have just set up my first hackintosh. Would like to ask if Qualcomm Atheros (qualcomm atheros qca6174 espcially) are not working for hackintoshes? i found some kexts but they are for big sur or below. I have already installed intel bluetooth kexts and airport kext. Currently only available to access internet via android usb sharing.
As for Bluetooth, I remember seeing it detect a device once (didn’t try connecting), but now it just won’t turn on.
https://redd.it/16y398t
@r_hackintosh
13700K,Z790 Elite AX Can't Run AIRDROP
I have build a hackingtosh Recently.
My specs are:
Cpu:13700K
Mobo: Gigabyte Aorus Elite AX z790
Gpu: Amd 6800 XT
Ram: G Skill Trident Z5 16x2 5600Mhz
I can Run both Bluetooth And Wifi!
My Whener I am turning on my AIRDROP,
IT is not showing any Devices nearby!
(Also I can't connect my Mx Master 3s as it's getting dropped frequently)
Please help someone!
https://redd.it/16y9i1n
@r_hackintosh
