Kernel panic on T540p... again!
https://redd.it/1vfiu1t
@r_hackintosh
HP EliteBook 840 G5 - USB detected but OpenCore never appears, boots into BitLocker recovery instead
Hi everyone,
I've been trying to install macOS on my **HP EliteBook 840 G5 (Intel i5-8350U, UHD 620)** using OpenCore, but I can't even get to the OpenCore boot picker.
Here's what happens:
* The USB installer is created with **Rufus** using **macOS Recovery (BaseSystem.dmg + BaseSystem.chunklist)**.
* The USB contains:
* `EFI/BOOT/BOOTx64.efi`
* `EFI/OC/OpenCore.efi`
* `config.plist`
* ACPI, Drivers, Kexts, Resources, Tools, etc.
* The USB is detected in the **F9 Boot Menu**.
* BIOS settings:
* **UEFI only**
* **Legacy Support: Disabled**
* **Secure Boot: Disabled**
* **USB Storage Boot: Enabled**
* **Fast Boot: Disabled**
The problem is:
When I select the USB from the F9 boot menu, the screen goes black for a second, I briefly see "Windows" in the top-left corner, and then the laptop boots into the **BitLocker Recovery** screen asking for the recovery key. If I restart without the USB, Windows boots normally.
I **never** see the OpenCore picker.
I've already checked the BIOS settings multiple times, so I'm starting to think there's something wrong with my EFI or bootloader.
Has anyone seen this before?
Could this be caused by:
* an incorrect `BOOTx64.efi`?
* a broken `config.plist`?
* missing or incorrect UEFI drivers?
* something specific to HP EliteBooks?
Any help would be greatly appreciated.
https://redd.it/1vf7yxt
@r_hackintosh
hola soy nuevo en el hackintosh pero en 2horas ya ise un hackintosh
El Hackintosh lo hice en una HP EliteDesk 705 G4 Mini. Subí la EFI a GitHub; casi no la he probado, pero va bastante bien para estar hecha en 2 horas. Funciona la aceleración gráfica, 4 puertos USB y sonido por HDMI (sin bocinas internas ni Bluetooth, solo por Ethernet), pero para mí está bien, solo la uso como centro de entretenimiento en mi televisión, por eso lo considero así. Estas son las specs:
CPU: AMD Ryzen 5 2400GE Pro GPU: Radeon RX Vega 11 Graphics (Aceleración gráfica OK) RAM: 8 GB Almacenamiento: 256 GB NVMe PCIe x4 Gen 3 Tarjeta madre / Modelo: HP EliteDesk 705 G4 DM (Mini PC 65W) Audio: Sonido por HDMI (Sin bocinas internas) Tarjeta Ethernet: Realtek PCIe GBE Tarjeta Wi-Fi / BT: No funcional / No integrada (Solo uso Ethernet) Funcionando: Aceleración gráfica, puertos USB, salida de video y audio por HDMI, red por cable Ethernet. No funcionando: Bocinas internas, Bluetooth / Wi-Fi nativo. Revisión de BIOS: Q26 Ver. 02.23.00
Creación propia y no usé casi guías, solo un video pero no ayudó mucho; me apoyé un poco con la EFI de OpenCore Simplify y de ahí modifiqué con ProperTree y fui agregando kexts.
https://redd.it/1vf0a2g
@r_hackintosh
WiFi ain’t working? Help!
So I have a HP pro book it has an i five and 16 GB of RAM. I have my Ventura hackintosh working on it iMessage and FaceTime work when I connect to ethernet. Install heliport and there’s an X on it on the top on my bar I installed. The itwdb I think it’s called that. And when I click on it in my files, it says heliport cannot open files in the kernel extension format so when I install the airport.Itwdb I open teleport and nothing happens. It’s the same thing I use proper tree to save the snapshot and my configuration pilst and still it’s broken. How do I do it? I’m not looking to buy any Wi-Fi cards. I already have it set up.
https://redd.it/1vezjq0
@r_hackintosh
Hackintosh lagging and feeling sluggish after awhile, after loggging in
I have been using my hackintosh perfectly for about 1 week but all over a sudden i notice verbose mode takes abit long, apple logo itself takes time to load and when i reach the login screen and i enter my passward, i first see a dark gray wallpaper, then the dock loads and control centre appears then my wallpaper loads. But for me to even move the mouse or navigate around i have to wait for like a maximum of 5min for everything to feel responsive. I thought maybe i was using a macos version that my pc cant handle, before i was on sequioa i got the same issue and for it after like 4 days, then i switched to sonoma used it for a week and then same issue again. I have tried different solutions to pinpoint the exact issue, i re built my efi from scratch but all still give me the same issue. I dont know whats causing it cause i have been troubleshooting for like 4 days this issue but everything i try has failed.
My pc specs are:
System LENOVO_MT_20KH_BU_Think_FM_ThinkPad X1 Carbon 6th
Processor Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz, 2112 Mhz, 4 Core(s), 8 Logical Processor(s)
Ram 16 gigs
Storage 512 gigs ssd and its a LENSE20512MSP34MEAT2TA
if anyone who has solved this issue or has knowledge on how to solve it, I seek for assistance
My Config
https://redd.it/1vero57
@r_hackintosh
My update about successful hackbook pro from 2 months
https://redd.it/1veo738
@r_hackintosh
Particularly successful retro-hackintosh
https://redd.it/1vemudn
@r_hackintosh
Lenovo ThinkPad L460 Stuck on installer
https://redd.it/1veiymf
@r_hackintosh
Initiating a black screen
How can one initiate a black screen without access to the device
https://redd.it/1veb0ou
@r_hackintosh
I finally bought my first ThinkPad 🥳
https://redd.it/1ve914g
@r_hackintosh
Hackintosh on external SSD
Hi i’m trying to hackintosh my Huawei Matebook D14 (AMD) on macOS Ventura (maybe updating it to sequoia but since it has 8gb ram and haven’t found a efi i’m not too sure) but when i install it crashes i think because of the internal ssd that i can’t afford to change, i should have a spare sata m2 and could buy a generic adapter to usb c but would it be good or at least decent?
https://redd.it/1ve02a8
@r_hackintosh
Should I troubleshoot or restart?
I used opcore simplify and successfuly gotten to the apple logo but after a couple seconds my laptop shuts down. Should i atrempt to fix it, or is it worth it to just go with the guide and do everything myself?
https://redd.it/1vdt6rw
@r_hackintosh
UHD 630 brightness don't working
Hello everyone, I have a problem with brightness on my laptop, its hp-cb527tx, it has an intel i7-7700hq and uhd 630, I had installed macOS Monterey on my laptop, everything was working perfectly, but after I decided install macOS Sonoma, Ive updated all efi for that, and update os, but after that my brightness, stopped changing, it stucked on 50%, everything is working, brightness keys, in control center too, I can change it only to 0%, do you know to solve that?
(English is not my native language, excuse me for any mistake)
https://redd.it/1vdtaeh
@r_hackintosh
Mi primer exito de Hackintosh
https://redd.it/1vdplkh
@r_hackintosh
Best way to back up my Windows laptop before attempting a Hackintosh (no external drive)
Hi everyone,
I'm planning to experiment with installing macOS on my old Acer Aspire 7, which has become my secondary laptop now that I daily-drive a MacBook Pro.
Before I touch the partitions or install OpenCore/macOS, I want to create a complete backup of my current Windows installation so I can restore it if anything goes wrong.
The catch is that I don't have an external SSD/HDD available. However, I do have plenty of cloud storage (Google Drive, OneDrive, etc.).
What would you recommend as the safest approach?
I'd appreciate any advice or best practices. I'd rather spend a few extra hours making a proper backup than regret it later.
Thanks!
https://redd.it/1vdkx2b
@r_hackintosh
ZenMaster & ZenTune: Adjust Power Management Settings on Ryzen Hackintoshes
https://redd.it/1vfhjba
@r_hackintosh
Any project for making qualcomm atheros kext
My laptop has soldered qcnfa364a wifi card, so i can't replaced it to another one, Is anyone in here try to make kext for this
https://redd.it/1vf5moo
@r_hackintosh
Asahi Linux doubt
/r/AsahiLinux/comments/1vf176c/should_i_install_asahi_in_my_mac/
https://redd.it/1vf18ic
@r_hackintosh
Lenovo IdeaPad Gaming 3 15IMH05 . tahoe and Sequoia Cant get my iGPU Intel UHD 630 acceleration on
Hi guys. Please if you can help me, I have tried both tahoe and Sequoia. the laptop boots into the macos without iGPU acceleration as u can see in the first pic
boot success
my efi at that moment was :
https://preview.redd.it/y32fex20b8hh1.png?width=1445&format=png&auto=webp&s=01cc6c3147cac1d07ffec55330154a707d185fb9
now i tried the patch and dortaine guidelines and my boot stuck here .
stuck . the screen dims suddenly like it was trying to switch to a connector but fails and boot.
with HDMI inserted
without HDMI inserted
here is my current efi :
boot args
currnet EFI
I tried to change con0/con1 .. etc. changed type hex values. all same result.. dim then stuck
any help please?
https://redd.it/1veqxam
@r_hackintosh
Successful 2nd Hackintosh!
https://redd.it/1veqaxd
@r_hackintosh
What is Change _OSI to XOSI?
Im following the dortania tutorial and i got to the part that says OSI rename. i saw an old post here with no answer so i hope to get an answer as to what that means. here is a photo from my ProperTree:
https://preview.redd.it/xgqg6nifr7hh1.png?width=1862&format=png&auto=webp&s=8dc4a0c8d748cc35e35cdf2f3f1a2210433b4eac
I dont see any field saying OSI here. I am using SSDT-XOSI so i do need to perform this rename.
https://redd.it/1vent73
@r_hackintosh
Bios fptw64.exe
Hi, theres somebody who knows Where i can find the fptw64.exe for flash mi modified bios?
https://redd.it/1veithg
@r_hackintosh
This post was sent from unsupported wifi card. I will begin working on gui wrapping .
https://redd.it/1vegptb
@r_hackintosh
EB LOG:EXIBITS:START when instaling Tahoe
Specs:
i7 10750h
igpu: UHD 630
idk what other specs are needed so please tell me
i tried everything on here. right now it boots to the preinstall, flashes some text and it just reboots.
my kexts:
https://preview.redd.it/r7ruv87c95hh1.png?width=602&format=png&auto=webp&s=37429335155f211cccb09cdbae1701634e898ad4
https://redd.it/1vealrb
@r_hackintosh
Which drive should i chose?
i have now decided to ditch opcore simlify and follow the dortania tutorial. i got to the finding the drive model and im not sure which drive to chose. i have 2 drives:
https://preview.redd.it/5rl4xzrnp3hh1.png?width=893&format=png&auto=webp&s=0cf10fa919f120232c4a96f49a5bb10b82fc47aa
i made a 150gb partition on the Verbatim Vi550 S3 drive on which im gonna install the macos. should i write down just it or both of the drives?
https://redd.it/1ve53jm
@r_hackintosh
Hackintosh HDMI Audio Issue - HD4600 Haswell Desktop
System specs:
\- CPU: Intel Core i5-4440 (Haswell)
\- GPU: Intel HD Graphics 4600
\- Motherboard: Gigabyte B85 series
\- macOS: Sequoia 15.4.8 with OCLP root patch
\- OpenCore: 0.8.8 (via OpCore Simplify)
\- SMBIOS: iMac14,4
\- Framebuffer: 0x0D220003
Problem: IOHDACodecDevice@3,0 stays !registered, !matched — HDMI audio never initializes.
What we confirmed works:
\- Video acceleration with OCLP root patch ✅
\- Analog audio (ALC892, layout-id 1) ✅
\- All connectors showing as HDMI (connector-type = 00080000) ✅
\- hda-gfx = onboard-1 injected on HDEF, IGPU and HDAU ✅
\- device-id = 0x0C0A spoof on HDAU ✅
\- AppleHDAController loads and creates child IOHDACodecDevice@3,0 ✅
What we tried without success:
\- All BusID values (0x01, 0x02, 0x04, 0x05, 0x06) on con1/con2
\- framebuffer-conX patches (type, busid, flags, pipe)
\- framebuffer-con0-alldata replacement
\- hda-gfx on all three PCI paths
\- device-id spoofing (0x0C0A)
\- WhateverGreen boot args (-igfxhdmidivfix)
\- Modified CodecAddressFilterArray in both /System and /Library AppleHDAController.kext to include Intel codec PCIVendorDeviceID = 2155905031 (0x80862807)
\- Rebuilt kext cache after modification
Root cause identified: AppleHDAController has a CodecAddressFilterArray that only whitelists Realtek codecs. Even after modifying both copies of the kext, the IOHDACodecDevice@3,0 still won't register. The OCLP legacy framebuffer driver (AppleIntelFramebufferAzul) appears to not send the display-active signal that the HDA codec needs to initialize.
Question: Has anyone successfully achieved HDMI audio with HD4600 iGPU on macOS Sequoia with OCLP? What specific fix was required? Help me
https://redd.it/1ve072c
@r_hackintosh
Making solution for unsupported wifi card
https://redd.it/1vdwae7
@r_hackintosh
USB installer wont boot after Monterey install.
https://redd.it/1vdtqmb
@r_hackintosh
Where's Opencore GUI Picker?
https://redd.it/1vdpawh
@r_hackintosh
planning on dual booting macos tahoe in my laptop
hi everyone, i want to dual boot macos tahoe on my laptop using a 64gb flash drive, im currently running windows 11 on my ssd but i dont want to put macos on my ssd since its pretty full (like only 10gb free) and i also really dont want to corrupt or format my windows installation since it has some super important files that i really dont want to get deleted, anyway heres my specs
laptop: lenovo thinkpad yoga x1
Processor: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz 2.71 GHz
gpu: integrated gpu (intel hd 620)
Installed RAM: 8.00 GB (7.85 GB usable)
System type 64-bit operating system, x64-based processor
Pen and touch: Pen and touch support with 10 touch points
Edition Windows 11 Pro
Version 21H2
Installed on 2/29/2024
OS build 22000.2538
Experience Windows Feature Experience Pack 1000.22001.1000.0
https://redd.it/1vdl114
@r_hackintosh
