Can I install hackintosh on gaming laptop? Hp Omen 16 (Ryzen 7 ai 350 and 5060/radeon 860M)
Same as title
https://redd.it/1v0ko07
@r_hackintosh
Sonoma iHack Pro
https://redd.it/1v0fz5u
@r_hackintosh
I services Not Working On OS X Yosemite
Hi, I got my hackintosh up and running mostly perfect, but when I tried logging into iCloud services it won't let me activate, even though my serials are not used by any Macs, if anyone know please tell me how do I get it working, I also followed the guide and it didn't work.
https://redd.it/1v0dxfo
@r_hackintosh
Help with gpu
hey what DGPU should i use for tahoe becouse my rt x 4060 is not supported.i have very small budget so i need very cheap options
https://redd.it/1v00oxi
@r_hackintosh
Boot chime only plays on debug version of opencore
When setting up the boot chime it only works when I'm using the debug version of opencore, when I turn off debugging and swap the files from debug to release it stops working, Any fix for this issue?
Edit: it works all of a sudden
https://redd.it/1uzgtb0
@r_hackintosh
Hackintosh Help w/ Ryzen 9 5900X + RX 6700XT
Like the title says I am trying to run hackintosh with a Ryzen 9 5900X, an RX 6700XT and my motherboard being the AORUS X570 Pro Wifi.
I can’t really follow guides too well since they make me overstimulated and I’ve tried a lot and it just gives a bunch of errors. Has anyone successfully got hackintosh working on this specific hardware and will be willing to share on how they did it? I am mad about Windows and would like to just be on MacOS.
https://redd.it/1uzbtxw
@r_hackintosh
Need advice for installing Hackintosh on my ASUS VivoBook X507UAR (i3-7020U, HD 620) – High Sierra or Sierra?
I'm planning to install macOS on my old ASUS VivoBook X507UAR mainly to experiment with macOS and learn a bit about the ecosystem. Based on a compatibility checker, I'm thinking of installing either High Sierra (10.13.6) or Sierra.
Here are my specs:
Laptop: ASUS VivoBook X507UAR
CPU: Intel Core i3-7020U (Kaby Lake)
GPU: Intel HD Graphics 620
RAM: 8 GB (planning to upgrade later)
Storage: 1 TB HDD (Seagate ST1000LM035 1 TB HDD (2.5" SATA)
Wi-Fi: Qualcomm Atheros AR9565
Bluetooth: Qualcomm Atheros 4.0
Audio: Realtek
From the compatibility checker:
CPU/GPU seem to be supported.
SATA controller is supported.
Wi-Fi/Bluetooth (Atheros AR9565) appears to be the main issue.
SD card reader is unsupported.
A few questions:
1. Would you recommend High Sierra over Sierra, or is there another version that's a better fit for this hardware?
2. Has anyone installed macOS on the X507UAR or a similar laptop?
3. Will the Atheros Wi-Fi work with any kexts, or should I just plan on using Ethernet/USB Wi-Fi?
4. Is OpenCore the recommended bootloader for this setup?
5. Since the laptop has only a 1 TB HDD (no SSD yet), how usable will High Sierra be for basic browsing and learning macOS?
Any EFI repos, guides, or tips for this specific hardware would be greatly appreciated. Thanks!
https://preview.redd.it/oa5p8w23lsdh1.png?width=1391&format=png&auto=webp&s=dd02453ce1448d30717322199a9649d6690c0297
https://redd.it/1uyz83i
@r_hackintosh
Any MacOS I can install
Is there any sort of macOS I can use to install on my desktop?
For context my specs are:
Intel core i5-10500
AMD RX 9060 XT
32GB RAM (Unsure if DDR4 or DDR5)
1.14TB SSD
How I’ve heard that it isn’t supported, but I’m assuming that this is for the latest version
Would anyone here know if it’s supported at all, or if I should just use the integrated processor
https://redd.it/1uz109g
@r_hackintosh
Old i3 desktop
I have an old desktop i3 6th gen 16Gb ram and 256gb SSD, may I install any hackintosh on it?
https://redd.it/1uyvgvj
@r_hackintosh
Hackintosh help
Ece que quelqu’un sait si mac os thaoe est compatible avec la gtx 970?
https://redd.it/1uysv7v
@r_hackintosh
Touchpad Dell 7410 10th
Hey person, I changed my notebook that had a Lenovo S145 i7 also of 10 Generation, but it was an Ice Lake, so I changed it for this Dell Latitude 7410.
He’s almost perfect...
It’s running smoothly, smoothly... but I’m having a huge trouble making this Touchpad work perfectly, it even works, but it gives a lot of lag, I even thought it was from the system, but it’s not.
I tested a mouse and it worked perfectly.
I deactivated the touch screen and it still lags on the touchpad, does anyone know anything I can do?
I’ve tried everything, I’m editing SSDT based on this EFI: https://github.com/abbasabidii/Dell-Latitude-7410-Hackintosh-OC
But it doesn’t work right either, does anyone know anything else?
My configuration:
Dell Latitude 7410 - Comet Lake
I7 - 10610U
16 GB of RAM
XPG Legend 710 SSD
WiFi Intel AX201
https://redd.it/1uygsws
@r_hackintosh
Hackintosh HP 15-AX
https://redd.it/1uyb5u8
@r_hackintosh
Hello, can you guys help me with troubleshooting this hackintosh error. (Macos 12)
https://redd.it/1uy5ffn
@r_hackintosh
Help Persistent Black Screen & TDR Failures on RX 6800 / i9-10850K / Z490 Vision G during heavy GPU load
Hello r/hackintosh community,
I am a motion graphics/VFX professional, and I've been battling a recurring stability issue on my build for nearly two years. It's reached a point where it's affecting my professional workflow. I’m looking for expert insight on a deep-level interaction between the board's power management and my GPU.
System Specs:
CPU: Intel Core i9-10850K (Comet Lake-S)
Motherboard: Gigabyte Z490 Vision G (BIOS: F24a)
GPU: XFX SWFT 319 AMD Radeon RX 6800
WiFi/BT card: BCM94360CD PCIe
macOS Version: 26.4.1 (25E253)
OpenCore: 1.0.7
Monitor: U32R59x 4K (via DP)
The Issue:
The system runs fine for general tasks. However, under heavy load (Adobe Premiere, After Effects, Blender), or specifically when waking from sleep, the screen goes black, followed by audio stuttering and a system freeze, forcing a hard shutdown.
Crucially, when the system doesn't crash, it exhibits visual corruption (Red/Green artifacts) during rendering.
What I have tried (Exhaustive Troubleshooting):
I have spent months testing everything possible, adhering to standard guides and community documentation:
1. PCIe & GPU config: Tested 200+ `DeviceProperties` variations, including spoofing.
2. Software stack: Tested multiple macOS versions and various combinations of `WhateverGreen`/`Lilu`.
3. Kernel/Kexts: Tried `NootRX` as a replacement for `WhateverGreen`, tried countless `Smbios` profiles.
4. Hardware/ACPI: Built the EFI from scratch over 10 times, flashed motherboard BIOS, and flashed GPU VBIOS.
5. Power Management: Created endless custom `SSDTs`, tested raw/modified `PowerPlayTable`.
6. Isolation: Disconnected all Windows drives, clean macOS installs.
7. Guides: Followed all known guides strictly, including community-recommended configurations.
Current Technical Findings:
The Error: I captured an AmdTTLError in IOReg: (16874046988:[3:0:0] Error SW_IP_CLIENT_ID__GC: event_id=0xc00c0401). This indicates a TDR (Timeout Detection and Recovery) Failure in the GC (Graphics Compute) unit.
Power Management Conflict: I suspect a deep conflict between the board's native ASPM (Active State Power Management) methods—specifically `L0SE` and `L23E` in the DSDT—and macOS power management. macOS doesn't seem to have full control over the PCIe transition, leading to the TDR error when the GPU attempts to jump to high-performance states.
Current status: I am currently testing an SSDT-XOSI implementation to override _OSI calls and force the board to expose Windows-compatible power features, alongside an simplified DeviceProperties config (using PP_DisableClockStretcher and PP_WorkLoadPolicyMask).
The Question:
Has anyone successfully resolved an AmdTTLError on a Comet Lake/Z490 platform with an RDNA2 card? Specifically, I need to know if there's a specific way to align the DSDT's native power management methods with macOS to avoid the TDR failure upon wake/heavy load transitions.
Any logs or deeper debugging advice would be highly appreciated.
https://redd.it/1uxwrqt
@r_hackintosh
Hackintosh Intel Core Ultra 7 270K Plus / Sequoia 15.7.7 / Airdrop
https://redd.it/1uxs9ik
@r_hackintosh
Brightness control not working on DELL latitude 7480 (Intel HD 620)
Hi, I need some help with a brightness issue on my Hackintosh.
Specs:
\- Dell Latitude 7480
\- i7-7600U (Kaby Lake)
\- Intel HD 620
\- 16GB RAM
\- macOS Sonoma
The brightness controls are detected:
\- F11/F12 keys work
\- macOS brightness slider works
But the actual brightness does not change. It behaves like:
0% = screen turns off
1%-100% = full brightness
I already tried a custom SSDT-PNLF built for my ACPI tables. I also tested changing "GFX0" to "IGPU", but then the brightness slider disappeared completely.
Everything else works (graphics acceleration, WiFi, audio, battery, trackpad, etc.).
Any one did go through it and actually solved it ?
https://redd.it/1v0h0li
@r_hackintosh
Hackintosh on Lenovo ThinkPad T16 Gen 1
https://redd.it/1v0fgpe
@r_hackintosh
(mostly) Successful Big Sur Hackintosh on Dell Precision T1700!
https://redd.it/1v0b3tw
@r_hackintosh
How I fix my HDMI port on my laptop please?
https://preview.redd.it/pq2bs6876zdh1.png?width=1920&format=png&auto=webp&s=e0048fb89a243b110d3899436f22f27f4758ee28
Because I already do this but it doesn't work when I test it on my monitor...
https://redd.it/1uztly8
@r_hackintosh
Problems with FaceTime/iMessage Access
Hi everyone, I'm new here. I recently installed macOS Sequoia on my Dell Latitude 7310 and noticed that while I can log in to iCloud and the App Store, I can't log in to iMessage or FaceTime. When I log in to FaceTime and iMessage with the same Apple ID that I previously linked on my Hackintosh (i.e., on iCloud and the App Store), it logs me out after about 5–6 seconds. I’ve checked various sources online, such as: I’m using an Intel AX201 Wi-Fi card (I use itlwm), and it detects it as both en0 and built-in. The ROM matches the MAC address of my Intel Wi-Fi card (i.e., en0). I’ve given up hope because I’ve tried regenerating the SMBIOS over and over, and it still doesn’t work.
https://redd.it/1uzedsf
@r_hackintosh
Hackintosh boot error
**Title:**
OpenCore/macOS Recovery hangs after AHCI init on HP ProDesk 400 G5 SFF (i5-8500, UHD 630) - SATA/DVD drive issue?
**Post:**
Hi everyone,
I'm trying to install macOS using OpenCore on my **HP ProDesk 400 G5 SFF**, but I'm running into what seems like a SATA-related issue.
**Hardware:**
* HP ProDesk 400 G5 SFF
* Intel Core i5-8500 (Coffee Lake, UHD 630)
* Intel 300-series chipset
* Intel UHD 630 (iGPU only)
* Realtek RTL8111 Ethernet
* Conexant CX5098 audio codec
* SATA SSD
* Internal SATA DVD drive
* SMBIOS: iMac19,1
**EFI:**
* OpenCore (latest)
* Lilu
* VirtualSMC
* WhateverGreen
* AppleALC
* RealtekRTL8111
* USBToolBox
* UTBDefault
* SSDT-EC
* SSDT-PLUG
* SSDT-AWAC
* SSDT-PMC
# Problem #1 (DVD drive connected)
When the internal SATA DVD drive is connected, OpenCore reaches macOS Recovery but starts endlessly spamming messages like:
AbortCommands::5382: Port2 - Called, DeviceWithError = 0, ErrCode = 0xE0030005
It never progresses.
# Problem #2 (DVD drive disconnected)
If I unplug the SATA DVD drive, the spam disappears.
Instead, Recovery gets to:
Successfully initialized AHCI Controller
Then it just hangs there forever.
I also occasionally see:
USBToolBox failed
SMCSuperIO failed to detect SuperIO chip
From what I've read, those messages are usually harmless and shouldn't prevent booting.
# BIOS settings
* SATA Mode: AHCI
* Secure Boot: Disabled
* CFG Lock: Disabled
* VT-d: Disabled
* CSM: Disabled
# Things I've already tried
* Different USB ports
* Disconnecting the DVD drive
* Disabling SATA Port 2 in BIOS
* Rebuilding the EFI
* Using iMac19,1 SMBIOS
* Verifying ACPI and kexts
Has anyone seen an HP ProDesk 400 G5 hang immediately after **"Successfully initialized AHCI Controller"** or had the `AbortCommands::5382` errors caused by the internal SATA DVD drive?
Any ideas on what I should check next would be greatly appreciated. Thanks!
F:\>tree
Folder PATH listing for volume EFI
Volume serial number is 000000A7 B81E:6AC2
F:.
├───com.apple.recovery.boot
└───EFI
├───BOOT
└───OC
├───ACPI
├───Drivers
├───Kexts
│ ├───AppleALC.kext
│ │ └───Contents
│ │ └───MacOS
│ ├───Lilu.kext
│ │ └───Contents
│ │ └───MacOS
│ ├───RealtekRTL8111.kext
│ │ └───Contents
│ │ ├───_CodeSignature
│ │ └───MacOS
│ ├───SMCProcessor.kext
│ │ └───Contents
│ │ └───MacOS
│ ├───SMCSuperIO.kext
│ │ └───Contents
│ │ └───MacOS
│ ├───USBToolBox.kext
│ │ └───Contents
│ │ └───MacOS
│ ├───UTBDefault.kext
│ │ └───Contents
│ ├───VirtualSMC.kext
│ │ └───Contents
│ │ └───MacOS
│ └───WhateverGreen.kext
│ └───Contents
│ └───MacOS
├───Resources
│ ├───Audio
│ ├───Font
│ ├───Image
│ └───Label
└───Tools
F:\>
https://redd.it/1uz8oi7
@r_hackintosh
Ryzentosh With RX6800
https://preview.redd.it/jljtqndtwsdh1.png?width=2560&format=png&auto=webp&s=d170ce487033d55a65db2c46fd5ed36e60d31469
Ryzentosh OpenCore
CPU: Ryzen 7 5700X3D
GPU: Radeon RX 6800
Memory: Corsair vengeance 32GB 3200MHZ DDR4
Motherboard: Gigabyte B550M DSH3
Storage: 2 1TB Sata SSDs, 2 512GB NVMe SSDs
macOS Version: Tahoe 26.5
SMBios: MacPro7,1
No WiFi or Bluetooth present
https://redd.it/1uz1oqv
@r_hackintosh
Can the Ultra UB540 run any version of macOS? Thinking about making a Hackintosh for my girlfriend.
Hey everyone,
My girlfriend has an Ultra UB540 that she mainly uses for college. A few days ago she discovers the macOS and asked what it was like because she'd never used a Mac before. That got me thinking it would be a fun project to turn her laptop into a Hackintosh, if it's actually possible.
I've never built a Hackintosh before, so I'm trying to figure out if this is worth the effort or if I'm just going to spend days fighting with drivers and OpenCore.
From what I found, it has an i5-1135G7, Intel Iris Xe graphics, 8GB of RAM, a 256GB NVMe SSD and Intel Wi-Fi.
Has anyone here tried installing macOS on this model, or at least on a similar Tiger Lake laptop? I'm mostly wondering if the graphics acceleration works properly, if Wi-Fi and Bluetooth can be made to work, and whether sleep, audio and the trackpad are usable.
I'm also curious which version of macOS makes the most sense. Is Sequoia realistic? What about Tahoe? Or is something like Sonoma or Ventura a much better choice?
She'd only be using it for studying, web browsing, YouTube, Spotify and Office, so it doesn't need to be perfect. I just don't want to get halfway through the project and find out this laptop is basically unsupported.
If anyone has experience with this machine or with Tiger Lake Hackintoshes in general, I'd really appreciate any advice.
https://redd.it/1uyzv9a
@r_hackintosh
Hi, I have a Thinkpad t590 i5 8th gen 16gb ddr4 and 256gb SSD, which version of hackintosh may I install?
Thinkpad T590
https://redd.it/1uysmhk
@r_hackintosh
Finally after 2 days of trying...
https://redd.it/1uylm5l
@r_hackintosh
Sleep disables "network activity"
In sequoia recovery right now and while it installs it keeps falling asleep. After waking and checking the installer log it shows the network activity being disabled and when I press any key it takes me back to the "Reinstall Seqouia" screen. Anyone know how to disable sleeping in config?
https://redd.it/1uydn7m
@r_hackintosh
Sorry for asking again.
Can I install for example sonoma? On such specifications intel i5 11th 1135g7 Gpu intel iris xe grahics
https://redd.it/1uy92i7
@r_hackintosh
Dell latitude 3310 i3 whiskey lake help!
So I got sequoia downloaded, but I can’t play sound, the hdmi doesn’t work, Bluetooth doesn’t work, airdrop doesn’t work and mic doesn’t work what do I do, everything else is okay
https://redd.it/1uxyka4
@r_hackintosh
[Help] Persistent Black Screen & TDR Failures on RX 6800 / i9-10850K / Z490 Vision G during heavy GPU load
/r/hackintosh/comments/1uxwrqt/help_persistent_black_screen_tdr_failures_on_rx/
https://redd.it/1uxwrya
@r_hackintosh
Identifying wifi card
https://redd.it/1uxr0ww
@r_hackintosh
